Product Description
This is our new product,servo motor,it is used in AGV vehicle,Robot driving system, tracked cars.Motor power up to 200w/500W/800W/1000W/1.5kw(2hp).volt is 48V,speed is 1500r/min.
1.Protection grade:IP65, insulation grade:F
2.Winding overhang structure optimization, to minimize the copper loss and iron loss minimization, small volume, light weight, low temperature rise, high efficiency
3.Super high coercivity, the maximum magnetic energy product NdFe35 permanent magnetic materials, strong resistance to demagnetization, motor performance is stable.
4.Low noise, low vibration, low moment of inertia.
5.High torque, fast dynamic response, wide speed range, strong overload capacity (four times)
1.Product Features:
| a. Protection grade:IP55, insulation grade:F |
| b. Winding overhang structure optimization, to minimize the copper loss and iron loss minimization, small volume, light weight, low temperature rise, high efficiency |
| c. Super high coercivity, the maximum magnetic energy product NdFe35 permanent magnetic materials, strong resistance to demagnetization, motor performance is stable. |
| d. Low noise, low vibration, low moment of inertia. |
| e. High torque, fast dynamic response, wide speed range, strong overload capacity (four times) |
2.Features:
|
1)High Torque to inertia ratio&up to 15000Nm/kgm² |
|
2)Fast dynamic response *time constant <20ms |
|
3)Wide speed adjusting&feedback up to 1000:1 |
|
4)Steady speed precision up to 0.5% |
|
5)High overload,2Mn/30s,3.5N.m/10s |
|
6)Small volume and light |
|
7)Silent,the lowest noise is only 45dB(A) |
|
8)Protected with IP55,Class F insulation |
3.Industry class:
a. The altitude should be over 1000 CHINAMFG above sea level
b. Environment temperature:-25ºC~+50ºC
c. The month average tallest relative humidity is 90%,at the same the month average lowest temperature is less than 25ºC
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Operating Speed: | Adjust Speed |
| Excitation Mode: | Excited |
| Function: | Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 10 |
| Customization: |
Available
|
|
|---|
Can you describe the various types and configurations of worm wheels available?
There are several types and configurations of worm wheels available to suit different applications and requirements. Here’s a description of the various types and configurations:
- Single-Threaded Worm Wheel: This is the most common type of worm wheel configuration. It has a single thread on its circumference that meshes with the worm gear. Single-threaded worm wheels provide a high gear reduction ratio and are used in applications where high torque and low-speed operation are required.
- Double-Threaded Worm Wheel: Double-threaded worm wheels have two threads on their circumference, which results in increased contact area and improved load distribution. This configuration allows for higher torque transmission capacity and smoother operation. Double-threaded worm wheels are utilized in applications that require even higher torque output and improved efficiency.
- Non-Cylindrical Worm Wheel: In some cases, the worm wheel may have a non-cylindrical shape. For example, it can have a concave or convex profile. Non-cylindrical worm wheels are used in specific applications where the shape is designed to accommodate unique requirements such as increased contact area, improved load distribution, or specialized motion control.
- Enveloping Worm Wheel: Enveloping worm wheels have specialized tooth profiles that provide increased contact area and improved load-carrying capacity. The teeth of the worm wheel wrap around the helical threads of the worm gear, resulting in enhanced meshing and load distribution. Enveloping worm wheels are typically used in high-load applications that require superior torque transmission and durability.
- Hypoid Worm Wheel: Hypoid worm wheels are designed with a hypoid offset, meaning that the centerline of the worm gear is offset from the centerline of the worm wheel. This configuration allows for smoother meshing and increased contact area, leading to improved load distribution and reduced wear. Hypoid worm wheels are often utilized in applications that require high torque, compact design, and smooth operation.
- Materials: Worm wheels can be made from a variety of materials depending on the application requirements. Common materials include steel, bronze, brass, and specialized alloys. Steel worm wheels offer high strength and durability, while bronze and brass worm wheels provide excellent wear resistance and self-lubricating properties. The choice of material depends on factors such as load capacity, operating conditions, and cost considerations.
These are some of the types and configurations of worm wheels available. The selection of a particular type depends on the specific application requirements, including torque, speed, load capacity, space constraints, and desired efficiency. It’s important to consider factors such as tooth profile, material selection, and manufacturing precision to ensure the reliable and efficient operation of the worm wheel in a given application.
Can you provide examples of products or machinery that use worm wheels in their systems?
Yes, there are numerous products and machinery that utilize worm wheels as integral components in their systems. Here are some examples:
- Elevators: Worm wheels are commonly used in elevator systems to control the vertical movement of the elevator car. The high gear reduction ratio of the worm wheel allows for precise and controlled lifting and lowering of the elevator. The self-locking property of the worm wheel ensures that the elevator remains stationary at each floor, enhancing safety and stability.
- Conveyors: Conveyors, such as belt conveyors or screw conveyors, often incorporate worm wheels to drive the movement of the conveyor belt or screw. The gear reduction provided by the worm wheel allows for controlled and synchronized material handling in industries such as manufacturing, mining, and logistics.
- Automotive Applications: Worm wheels are utilized in various automotive applications. For example, power steering systems use worm wheels to convert the rotational motion of the steering wheel into the linear motion required for steering the vehicle. Additionally, some automotive seat adjustment mechanisms and convertible roof systems use worm wheels for precise positioning and control.
- Machine Tools: Worm wheels are found in machine tools like milling machines, lathes, and grinders. They are often used in the feed mechanisms to control the movement of the workpiece or cutting tool with high precision and accuracy. The high gear reduction ratio of the worm wheel enables fine adjustments of the feed rate and ensures stable and controlled machining operations.
- Robotics: Worm wheels are employed in various robotic systems for precise motion control. They can be found in robotic arms, grippers, and joints, allowing for accurate positioning and movement. The self-locking property of the worm wheel ensures that the robot maintains its position when not actively driven, providing stability and safety in robotic applications.
- Positioning Systems: Precision positioning systems, such as linear stages or rotary stages, utilize worm wheels to achieve accurate and repeatable motion. These systems are commonly used in semiconductor manufacturing, optics, microscopy, and other industries where precise positioning is critical. Worm wheels provide the necessary gear reduction and precise control required for precise positioning applications.
- Gate Operators: Worm wheels are employed in gate operator systems to control the opening and closing of gates, such as in residential or commercial gate automation. The gear reduction provided by the worm wheel allows for controlled and smooth operation of the gate, ensuring security and convenience.
- Industrial Mixers: Worm wheels are used in industrial mixers and agitators to control the rotational speed and torque applied to the mixing blades. The gear reduction ratio of the worm wheel enables precise control of the mixing process, ensuring efficient and consistent mixing of various substances in industries like chemical processing and food production.
These examples illustrate the wide range of applications where worm wheels are utilized to provide precise motion control, torque management, and reliable performance. Their versatility and ability to control speed, torque, and direction make them valuable components in various products and machinery.
In what industries or applications are worm wheels commonly utilized?
Worm wheels, in conjunction with worm gears, find wide applications across various industries that require precise motion control, high torque, and compact design. Here’s a detailed explanation of the industries and applications where worm wheels are commonly utilized:
1. Automotive Industry: Worm wheels are used in automotive applications, such as power steering systems. They provide the necessary gear reduction to convert the rotational motion from the steering wheel into the appropriate steering force, enabling smooth and responsive steering control.
2. Industrial Machinery: Worm wheels are widely employed in various industrial machinery applications, including machine tools, conveyors, packaging machines, and material handling equipment. They provide reliable and efficient power transmission, enabling precise control of speed and torque in these systems.
3. Elevators: Worm wheels play a vital role in elevator systems, where they are used in the elevator drive mechanism to control the movement of the elevator car. They provide the necessary gear reduction to ensure smooth and controlled vertical motion, along with the ability to hold the car in position when the power is removed.
