Product Description
90 Degree CHINAMFG Output Gearbox S Series Worm Gear Units
Product Description
1. Product Characteristics:
S series helical worm gearbox adopts the helical worm gears to make its structure more reasonable. S series not only has higher transmission efficency and loading capability than those single-stage worm wheel transmission, but also smaller volume and appearance. Moreover, S series worm gearbox has higher transmission ratio, and can be combined with various gearboxes and speed variators to meet the different requirements.
2. Structure:
S series gearbox are available in the following designs:
(1) SY Foot mounted helical worm gearbox with CHINAMFG shaft
(2) SAY Helical worm gearbox with hollow shaft
(3) SAZY Small flange mounted helical worm gearbox with hollow shaft
(4) SA (S,SF,SAF,SAZ)Y Assemble users’ motor or special motor, flange is required
(5) SFY Flange mounted helical worm gearbox with CHINAMFG shaft
(6) SAFY Flange mounted helical worm gearbox with hollow shaft
(7) SATY Torque arm mounted helical worm gearbox with hollow shaft
(8) S (SF,SA,SAF,SAZ) S Shaft input helical worm gearbox
(9) SA (S,SF,SAF,SAZ)RY Combined helical worm gearbox
(10) SA (S,SF,SAF,SAZ)SR Shaft input combined helical worm gearbox
3. Detailed parameters:
Size |
38 | 48 | 58 | 68 | 78 | 88 | 98 |
Structure |
S SA SF SAF SAT SAZ | ||||||
Input Power(KW) | 0.18-0.75 | 0.18-1.5 | 0.18-3 | 0.25-5.5 | 0.55-7.5 | 0.75-15 | 1.5-22 |
Ratio | 10.27-152 | 11.46-244.74 | 10.78-196.21 | 11.55-227.20 | 9.96-241.09 | 11.83-222 | 12.75-230.48 |
Maximum torque(N.m) | 90 | 170 | 295 | 520 | 1270 | 2280 | 4000 |
4.Applications:
The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and other regions.
5. Technical Data:
Rated Power:0.18~22KW
Output Speed: 0.16~147r/min
Output Torque:90~4000N.m
Mounted Form:Foot-mounted, flange mounted, shaft-mounted, torque arm mounted
6.Product picture:
7.Our company :
8.Customer visiting:
9.Our Services:
Pre-sale services | 1. Select equipment model. |
2.Design and manufacture products according to clients’ special requirement. | |
3.Train technical personal for clients | |
Services during selling | 1.Pre-check and accept products ahead of delivery. |
2. Help clients to draft solving plans. | |
After-sale services | 1.Assist clients to prepare for the first construction scheme. |
2. Train the first-line operators. | |
3.Take initiative to eliminate the trouble rapidly. | |
4. Provide technical exchanging. |
10.FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
5.Q:How about your packing?
A:standard exporting packing container.
6.Q:Is possible to visit your factory?
A:Welcome to our factory.
If you are interested in our product, welcome you contact me.
Our team will support any need you might have. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Machinery, Industry |
---|---|
Hardness: | Hardened |
Installation: | Horizontal Type |
Layout: | Right Angle |
Gear Shape: | Helical Gear |
Step: | Double-Step |
Customization: |
Available
|
|
---|
What are the advantages of using a worm wheel in gearing systems?
Using a worm wheel in gearing systems offers several advantages, making it a popular choice for various applications. Here’s a detailed explanation of the advantages of using a worm wheel:
- High Gear Reduction: Worm wheels provide significant gear reduction ratios, allowing for large speed reductions and high torque output. The helical shape of the worm gear teeth and the interaction with the worm enable gear ratios ranging from 5:1 to 100:1 or even higher. This makes worm wheels suitable for applications that require high torque and low-speed operation.
- Compact Design: The perpendicular arrangement of the worm gear and the worm wheel allows for a compact design, making efficient use of space. This is especially beneficial in applications where space is limited or where a compact and lightweight design is desired.
- Self-Locking: One of the unique properties of a worm wheel system is its inherent self-locking ability. Due to the sliding action and the angle of the helical teeth, the worm wheel can hold its position and prevent backdriving. This means that even when the driving force is removed, the worm wheel remains locked in place, enhancing safety and stability in applications where position holding is critical.
- High Torque Capability: The sliding action and increased tooth engagement of the worm wheel design allow for a larger contact area between the worm gear and the worm wheel. This results in higher torque transmission capacity compared to other gear types, making worm wheels suitable for applications requiring high torque output.
- Quiet Operation: The sliding action between the worm gear and the worm wheel results in smoother and quieter operation compared to other gear types. The helical teeth of the worm wheel help distribute the load over multiple teeth, reducing noise and vibration, and providing a smoother transmission of power.
- Directional Control: Worm wheels offer excellent directional control, allowing power transmission in a single direction only. The self-locking nature of the worm wheel prevents any reverse motion from the output side to the input side. This property is advantageous in applications where precise motion control and prevention of backward movement are required.
- Efficient Power Transmission: The sliding action, larger contact area, and self-locking nature of the worm wheel design contribute to efficient power transmission. The reduced friction and wear, along with the optimized tooth engagement, help minimize energy losses, improve overall system efficiency, and reduce the need for frequent maintenance.
- Versatility: Worm wheels can be manufactured in various sizes, materials, and configurations to suit different application requirements. They can be customized to meet specific torque, speed, and space constraints, making them versatile for a wide range of applications across industries.
These advantages make worm wheels suitable for a variety of applications, including automotive, industrial machinery, elevators, robotics, and more. However, it’s important to consider factors such as lubrication, proper gear meshing, and maintenance to ensure the reliable and efficient operation of worm wheel systems.
What are the advantages of using a worm wheel in gearing systems?
Using a worm wheel in gearing systems offers several advantages, making it a popular choice for various applications. Here’s a detailed explanation of the advantages of using a worm wheel:
- High Gear Reduction: Worm wheels provide significant gear reduction ratios, allowing for large speed reductions and high torque output. The helical shape of the worm gear teeth and the interaction with the worm enable gear ratios ranging from 5:1 to 100:1 or even higher. This makes worm wheels suitable for applications that require high torque and low-speed operation.
- Compact Design: The perpendicular arrangement of the worm gear and the worm wheel allows for a compact design, making efficient use of space. This is especially beneficial in applications where space is limited or where a compact and lightweight design is desired.
- Self-Locking: One of the unique properties of a worm wheel system is its inherent self-locking ability. Due to the sliding action and the angle of the helical teeth, the worm wheel can hold its position and prevent backdriving. This means that even when the driving force is removed, the worm wheel remains locked in place, enhancing safety and stability in applications where position holding is critical.
- High Torque Capability: The sliding action and increased tooth engagement of the worm wheel design allow for a larger contact area between the worm gear and the worm wheel. This results in higher torque transmission capacity compared to other gear types, making worm wheels suitable for applications requiring high torque output.
- Quiet Operation: The sliding action between the worm gear and the worm wheel results in smoother and quieter operation compared to other gear types. The helical teeth of the worm wheel help distribute the load over multiple teeth, reducing noise and vibration, and providing a smoother transmission of power.
- Directional Control: Worm wheels offer excellent directional control, allowing power transmission in a single direction only. The self-locking nature of the worm wheel prevents any reverse motion from the output side to the input side. This property is advantageous in applications where precise motion control and prevention of backward movement are required.
- Efficient Power Transmission: The sliding action, larger contact area, and self-locking nature of the worm wheel design contribute to efficient power transmission. The reduced friction and wear, along with the optimized tooth engagement, help minimize energy losses, improve overall system efficiency, and reduce the need for frequent maintenance.
- Versatility: Worm wheels can be manufactured in various sizes, materials, and configurations to suit different application requirements. They can be customized to meet specific torque, speed, and space constraints, making them versatile for a wide range of applications across industries.
These advantages make worm wheels suitable for a variety of applications, including automotive, industrial machinery, elevators, robotics, and more. However, it’s important to consider factors such as lubrication, proper gear meshing, and maintenance to ensure the reliable and efficient operation of worm wheel systems.
What factors should be considered when selecting worm wheels for different applications?
When selecting worm wheels for different applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the factors that should be taken into account:
- Torque Requirement: The torque requirement of the application is a crucial factor in selecting the appropriate worm wheel. Consider the maximum torque that the worm wheel needs to transmit and ensure that the selected worm wheel has a sufficient torque rating to handle the load without excessive wear or failure.
- Speed Range: The speed range of the application influences the choice of worm wheel. Different worm wheel configurations are suitable for specific speed ranges. For high-speed applications, it may be necessary to consider factors such as tooth design, materials, and lubrication to minimize friction and wear under increased rotational speeds.
- Load Capacity: Evaluate the expected load on the worm wheel and ensure that the selected worm wheel can handle the specific load without deformation or excessive wear. Factors such as tooth profile, material selection, and the number of threads in the worm wheel contribute to its load-carrying capacity.