4. Robotics: Worm wheels are commonly utilized in robotic systems, particularly in robot joints and manipulators. They allow for precise and controlled movement, enabling robots to perform intricate tasks with accuracy and repeatability.
5. Printing Presses: Printing presses often employ worm wheels in their drive systems. The worm gear and worm wheel combination helps in achieving the required gear reduction for controlling the paper feed and maintaining consistent print quality.
6. Conveyor Systems: Worm wheels are found in conveyor systems that require controlled and synchronized movement of goods or materials. They provide the necessary torque and gear reduction to ensure smooth and efficient operation of the conveyor belts or rollers.
7. Agriculture and Farming: Worm wheels are utilized in various agricultural machinery, such as tractor attachments, harvesting equipment, and irrigation systems. They facilitate the transmission of power and control the rotational motion required for specific farming operations.
8. Renewable Energy: Worm wheels are used in renewable energy applications, including wind turbines and solar tracking systems. They help in achieving the required gear reduction to optimize power generation and ensure efficient tracking of the sun or wind direction.
9. Food Processing: Worm wheels are employed in food processing equipment, such as mixers, grinders, and dough kneaders. They provide the necessary gear reduction and enable precise control of rotational speed for efficient food preparation and processing.
10. Medical Equipment: Worm wheels find applications in medical equipment, such as surgical robots, imaging devices, and patient positioning systems. They contribute to precise and controlled movements, enabling accurate medical procedures and patient care.
These are just a few examples of the industries and applications where worm wheels are commonly utilized. Their ability to provide high gear reduction, compact design, and reliable power transmission makes them suitable for a wide range of mechanical systems that require precise motion control and high torque output.
editor by Dream 2024-05-09
China wholesaler Straight Tooth Rack Gear in Nylon DC Mini Worm Gear Motor in POM Custom Moulded Gear Parts
Product Description
straight tooth rack gear in nylon dc mini worm gear motor in pom custom moulded gear parts
straight tooth rack gear in nylon dc mini worm gear motor in pom custom moulded gear parts
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Soft Tooth Surface |
| Gear Position: | Internal Gear |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Nylon |
| Customization: |
Available
|
|
|---|
How do worm wheels contribute to the adaptability and versatility of mechanical systems in different settings?
Worm wheels play a significant role in enhancing the adaptability and versatility of mechanical systems across various settings. Here’s a detailed explanation of how worm wheels contribute to these aspects:
- Variable Speed Ratios: Worm wheels allow for the transmission of motion between the worm and the wheel with variable speed ratios. By changing the number of teeth on the worm wheel or the pitch diameter of the worm, different speed ratios can be achieved. This flexibility in speed control enables mechanical systems to adapt to different operating conditions, accommodate varying load requirements, and provide the desired output speeds for specific applications.
- Directional Reversibility: One of the key advantages of worm wheels is their ability to transmit motion in both clockwise and counterclockwise directions. By reversing the direction of the worm’s rotation, the motion can be transmitted in the opposite direction through the worm wheel. This feature contributes to the adaptability of mechanical systems, allowing for bidirectional operation and versatility in various applications where reversible motion is required.
- Compact Design: Worm wheels offer a compact and space-efficient design due to their high gear ratio capabilities. The worm’s helical shape allows for a large reduction in speed within a relatively small package size. This compact design is advantageous in applications where space is limited or where a high gear reduction is required without occupying excessive space. The compactness of worm wheels enhances the adaptability of mechanical systems in diverse settings, including compact machinery, automotive applications, or tight spaces.
- High Torque Transmission: Worm wheels are known for their ability to transmit high torque. The sliding action between the worm and the worm wheel creates a large contact area, enabling efficient torque transfer. This high torque transmission capability makes worm wheels suitable for applications requiring high torque output, such as lifting mechanisms, conveyor systems, or heavy-duty machinery. The ability to handle high torque contributes to the versatility and adaptability of mechanical systems in different settings.
- Mechanical Advantage: Worm wheels provide a mechanical advantage by converting a small rotational input force into a larger rotational output force. This mechanical advantage is a result of the gear ratio between the worm and the worm wheel. It allows mechanical systems to generate higher output forces or torques than what is applied at the input. This feature is valuable in applications where increased force or torque amplification is required, enabling systems to adapt to varying load demands and perform tasks that would otherwise be challenging or impractical.
- Noise Reduction: Worm wheels are known for their quiet operation due to the sliding contact between the worm and the worm wheel teeth. This sliding action reduces the impact and noise associated with gear meshing compared to other types of gears, such as spur gears or bevel gears. The noise reduction capability of worm wheels makes them suitable for applications where noise control is important, such as in precision equipment, office machinery, or noise-sensitive environments. This contributes to the adaptability of mechanical systems in different settings that require low noise levels.
Overall, worm wheels contribute significantly to the adaptability and versatility of mechanical systems in diverse settings. Their variable speed ratios, directional reversibility, compact design, high torque transmission, mechanical advantage, and noise reduction capabilities enable them to meet specific requirements and perform a wide range of tasks in different applications.
What maintenance practices are recommended for worm wheels to ensure optimal functionality?
Maintaining worm wheels is crucial for ensuring their optimal functionality and longevity. Here are some recommended maintenance practices for worm wheels:
- Regular Inspection: Perform regular visual inspections of the worm wheels to check for any signs of wear, damage, or abnormal operating conditions. Look for indications such as pitting, chipping, excessive tooth wear, or misalignment. Early detection of issues allows for timely intervention and prevents further damage.
- Cleaning: Keep the worm wheels clean from dirt, dust, and debris that may accumulate on the gear surfaces. Use a soft brush or compressed air to remove any contaminants that could potentially affect the gear’s performance or lead to premature wear. Avoid using harsh cleaning agents that may damage the gear material or lubrication.
- Lubrication: Ensure proper lubrication of the worm wheels according to the manufacturer’s recommendations. Lubrication reduces friction, minimizes wear, and helps dissipate heat. Follow the specified lubrication intervals and use the appropriate lubricant type and viscosity for the specific application. Monitor the lubricant level regularly and replenish or replace it as needed.
- Alignment and Adjustments: Check the alignment of the worm wheel with the worm gear to ensure proper meshing and load distribution. Misalignment can result in increased wear, reduced efficiency, and potential damage. If misalignment is detected, consult the manufacturer’s guidelines for proper alignment procedures and make necessary adjustments.
- Torque Monitoring: Periodically monitor the torque levels in the system to ensure they are within the recommended range. Excessive torque can lead to increased wear and potential gear failure. Use appropriate torque monitoring devices or methods to measure and verify that the torque values are within the specified limits.
- Temperature Monitoring: Keep an eye on the operating temperature of the worm wheels. Excessive heat can indicate issues such as inadequate lubrication, overloading, or misalignment. Monitor the temperature using appropriate temperature measurement devices and take corrective actions if abnormal temperatures are observed.
- Replacement of Worn Parts: If any components of the worm wheel assembly, such as the gear or bearings, show significant wear or damage that cannot be rectified through maintenance, consider replacing those worn parts. Using worn components can compromise the performance and reliability of the worm wheel system.
- Training and Documentation: Ensure that maintenance personnel are properly trained on the specific maintenance requirements and procedures for worm wheels. Maintain accurate documentation of maintenance activities, including inspection records, lubrication schedules, and any repairs or replacements performed. This documentation helps track the maintenance history and assists in identifying any recurring issues or trends.
By following these maintenance practices, worm wheels can be kept in optimal condition, ensuring their functionality, reliability, and longevity. Regular inspections, proper cleaning, lubrication, alignment, torque and temperature monitoring, timely replacement of worn parts, and well-documented maintenance activities are essential for the effective maintenance of worm wheels.
Can you provide examples of products or machinery that use worm wheels in their systems?
Yes, there are numerous products and machinery that utilize worm wheels as integral components in their systems. Here are some examples:
- Elevators: Worm wheels are commonly used in elevator systems to control the vertical movement of the elevator car. The high gear reduction ratio of the worm wheel allows for precise and controlled lifting and lowering of the elevator. The self-locking property of the worm wheel ensures that the elevator remains stationary at each floor, enhancing safety and stability.
- Conveyors: Conveyors, such as belt conveyors or screw conveyors, often incorporate worm wheels to drive the movement of the conveyor belt or screw. The gear reduction provided by the worm wheel allows for controlled and synchronized material handling in industries such as manufacturing, mining, and logistics.
- Automotive Applications: Worm wheels are utilized in various automotive applications. For example, power steering systems use worm wheels to convert the rotational motion of the steering wheel into the linear motion required for steering the vehicle. Additionally, some automotive seat adjustment mechanisms and convertible roof systems use worm wheels for precise positioning and control.
- Machine Tools: Worm wheels are found in machine tools like milling machines, lathes, and grinders. They are often used in the feed mechanisms to control the movement of the workpiece or cutting tool with high precision and accuracy. The high gear reduction ratio of the worm wheel enables fine adjustments of the feed rate and ensures stable and controlled machining operations.
- Robotics: Worm wheels are employed in various robotic systems for precise motion control. They can be found in robotic arms, grippers, and joints, allowing for accurate positioning and movement. The self-locking property of the worm wheel ensures that the robot maintains its position when not actively driven, providing stability and safety in robotic applications.
- Positioning Systems: Precision positioning systems, such as linear stages or rotary stages, utilize worm wheels to achieve accurate and repeatable motion. These systems are commonly used in semiconductor manufacturing, optics, microscopy, and other industries where precise positioning is critical. Worm wheels provide the necessary gear reduction and precise control required for precise positioning applications.
- Gate Operators: Worm wheels are employed in gate operator systems to control the opening and closing of gates, such as in residential or commercial gate automation. The gear reduction provided by the worm wheel allows for controlled and smooth operation of the gate, ensuring security and convenience.
- Industrial Mixers: Worm wheels are used in industrial mixers and agitators to control the rotational speed and torque applied to the mixing blades. The gear reduction ratio of the worm wheel enables precise control of the mixing process, ensuring efficient and consistent mixing of various substances in industries like chemical processing and food production.
These examples illustrate the wide range of applications where worm wheels are utilized to provide precise motion control, torque management, and reliable performance. Their versatility and ability to control speed, torque, and direction make them valuable components in various products and machinery.
editor by Dream 2024-05-03
China best High Precision Worm Bevel Helical Oval Rack Nylon Set Mod 2 Small 3D Printed Toy Injection One Shaft DC Shaft Motor Cog Plastic Gear Manufacturer
Product Description
OEM CNC Machinery Wholesale Double Spur Gear Part Fabrication Plastic Gears for Toys
Product Description
1. Precision CNC machining parts strictly follow customer’s drawing,packing and quality requirement.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers;
Detailed Photos
Product Parameters
Our advantage of cnc machining:
| Business Type | Beyond the Manufacturer and strong organized ability in the industrial |
| Benefits | 1. Deeper industrial experience at CNC machining parts service for more than 10-years,our customer’s requirement is our 1st priority. 2. 2D or 3D files is available; 3. We trust the quality priority and we insist the good quality should be based on the customers’ satisfied; 4. Without any MOQ requirement; 5.Faster delivery time; 6. Customized size and specification /OEM available 7. Near ZheJiang Port |
The material
| Material System | Material Composition | Typical Applications |
| Low Alloy Steel | Fe-2Ni , Fe-8Ni | Automobile,machinery and other industries,particularly in structural parts |
| Stainless Steel | 316L,17-4PH,420,440C | Medical equipments, clocks,watches |
| Carbide | WC-Co | Various tools,clocks,watches |
| Ceramic | Al2O3 ,ZrO2 ,SiO2 | IT electronics, daily necessities,watches |
| Heavy Alloys | W-Ni-Fe,W-Ni-Cu,W-Cu | The arms industry, communications,daily necessities |
| Titanium | Ti,Ti-6Al-4V | Medical and firearm structural parts |
| Magnetic Materials | Fe,NdFeB,SmCo5,Fe-Si | Magnetic properties of the various components |
| Tool Steel | CrMo4,M2 | Tools |
| Table 2 Typical properties of several MIM materials: | |||||
| Materials | Density | Hardness | Tensile Strength | Elongation | |
| g/cm³ | Rockwell | Mpa | % | ||
| Fe-based alloys | MIM-2200(Sintered) | 7.65 | 45HRB | 290 | 40 |
| MIM-2700(Sintered) | 7.65 | 69HRB | 440 | 26 | |
| MIM-4605(Sintered) | 7.62 | 62HRB | 415 | 15 | |
| MIM-4605(Quenching and tempering) | 7.62 | 48HRC | 1655 | 2 | |
| Stainless steel | MIM-316L(Sintered) | 7.92 | 67HB | 520 | 50 |
| MIM-17-4PH(Sintered) | 7.5 | 27HRC | 900 | 6 | |
| MIM-17-4PH(Sintered) | 7.5 | 40HRC | 1185 | 6 | |
| MIM-430L(Sintered) | 7.5 | 65HRB | 415 | 25 | |
| Tungsten alloys | 95%W-Ni-Fe | 18.1 | 30 | 960 | 25 |
| 97%W-Ni-Fe | 18.5 | 33 | 940 | 15 | |
| Carbide | YG8X | 14.9 | HRA90 | Bending Strength 2300 | |
| Fine Ceramics | Al2O3 | 3.98 | HRA92 | Bending Strength 2300 | |
Packaging & Shipping
- We prefer DHL or TNT express or other air freight between 1kg-100kg.
- we prefer sea freight more than 100kg or more than 1CBM
- As per customized specifications.
Company Profile
About us
HangZhou CHINAMFG Technology Co.,Ltd is located in HangZhou City, ZheJiang Province, Which closed the ZheJiang .The Emitech Technology is mainly engaged in the CNC Machinery Industrial Service for 15 years. Our Parts are sold to Europe, America, Japan, South Korea and China in various kinds of industrial.At present, Our company has CNC Turning machines and CNC centers and equip with professional quality and testing instruments.We have full OEM Experience from worldwide, providing them with One-stop solutions for a broad range of applications.We look CHINAMFG to cooperating with you!
Our Advantages
1. Precision CNC machining parts strictly follow customer’s drawing,packing and quality requirement.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers;
After Sales Service
Custom CNC machining Services brass aluminium stainless steel cnc parts
We usually provide 12 Months repair service. If our duty, we will respond to send the new parts.
Our Service
| Our Processing | CNC center, CNC milling, CNC turning, drilling, grinding, bending, stamping, tapping, |
| Surface finish | Polishing, sandblasting,Zinc-plated, nickel-plated, chrome-plated, silver-plated, gold-plated, imitation gold-plated, |
| Tolerance | 0.05mm~0.1mm |
| QC System | 100% inspection before shipment |
| Drawing format | CAD / PDF/ DWG/ IGS/ STEP |
| Packaging | Plastic bag/Standard package / Carton or Pallet / As per customized specifications |
| Payment Terms | 30 -50%T/T in advance, 70-50% balance before delivery; Pay Pal or Western Union is acceptable. |
| Trade terms | EXW, FOB, CIF, As per the customer’s request |
| Shipment Terms |
1)We prefer DHL or TNT express or other air freight between 1kg-100kg. 2) we prefer sea freight more than 100kg or more than 1CBM |
| Note | The CNC machining parts are usually custom-made based on the customer’s drawings and samples. So we need the Down Payment |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Repaire |
|---|---|
| Warranty: | Half a Year |
| Condition: | New |
| Certification: | CE, RoHS, GS, ISO9001 |
| Standard: | DIN, ASTM, GOST, GB, JIS, ANSI, BS |
| Customized: | Customized |
| Customization: |
Available
|
|
|---|
What maintenance practices are recommended for worm wheels to ensure optimal functionality?
Maintaining worm wheels is crucial for ensuring their optimal functionality and longevity. Here are some recommended maintenance practices for worm wheels:
- Regular Inspection: Perform regular visual inspections of the worm wheels to check for any signs of wear, damage, or abnormal operating conditions. Look for indications such as pitting, chipping, excessive tooth wear, or misalignment. Early detection of issues allows for timely intervention and prevents further damage.
- Cleaning: Keep the worm wheels clean from dirt, dust, and debris that may accumulate on the gear surfaces. Use a soft brush or compressed air to remove any contaminants that could potentially affect the gear’s performance or lead to premature wear. Avoid using harsh cleaning agents that may damage the gear material or lubrication.
- Lubrication: Ensure proper lubrication of the worm wheels according to the manufacturer’s recommendations. Lubrication reduces friction, minimizes wear, and helps dissipate heat. Follow the specified lubrication intervals and use the appropriate lubricant type and viscosity for the specific application. Monitor the lubricant level regularly and replenish or replace it as needed.
- Alignment and Adjustments: Check the alignment of the worm wheel with the worm gear to ensure proper meshing and load distribution. Misalignment can result in increased wear, reduced efficiency, and potential damage. If misalignment is detected, consult the manufacturer’s guidelines for proper alignment procedures and make necessary adjustments.
- Torque Monitoring: Periodically monitor the torque levels in the system to ensure they are within the recommended range. Excessive torque can lead to increased wear and potential gear failure. Use appropriate torque monitoring devices or methods to measure and verify that the torque values are within the specified limits.
- Temperature Monitoring: Keep an eye on the operating temperature of the worm wheels. Excessive heat can indicate issues such as inadequate lubrication, overloading, or misalignment. Monitor the temperature using appropriate temperature measurement devices and take corrective actions if abnormal temperatures are observed.
- Replacement of Worn Parts: If any components of the worm wheel assembly, such as the gear or bearings, show significant wear or damage that cannot be rectified through maintenance, consider replacing those worn parts. Using worn components can compromise the performance and reliability of the worm wheel system.
- Training and Documentation: Ensure that maintenance personnel are properly trained on the specific maintenance requirements and procedures for worm wheels. Maintain accurate documentation of maintenance activities, including inspection records, lubrication schedules, and any repairs or replacements performed. This documentation helps track the maintenance history and assists in identifying any recurring issues or trends.
By following these maintenance practices, worm wheels can be kept in optimal condition, ensuring their functionality, reliability, and longevity. Regular inspections, proper cleaning, lubrication, alignment, torque and temperature monitoring, timely replacement of worn parts, and well-documented maintenance activities are essential for the effective maintenance of worm wheels.
Can you explain the impact of worm wheels on the overall efficiency of gearing systems?
Worm wheels have a significant impact on the overall efficiency of gearing systems. Here’s a detailed explanation of their influence:
- Gear Reduction: Worm wheels are known for their high gear reduction ratios, which means they can achieve significant speed reduction in a single stage. This is due to the large number of teeth on the worm wheel compared to the number of starts on the worm. The gear reduction capability of worm wheels allows for the transmission of high torque at low speeds. However, it’s important to note that the high gear reduction also leads to a trade-off in terms of efficiency.
- Inherent Efficiency Loss: Worm gears inherently introduce some efficiency loss due to the sliding action that occurs between the worm and the worm wheel. This sliding action generates friction, which results in energy losses and heat generation. Compared to other types of gears, such as spur gears or helical gears, worm gears typically have lower efficiency levels.
- Self-Locking Property: One unique characteristic of worm wheels is their self-locking property. When the worm wheel is not being actively driven, the friction generated between the worm and the worm wheel prevents the worm wheel from rotating backward. This self-locking feature provides stability and prevents the system from backdriving. However, it also contributes to the overall efficiency loss of the gearing system.
- Lubrication and Friction: Proper lubrication of worm wheels is crucial for reducing friction and improving their efficiency. Lubrication forms a thin film between the worm and the worm wheel, reducing direct metal-to-metal contact and minimizing frictional losses. Insufficient or improper lubrication can lead to increased friction, higher energy losses, and reduced efficiency. Therefore, maintaining appropriate lubrication levels is essential for optimizing the efficiency of worm gear systems.
- Design Factors: Several design factors can impact the efficiency of worm wheels. These include the tooth profile, helix angle, material selection, and manufacturing tolerances. The tooth profile and helix angle can influence the contact pattern and the distribution of loads, affecting efficiency. The choice of materials with low friction coefficients and good wear resistance can help improve efficiency. Additionally, maintaining tight manufacturing tolerances ensures proper meshing and reduces energy losses due to misalignment or backlash.
- Operating Conditions: The operating conditions, such as the applied load, speed, and temperature, can also affect the efficiency of worm wheels. Higher loads and speeds can lead to increased friction and energy losses, reducing efficiency. Elevated temperatures can cause lubricant degradation, increased viscosity, and higher friction, further impacting efficiency. Therefore, operating within the specified load and speed limits and maintaining suitable operating temperatures are essential for optimizing efficiency.
In summary, worm wheels have a notable impact on the overall efficiency of gearing systems. While they offer high gear reduction ratios and self-locking capabilities, they also introduce inherent efficiency losses due to friction and sliding action. Proper lubrication, suitable design considerations, and operating within specified limits are essential for maximizing the efficiency of worm gear systems.
What are the signs that indicate a need for worm wheel replacement or maintenance, and how can they be diagnosed?
Proper diagnosis of worm wheel condition is crucial for determining whether replacement or maintenance is necessary. Here’s a detailed explanation of the signs indicating a need for worm wheel replacement or maintenance and how they can be diagnosed:
- Excessive Wear: Excessive wear on the worm wheel can be identified by visual inspection or measurement. Signs of wear include pitting, scoring, or surface roughness on the teeth. A worn worm wheel may exhibit a change in tooth profile or a reduction in tooth thickness. Regular inspections and measurements of the gear teeth can help diagnose excessive wear and determine if replacement or maintenance is required.
- Abnormal Noise or Vibration: Unusual noise or vibration during operation can indicate issues with the worm wheel. Excessive wear, misalignment, or damage to the gear teeth can cause irregular gear meshing, resulting in noise or vibration. Monitoring and analyzing noise and vibration levels using sensors and diagnostic tools can help diagnose the source of the problem and determine if maintenance or replacement of the worm wheel is necessary.
- Increased Backlash: Backlash refers to the clearance between the teeth of the worm and the worm wheel. An increase in backlash can indicate wear, tooth damage, or misalignment of the worm wheel. Excessive backlash can result in reduced efficiency, decreased positional accuracy, and increased noise. Backlash can be diagnosed by measuring the rotational play or movement between the worm and the worm wheel. If the backlash exceeds acceptable limits, it may indicate the need for maintenance or replacement.
- Reduced Efficiency or Performance: A decrease in the overall efficiency or performance of the mechanical system may suggest issues with the worm wheel. Reduced efficiency can be caused by various factors, including wear, misalignment, or damage to the gear teeth. Monitoring key performance indicators such as power consumption, speed, or torque can help identify any significant changes that may point to problems with the worm wheel. If the efficiency or performance drops below acceptable levels, maintenance or replacement may be necessary.
- Leakage or Contamination: Leakage of lubricant or the presence of contamination around the worm wheel can indicate seal failure or damage to the gear housing. Inspecting the gear housing for signs of oil leakage, debris, or foreign particles can help diagnose potential issues. If the worm wheel is not adequately lubricated or if contaminants are present, it can lead to accelerated wear, increased friction, and reduced gear life. Addressing the root cause of the leakage or contamination is essential, and it may involve maintenance or replacement of the worm wheel components.
- Irregular Motion or Positioning: If the mechanical system exhibits irregular motion, inconsistent positioning, or unintended movements, it may indicate problems with the worm wheel. Misalignment, wear, or damage to the gear teeth can cause irregular gear meshing, resulting in unpredictable motion or positioning errors. Monitoring and analyzing the system’s motion or positional accuracy can help diagnose any abnormalities that may require maintenance or replacement of the worm wheel.
It’s important to note that proper diagnosis of worm wheel condition often requires a combination of visual inspection, measurement, analysis of sensor data, and expertise in gear systems. Regular inspections, preventive maintenance, and monitoring of key performance indicators can help detect early signs of issues and determine the appropriate course of action, whether it involves maintenance or replacement of the worm wheel.
editor by CX 2024-04-11
China supplier 12V DC Electric Motor Gearbox Electric Motor 63mm Worm Gear Brushed DC
Product Description
Product Description
Product Description:
Introducing the High Power 63mm DC Worm Gear Motor
Upgrade to the High Power version of the 63mm DC worm gear motor from HangZhou Xihu (West Lake) Dis. Motor Co., Ltd. This motor is designed for optimal performance with a 50A stall current, making it ideal for high-power applications.
Key Features:
- Available with a 48CPR encoder for precise control
- Option to include a back shaft for added versatility
- Choose between a metal brush or carbon brush for customized performance
Whether you need reliable power and precision, this 63mm DC worm gear motor is the perfect choice for your project. Upgrade to the High Power version today!
63mm,76mm turboworm gear box motor, low noise and small load torque selection of plastic gear of POM material, there is no requirement for noise, but the choice of metal gear with large load torque,
The motor is used in rolling gates, automatic fence doors, glass doors, wipers, wheelchairs, various lifting equipment, kitchen supplies and other products.
The encoder can be used as a low cost servo motor and has the same function.
Equipped with left and right gearboxes can be used symmetrically, using rolling shafts and oil-bearing to meet various scenarios.
Various parameters can be adjusted according to customer requirements, the maximum torque of 12V/24V is 50N.m, for the speed of 10RPM
| voltage VDC |
no load speed RPM |
no load current A |
load torque KG.CM |
on load speed RPM |
power W |
ratio |
| 12 | 80 | 1.8 | 60 | 68 | 80 | 60:1 |
| 12 | 130 | 1.2 | 33 | 110 | 30 | 20:1 |
| 12 | 150 | 1.2 | 45 | 130 | 30 | 20:1 |
| 12 | 170 | 1.4 | 35 | 150 | 45 | 24:1 |
| 24 | 30 | 1.4 | 60 | 25 | 30 | 60:1 |
| 24 | 65 | 120 | 50 | 60 | 80 | 20:1 |
| 24 | 210 | 1.0 | 40 | 180 | 45 | 75:1 |
Detailed Photos
Product Parameters
Certifications
Packaging & Shipping
Installation Instructions
Company Profile
FAQ
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | DC Worm Gear Motor |
|---|---|
| Operating Speed: | Low Speed |
| Excitation Mode: | Excited |
| Function: | Driving |
| Casing Protection: | Open Type |
| Number of Poles: | 2 |
| Customization: |
Available
|
|
|---|
What factors should be considered when selecting worm wheels for different applications?
When selecting worm wheels for different applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the factors that should be taken into account:
- Torque Requirement: The torque requirement of the application is a crucial factor in selecting the appropriate worm wheel. Consider the maximum torque that the worm wheel needs to transmit and ensure that the selected worm wheel has a sufficient torque rating to handle the load without excessive wear or failure.
- Speed Range: The speed range of the application influences the choice of worm wheel. Different worm wheel configurations are suitable for specific speed ranges. For high-speed applications, it may be necessary to consider factors such as tooth design, materials, and lubrication to minimize friction and wear under increased rotational speeds.
- Load Capacity: Evaluate the expected load on the worm wheel and ensure that the selected worm wheel can handle the specific load without deformation or excessive wear. Factors such as tooth profile, material selection, and the number of threads in the worm wheel contribute to its load-carrying capacity.
- Space Constraints: Consider the available space for the installation of the worm wheel. Worm wheels come in various sizes, and it’s essential to choose a size that fits within the designated space without compromising performance or interfering with other components of the system.
- Operating Conditions: Evaluate the operating conditions such as temperature, humidity, and contamination levels. Some applications may require worm wheels with specific material properties to withstand harsh environments or corrosive substances. Consider factors such as corrosion resistance, temperature tolerance, and the need for additional sealing or protection measures.
- Efficiency Requirements: The desired efficiency of the system is an important consideration. Different worm wheel configurations and materials have varying levels of efficiency. Evaluate the trade-off between efficiency, cost, and other application requirements to select a worm wheel that provides the desired balance of performance and cost-effectiveness.
- Maintenance and Lubrication: Consider the maintenance requirements and lubrication needs of the worm wheel. Some worm wheels may require periodic lubrication to ensure smooth operation and minimize wear. Evaluate the accessibility of the worm wheel for lubrication and the frequency of maintenance that the application can accommodate.
- Compatibility: Ensure that the selected worm wheel is compatible with other components of the system, such as the mating worm gear and any associated power transmission elements. Consider factors such as tooth profiles, pitch, backlash control, and the overall system design to ensure proper meshing, alignment, and efficient power transmission.
- Cost Considerations: Finally, consider the cost implications of the selected worm wheel. Evaluate factors such as material costs, manufacturing complexity, and any additional features or customization required. Balance the desired performance and quality with the available budget to select a worm wheel that meets both technical and financial requirements.
By carefully considering these factors, it is possible to select the most suitable worm wheel for a specific application, ensuring optimal performance, longevity, and efficient power transmission.
What is a worm wheel, and how does it function in mechanical systems?
A worm wheel, also known as a worm gear or worm gear wheel, is an important component in mechanical systems that helps transmit motion and power between two perpendicular shafts. It consists of a circular gear called the worm wheel or worm gear, and a screw-like gear called the worm or worm screw. Here’s a detailed explanation of what a worm wheel is and how it functions in mechanical systems:
A worm wheel is a gear with teeth that are cut in a helical pattern around its circumference. It meshes with the worm, which has a threaded shaft resembling a screw. The worm gear and the worm are designed in such a way that their threads have a specific shape and orientation to ensure smooth and efficient power transmission.
The primary function of a worm wheel in mechanical systems is to provide a compact and efficient means of transmitting rotational motion and power between shafts that are oriented at right angles to each other. The interaction between the worm gear and the worm allows for high gear reduction ratios, making it suitable for applications that require large speed reductions and high torque output.
When the worm rotates, its threaded shaft engages with the teeth of the worm wheel, causing the wheel to rotate. The helical shape of the worm gear teeth allows for a sliding action between the worm and the worm wheel, resulting in a smooth and continuous transfer of motion. The gear ratio between the worm and worm wheel determines the speed reduction and torque multiplication achieved.
The unique design of the worm wheel provides several advantages in mechanical systems:
- High Gear Reduction: The helical threads of the worm wheel enable a significant reduction in rotational speed while increasing torque output. This makes it suitable for applications where a large reduction in speed is required, such as in machinery with heavy loads or precise positioning requirements.
- Self-Locking: The frictional force between the worm gear and the worm prevents backdriving, which means the worm wheel can hold its position even when the driving force is removed. This self-locking feature is beneficial for applications where it is necessary to prevent the transmission of motion from the output side back to the input side.
- Compact Design: The perpendicular arrangement of the worm and worm wheel allows for a compact and space-saving design. This is advantageous in applications where space constraints are a concern, such as in automotive, robotics, or machinery with limited available space.
- Quiet Operation: The sliding action between the worm and the worm wheel helps distribute the load over multiple teeth, reducing noise and vibration. This makes worm wheel mechanisms suitable for applications that require smooth and quiet operation, such as in precision equipment or gearboxes.
- Efficiency: Worm wheel systems can achieve high efficiency when properly designed and lubricated. However, they typically have lower efficiency compared to other types of gear systems due to the sliding motion and increased friction between the components.
Worm wheels are commonly used in various mechanical systems, including automotive transmissions, industrial machinery, elevators, printing presses, and steering systems. Their unique characteristics make them well-suited for applications that require precise control, high torque, and compact design.
It is important to note that proper lubrication, maintenance, and design considerations are crucial for ensuring the reliable and efficient operation of worm wheel systems. Regular inspections and adherence to manufacturer guidelines are essential for maximizing the lifespan and performance of worm wheel components.
Are there innovations or advancements in worm wheel technology that have emerged in recent years?
Yes, there have been significant innovations and advancements in worm wheel technology in recent years. Here’s a detailed explanation of some notable developments:
- Improved Materials: The development of new materials and advanced manufacturing techniques has contributed to improved performance and durability of worm wheels. High-performance materials such as hardened steels, alloys, and composite materials are being used to enhance the strength, wear resistance, and load-carrying capacity of worm wheels. These materials offer better fatigue resistance, reduced friction, and increased efficiency, leading to longer service life and improved overall performance.
- Enhanced Tooth Profile Design: Innovations in tooth profile design have focused on optimizing the contact pattern, load distribution, and efficiency of worm wheels. Advanced computer-aided design (CAD) and simulation tools enable the modeling and analysis of complex tooth profiles, resulting in improved gear meshing and reduced losses. Modified tooth profiles, such as helical or curved teeth, are being employed to minimize sliding friction, increase tooth engagement, and enhance overall efficiency.
- Surface Treatments and Coatings: Surface treatments and coatings are being used to improve the wear resistance, reduce friction, and enhance the performance of worm wheels. Technologies such as nitriding, carburizing, and diamond-like carbon (DLC) coatings are applied to the gear surfaces to increase hardness, reduce friction, and minimize wear. These treatments and coatings improve the efficiency and extend the lifespan of worm wheels, particularly in demanding applications with high loads or harsh operating conditions.
- Advanced Manufacturing Techniques: Innovations in manufacturing techniques have enabled the production of worm wheels with higher precision, tighter tolerances, and improved surface finishes. Technologies such as computer numerical control (CNC) machining, 3D printing, and advanced grinding methods allow for the production of complex geometries and accurate tooth profiles. These advancements result in better gear meshing, reduced noise, improved efficiency, and enhanced overall performance of worm wheel systems.
- Integrated Lubrication Systems: Integrated lubrication systems have been developed to optimize the lubrication process and improve the efficiency of worm wheels. These systems use precise oil delivery mechanisms, such as micro-pumps or spray nozzles, to deliver lubricant directly to the meshing surfaces. The controlled and targeted lubrication ensures proper lubricant film formation, reduces frictional losses, and minimizes wear. Integrated lubrication systems also help to maintain consistent lubricant quality and reduce the need for manual lubrication maintenance.
- Smart Monitoring and Predictive Maintenance: Advancements in sensor technology, data analytics, and connectivity have facilitated the implementation of smart monitoring and predictive maintenance strategies for worm wheel systems. Sensors embedded in the gear assembly can collect real-time data on parameters such as temperature, vibration, or load. This data is then analyzed using machine learning algorithms to detect anomalies, predict potential failures, and optimize maintenance schedules. Smart monitoring and predictive maintenance help to maximize uptime, reduce downtime, and improve the overall reliability and efficiency of worm wheel systems.
These recent innovations and advancements in worm wheel technology have resulted in improved performance, efficiency, durability, and reliability of worm wheel systems. Continued research and development in this field are expected to drive further advancements and expand the capabilities of worm wheel technology in various applications.
editor by CX 2024-04-03
China 12V 24V 200W 350W Reducer Dc Motor Large Diameter Self-Lock Dc Worm Gear Motor double reduction worm gearbox
Warranty: 3months-1year
Model Amount: KS-90WRV040 (200W-350W)
Usage: BOAT, Car, Electric Bicycle, Enthusiast, Home Equipment, Business
Type: Gear MOTOR
Torque: 4~50N.M
Construction: Everlasting Magnet
Commutation: Brush
Shield Characteristic: Absolutely Enclosed
Speed(RPM): 30~300RPM
Constant Existing(A): 14A~30A
Efficiency: Ie three
Solution Title: Massive Diameter Self-Lock Dc Worm Equipment Motor
Voltage: 12V 24V 36V 48V
Fat: 6 kg
Power: 200W 350W
Equipment Substance: Brass Equipment
Brush Variety: Carbon Brushed
Shaft Diameter: Hollow Diameter 18mm
Certification: ce, RoHS, ISO9001
Packaging Information: 12v 24v dc worm geared motor1. 4PCS/Carton. 2. Grossweight: 30KG/Carton.
| merchandise | price |
| Brand Identify | KSTONEMOTOR |
| Design Quantity | KS-90WRV040 (200W~350W) |
| Certifications | CE, ROHS, ISO9001 |
| Steady Current(A) | 14~thirty A |
| Efficiency | IE three |
| Torque | forty~500 kg.cm |
| Voltage | 12V 24V 36V 48V |
| Rated Speed | 30~300rpm |
| Electricity | 200~350 W |
Worm reducer gearbox
Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.
Mechanics
A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.
Sizes
Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
Applications
The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.
Cost
The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
Self-locking function
A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.
editor by Cx 2023-06-30
China 12V 24volt Small Micro BLDC Brushless DC Worm Geared Motor Metal Gear with Right Angle Gearbox brushless dc motor price double enveloping worm gearbox
Design Variety: ET-WGM58BL
Usage: BOAT, Car, Electrical Bicycle, Property Appliance, intelligent residence, electric powered curtain, health care gear, robotics
Kind: Equipment MOTOR
Torque: 1-80kgf.cm, 1-80kgf.cm, adjustable
Development: Long lasting Magnet
Commutation: Brushless
Protect Attribute: Entirely Enclosed
Speed(RPM): 1-1 55557288 For CHEVROLET CRUZE .65A or <1.50
Notice: The above specification is just for reference. The gear motor’s gear, shaft, speed, ratio, torque and motor variety can be personalized.
If you can not locate the proper motor or truly feel baffled, you should make contact with me. Our engineers will aid you and evaluate the suited motor for you.
Items Present<font size="4" color="# Tooth Travel Equipment Sprocket carton packing.
Delivery Details : ten-30 times following payment.
1. Special protecting packagingtwo. Outer Packing 1 three. Outer Packing two
Advantages and disadvantages of worm gear reducer gearbox
If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.
Hollow shaft worm gear reducer gearbox
Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.
Multi-head worm gear reducer gearbox
The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
Hypoid Gear Set
Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.
Hypoid gear motor
A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.
R series worm gear reducer gearbox
R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
AGKNX Electric Worm Gear reducer gearbox
AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
editor by Cx 2023-06-29
China 5840-31zy Double Shaft Motors Reversed And Self-lock 12V 24V DC Worm Gear Motor with Great quality
Guarantee: 3months-1year
Product Variety: 5840-31ZY Twin Spherical Shaft
Use: BOAT, Vehicle, Electrical Bicycle, Supporter, Property Appliance, Beauty instrument, Wise Home
Variety: Equipment MOTOR
Torque: max 100kg.cm
Construction: Long term Magnet
Commutation: Brush
Shield Attribute: Drip-proof
Velocity(RPM): twelve-470RPM
Continuous Current(A): 350mA
Effectiveness: Ie 3
Protecting function: Fully shut
Motor Diameter: 31mm
Motor Entire body Length: 88.8mm
Output Shaft Diameter: 8mm
Output Shaft Length: 2*33mm
Motor sort: 31ZY Steel Tube Motor
Gearbox dimension: fifty eight*forty
Packaging Particulars: 1. Shockproof foam packing2. Quality export carton
Port: HangZhou, Hongkong, HangZhou
Products Description
| Brand | Xinyongtai /Customer’s Model |
| Model | 5840-31ZY |
| Name | DC Geared Motor |
| Voltage | 12V / 24V |
| Power | 21W |
| No-load Pace | 5-470RPM |
| Electric Existing | 350mA |
| Product Shaft Duration | 14.5MM |
| Maximum Torque | 70KG.CM |
| Weight | 360g(APPROX) |
| Whether to alter the velocity | Yes |
| Whether CZPT or reverse | Yes |
| Model：XYT-5840-31ZY-1280 | ||||||||||||||||||
| Reduction ratio | No-Load | Rated Load | Stall | |||||||||||||||
| Rated Voltage (V) | Speed (RPM ± Manufacturing facility Cost of Japan CZPT Harvester Spare Parts ten%) | Current (A) | Speed (RPM ±10%) | Current (A) | Torque (Kg,cm) | Power(W) | Torque (Kg.cm) | Current (A) | ||||||||||
| 17 | 12 | 470 | 0.3 | 380 | 1.six | 2.7 | 19.2 | 13.5 | 6.5 | |||||||||
| 31 | 12 | 260 | 0.three | 200 | 1.six | 5 | 19.2 | 25 | 6.five | |||||||||
| 49 | 12 | 160 | 0.3 | 130 | 1.6 | 8 | 19.two | 40 | 6.5 | |||||||||
| 100 | 12 | 80 | 0.3 | 60 | 1.six | 16 | 19.two | 70 | 6.5 | |||||||||
| 200 | 12 | 40 | 0.3 | 30 | 1.six | 32 | 19.2 | 70 | 6.five | |||||||||
| 290 | 12 | 27 | 0.three | 20 | 1.six | 46 | 19.two | 70 | 6.5 | |||||||||
| 500 | 12 | 16 | 0.3 | 12 | 1.six | 70 | 19.2 | 70 | 6.five | |||||||||
| 670 | 12 | 12 | 0.three | 9 | 1.6 | 70 | 19.two | 70 | 6.5 | |||||||||
| 1000 | 12 | 8 | 0.3 | 6 | 1.6 | 100 | 19.2 | 400 | 6.five | |||||||||
| 1340 | 12 | 6 | 0.three | 4.5 | 1.6 | 100 | 19.2 | 400 | 6.5 | |||||||||
| Model：XYT-5840-31ZY-2480 | twelve | 21 | .135 | fifteen | .275 | 18 | seven | 69 | three.six | |||||||||
| 17 | 24 | 470 | 0.two | 380 | 1.two | 2.7 | 28.eight | 13.five | 4.4 | |||||||||
| 31 | 24 | 260 | 0.two | 200 | 1.2 | 5 | 28.8 | 25 | 4.4 | |||||||||
| 49 | 24 | 160 | 0.two | 130 | 1.two | 8 | 28.eight | 40 | 4.4 | |||||||||
| 100 | 24 | 80 | 0.two | 60 | 1.two | 16 | 28.eight | 70 | 4.4 | |||||||||
| 200 | 24 | 40 | 0.two | 30 | 1.2 | 32 | 28.eight | 70 | 4.4 | |||||||||
| 290 | 24 | 27 | 0.two | 20 | 1.two | 46 | 28.8 | 70 | 4.4 | |||||||||
| 500 | 24 | 16 | 0.2 | 12 | 1.two | 70 | 28.8 | 70 | 4.four | |||||||||
| 670 | 24 | 12 | 0.2 | 9 | 1.two | 70 | 28.8 | 70 | 4.4 | |||||||||
| 1000 | 24 | 8 | 0.2 | 6 | 1.two | 100 | 28.8 | 400 | 4.four | |||||||||
| 1340 | 24 | 6 | 0.two | 4.five | 1.two | 100 | 28.eight | 400 | 4.four | |||||||||
| The engineer recommends： Recommended that the load not exceed 100KG,CM | ||||||||||||||||||
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by Cx 2023-06-28
China 59mm Dc Motor Geared Ratio 170 Gear Motor Dc 24V for Electric Clothes Drying Rack worm gearbox exploded view
Warranty: 3months-1year
Design Amount: D59R-2430-40
Use: House Appliance, Smart Residence, Electric powered Laundry Drying Rack
Type: Equipment MOTOR
Torque: 16n.m
Construction: Everlasting Magnet
Commutation: Brush
Shield Function: Completely Enclosed
Velocity(RPM): 40RPM
Steady Recent(A): 1.2A
Efficiency: IE two
Motor Diameter: 59mm
Motor Variety: motor dc 24v
Voltage: DC12V 24V 36V 48V 72V
Electricity: 30W – 60W
Velocity: fifteen RPM – 180RPM
Content of gear: Plastic / copper Equipment
Motor gearbox: Remaining angle / rignt angle gearbox
Diameter of output shaft: 6mm 8mm 10mm 12mm 14mm(optional)
Velocity Sensor: Hall sensor,encoder,opto sensor
OEM / ODM Services: Settle for
Packaging Information: 10pcs/ctnmotor dc 24v
Port: HangZhou / HangZhou
59mm Dc Motor Geared Ratio 1:70 Gear Motor Dc 24V for Electrical Outfits Drying Rack Note:1.Please inform the software of your brushed dc equipment motors.2.Remember to give the load pace and load torque.3.Please pick the mounting length 50.80mm or 72mm. Note:The motor is exceptional for electrical clothing drying rack,WEWIN could provide diverse options in accordance to your requirements of various torques.Motor Dc 24V SpecificationElectric garments drying rack is functioning by way of motor by distant handle.The gear motor could assure the secure lifting pace of the electric powered drying rack and management its peak.The gear box could drive a pair of screw nuts to switch the rotary movement into linear motion and comprehensive the lifting by forward and reverse rotation of the motor. Product Overview
| Motor Dimension | 45mm 49mm 59mm 63mm 76mm 88mm 110mm |
| Motor Electrical power | DC 12V 24V 36V 48V 72V 110V |
| Motor sort | motor dc 24v |
| Material of Gear | Plastic gear / copper gear |
| Motor Gearbox | Appropriate Angle Gearbox Motor , Still left Anlge Equipment packing containers |
| Diameter of Output Shaft | 6mm 8mm 10mm 12mm 14mm(Optional) |
| Pace Sensor | Corridor Sensor,Dc Motor with Encoder,Opto sensor,Brake motor |
| Factory Tackle | Xihu (West Lake) Dis.,HangZhou |
| Our Dc Motors Edge | 1.Low sounds 4000hr(continually operating)3.Self Locking Motor, CZPT & Reverse4.Aggressive factory price5.Sample purchase are welcome |
| Products Variety | Voltage(V) | Power(W) | No Load | Load | Gear Ratio | Motor Duration (mm) | ||||||
| Speed(RPM) | Current(A) | Speed(RPM) | Current(A) | Torque(N.M) | ||||||||
| D59R/L-1230-15 | 12 | 30 | 15±2 | ≤1.two | 12±2 | ≤4.five | ≥4. | 1:70 | 80 | |||
| D59R/L-2430-15 | 24 | 30 | 15±2 | ≤1.two | 12±2 | ≤4.five | ≥4. | 1:70 | 80 | |||
| D59R/L-2450-36 | 24 | 50 | 36±2 | ≤1.2 | 32±2 | ≤6.5 | ≥8. | 1:70 | 80 | |||
| D59R/L-1230-65 | 12 | 30 | 65±3 | ≤1.two | 60±3 | ≤5.5 | ≥6. | 1:fifty six | 80 | |||
| D59R/L-2430-65 | 24 | 30 | 65±3 | ≤1.2 | 60±3 | ≤5.five | ≥6. | 1:fifty six | 80 | |||
| D59R/L-4830-65 | 48 | 30 | 65±3 | ≤1.2 | 60±3 | ≤5.5 | ≥ ATV Entrance Sprocket For CZPT CZPT 200 ER TRI-MOTO 6. | 1:56 | 80 | |||
| D59R/L-4230-130 | 42 | 30 | 130±5 | ≤1.five | 100±5 | ≤6.5 | ≥4. | 1:28 | 80 | |||
| D59R/L-2430-a hundred and fifty | 24 | 30 | 150±5 | ≤1. | 130±5 | ≤6.five | ≥4. | 1:28 | 80 | |||
| D59R/L-2430-one hundred eighty | 24 | 30 | 180±5 | ≤1.two | 150±5 | ≤6.five | ≥4. | 1:28 | 80 | |||
| D59R/L-2430-210 | 24 | 30 | 210±5 | ≤1.five | 180±2 | ≤6.five | ≥4.two | 1:28 | 80 | |||
Worm gear reducer gearbox
A worm gear reducer gearbox is a gear reducer gearbox that uses a worm gear train to reduce the required force. Unlike traditional gear reducer gearboxes, these units are small and require low horsepower ratings. This reduces their efficiency, but their low cost and compact design help make up for this shortcoming. However, these gear reducer gearboxes have some drawbacks, including their tendency to lock up when reversing.
high efficiency
High-efficiency worm reducer gearboxes are ideal for applications where high performance, repeatability, and accuracy are critical. It consists of an input hypoid gear and an output hypoid bevel gear. The input worm rotates perpendicular to the output worm, so for every revolution of the input worm, the output gear makes one revolution. This arrangement reduces friction (another source of energy loss) in a high-efficiency worm gear to at least two arc minutes.
Compared with worm gear reducer gearboxes, hypoid gearmotors offer several advantages, including lower operating costs and higher efficiency. For example, hypoid gear motors can transmit more torque even at high reduction ratios. Also, they are more efficient than worm gear reducer gearboxes, which means they can produce the same output with a smaller motor.
In recent years, the efficiency of worm gear reducer gearboxes has been dramatically improved. Manufacturers have made great strides in materials, design, and manufacturing. New designs, including dual-enveloping worm gear reducer gearboxes, increase efficiency by 3 to 8 percent. These improvements were made possible through countless hours of testing and development. Worm gear reducer gearboxes also offer lower initial costs and higher overload capability than competing systems.
Worm gear reducer gearboxes are popular because they provide maximum reduction in a small package. Their compact size makes them ideal for low to medium-horsepower applications and they are reticent. They also offer higher torque output and better shock load tolerance. Finally, they are an economical option to reduce the device’s power requirements.
low noise
Low-noise worm gear reducer gearboxes are designed to reduce noise in industrial applications. This type of reducer gearbox uses fewer bearings and can work in various mounting positions. Typically, a worm reducer gearbox is a single-stage unit with only one shaft and one gear. Since there is only one gear, the noise level of the worm gear reducer gearbox will be lower than other types.
A worm gear reducer gearbox can be integrated into the electric power steering system to reduce noise. Worm reducer gearboxes can be made and from many different materials. The following three-stage process will explain the components of a low-noise worm reducer gearbox.
Worm gear reducer gearboxes can be mounted at a 90-degree angle to the input worm shaft and are available with various types of hollow or solid output shafts. These reducer gearboxes are especially beneficial for applications where noise reduction is essential. They also have fewer parts and are smaller than other types of reducer gearboxes, making them easier to install.
Worm gear reducer gearboxes are available from various manufacturers. Due to their widespread availability, gear manufacturers maintain extensive inventories of these reducer gearboxes. The worm gear ratio is standard, and the size of the worm gear reducer gearbox is universal. Also, worm gear reducer gearboxes do not need to be sized for a specific purpose, unlike other load interruptions.
A worm gear reducer gearbox is a transmission mechanism with a compact structure, large transmission ratio, and self-locking function under certain conditions. The worm gear reducer gearbox series products are designed with American technology and have the characteristics of stable transmission, strong bearing capacity, low noise, and compact structure. In addition, these products can provide a wide range of power supplies. However, these worm reducer gearboxes are prone to leaks, usually caused by design flaws.
Worm gear reducer gearboxes are available in single-stage and double-stage. The first type consists of an oil tank that houses the worm gear and bearings. The second type uses a worm gear with a sleeve for the first worm gear.
When choosing a gear reducer gearbox, it is essential to choose a high-quality unit. Improper gear selection can cause rapid wear of the worm gear. While worm gear reducer gearboxes are generally durable, their degree of wear depends on the selection and operating conditions. For example, overuse, improper assembly, or working in extreme conditions can lead to rapid wear.
Worm reducer gearboxes reduce speed and torque. Worm gears can be used to reduce the speed of rotating machines or inertial systems. Worm gears are a type of bevel gear, and their meshing surfaces have great sliding force. Because of this, worm gears can carry more weight than spur gears. They are also harder to manufacture. However, the high-quality design of the worm gear makes it an excellent choice for applications requiring high torque and high-speed rotation.
Worm gears can be manufactured using three types of gears. For large reduction ratios, the input and output gears are irreversible. However, the worm reducer gearbox can be constructed with multiple helices. The multi-start worm drive also minimizes braking effects.
Self-locking function
The worm reducer gearbox is self-locking to prevent the load from being driven back to the ground. The self-locking function is achieved by a worm that meshes with the rack and pinion. When the load reaches the highest position, the reverse signal is disabled. The non-locking subsystem back-drives the load to its original position, while the self-locking subsystem remains in its uppermost position.
The self-locking function of the worm reducer gearbox is a valuable mechanical feature. It helps prevent backing and saves the cost of the braking system. Additionally, self-locking worm gears can be used to lift and hold loads.
The self-locking worm gear reducer gearbox prevents the drive shaft from driving backward. It works with the axial force of the worm gear. A worm reducer gearbox with a self-locking function is a very efficient machine tool.
Worm gear reducer gearboxes can be made with two or four teeth. Single-ended worms have a single-tooth design, while double-ended worms have two threads on the cylindrical gear. A multi-boot worm can have up to four boots. Worm reducer gearboxes can use a variety of gear ratios, but the main advantage is their compact design. It has a larger load capacity than a cross-shaft helical gear mechanism.
The self-locking function of the worm reducer gearbox can also be used for gear sets that are not necessarily parallel to the shaft. It also prevents backward travel and allows forward travel. The self-locking function is achieved by a ratchet cam arranged around the gear member. It also enables selective coupling and decoupling between gear members.
high gear ratio
Worm reducer gearboxes are an easy and inexpensive way to increase gear ratios. These units consist of two worm gears – an input worm gear and an output worm gear. The input worm rotates perpendicular to the output worm gear, which also rotates perpendicular to itself. For example, a 5:1 worm gearbox requires 5 revolutions per worm gear, while a 60:1 worm gearbox requires 60 revolutions. However, this arrangement is prone to inefficiency since the worm gear experiences only sliding friction, not rolling friction.
High-reduction applications require many input revolutions to rotate the output gear. Conversely, low input speed applications suffer from the same friction issues, albeit with a different amount of friction. Worms that spin at low speeds require more energy to maintain their movement. Worm reducer gearboxes can be used in many types of systems, but only some are suitable for high-speed applications.
Worm gears are challenging to produce, but the envelope design is the best choice for applications requiring high precision, high efficiency, and minimal backlash. Envelope design involves modifying gear teeth and worm threads to improve surface contact. However, this type of worm gear is more expensive to manufacture.
Worm gear motors have lower initial meshing ratios than hypoid gear motors, which allows the use of smaller motors. So a 1 hp worm motor can achieve the same output as a 1/2 hp motor. A study by Agknx compared two different types of geared motors, comparing their power, torque, and gear ratio. The results show that the 1/2 HP hypoid gear motor is more efficient than the worm gear motor despite the same output.
Another advantage of the worm gear reducer gearbox is the low initial cost and high efficiency. It offers high ratios and high torque in a small package, making it ideal for low to medium-horsepower applications. Worm gear reducer gearboxes are also more shock-resistant.
editor by Cx 2023-06-27
China 12V 24V 30KG 40KG.CM high torque dc gear motor for vending machine combined worm gearbox
2023-06-16
China 10nm torque dc motor Low Noise 58SW31ZY 58mm gearbox 12v 18v small worm gear dc electric motor for Wending Machine supplier
2023-06-16