- Space Constraints: Consider the available space for the installation of the worm wheel. Worm wheels come in various sizes, and it’s essential to choose a size that fits within the designated space without compromising performance or interfering with other components of the system.
- Operating Conditions: Evaluate the operating conditions such as temperature, humidity, and contamination levels. Some applications may require worm wheels with specific material properties to withstand harsh environments or corrosive substances. Consider factors such as corrosion resistance, temperature tolerance, and the need for additional sealing or protection measures.
- Efficiency Requirements: The desired efficiency of the system is an important consideration. Different worm wheel configurations and materials have varying levels of efficiency. Evaluate the trade-off between efficiency, cost, and other application requirements to select a worm wheel that provides the desired balance of performance and cost-effectiveness.
- Maintenance and Lubrication: Consider the maintenance requirements and lubrication needs of the worm wheel. Some worm wheels may require periodic lubrication to ensure smooth operation and minimize wear. Evaluate the accessibility of the worm wheel for lubrication and the frequency of maintenance that the application can accommodate.
- Compatibility: Ensure that the selected worm wheel is compatible with other components of the system, such as the mating worm gear and any associated power transmission elements. Consider factors such as tooth profiles, pitch, backlash control, and the overall system design to ensure proper meshing, alignment, and efficient power transmission.
- Cost Considerations: Finally, consider the cost implications of the selected worm wheel. Evaluate factors such as material costs, manufacturing complexity, and any additional features or customization required. Balance the desired performance and quality with the available budget to select a worm wheel that meets both technical and financial requirements.
By carefully considering these factors, it is possible to select the most suitable worm wheel for a specific application, ensuring optimal performance, longevity, and efficient power transmission.
editor by Dream 2024-05-14
China Standard Worm Gear Gearbox Units with Flange Mounting Type
Product Description
Worm Gear Gearbox Units with Flange Mounting Type
RV Series
Including RV / NMRV / NRV.
Main Characteristic of RV Series Worm Gearbox
RV series worm gear reducer is a new-generation product developed by CHINAMFG on the basis of perfecting WJ series products with a compromise of advanced technology both at home and abroad.
1. High-quality aluminum alloy, light in weight and non-rusting.
2. Large in output torque.
3. Smooth running and low noise,durable in dreadful conditions.
4. High radiation efficiency.
5. Good-looking appearance, durable in service life and small volume.
6. Suitable for omnibearing installation.
Main Materials of RV Series Worm Gearbox
1. Housing: die-cast aluminum alloy(frame size: 571 to 090), cast iron(frame size: 110 to 150).
2. Worm: 20Crm, carbonization quencher heat treatment makes the surface hardness of worm gears up to 56-62 HRX, retain carbonization layer’s thickness between 0.3 and 0.5mm after precise grinding.
3. Worm Wheel: wearable stannum bronze alloy.
SPEED RATIO | 7.5~100 |
OUTPUT TORQUE | <1050NM |
IN POWER | 0.09-11KW |
MOUNTING TYPE | FOOT-MOUNTED FLANGE-MOUNTED |
When working, great load capacity, stable running, low noise with high efficiency. | |||||||
Gear Box’s Usage Field | |||||||
1 | Metallurgy | 11 | Agitator | ||||
2 | Mine | 12 | Rotary weeder | ||||
3 | Machine | 13 | Metallurgy | ||||
4 | Energy | 14 | Compressor | ||||
5 | Transmission | 15 | Petroleum industry | ||||
6 | Water Conserbancy | 16 | Air Compressor | ||||
7 | Tomacco | 17 | Crusher | ||||
8 | Medical | 18 | Materials | ||||
9 | Packing | 19 | Electronics | ||||
10 | Chemical industry | 20 | Textile indutry | ||||
… | … | ||||||
Power | 0.06kw | 0.09kw | 0.12kw | 0.18kw | 0.25kw | 0.37kw | 0.55kw |
0.75kw | 1.1kw | 1.5kw | 2.2kw | 3kw | 4kw | 5.5kw | |
7.5kw | 11kw | 15kw | |||||
Torque | 2.6N.m-3000N.m | ||||||
Ratio | 7.5-100, the double gearbox is more | ||||||
Color | Blue, Silver or as customers’ need | ||||||
Material | Iron or Aluminium | ||||||
Packing | Carton with Plywood Case or as clients’ requirement | ||||||
Type | RV571 | RV030 | RV040 | RV050 | RV063 | RV075 | RV090 |
Weight | 0.7kg | 1.3kg | 2.3kg | 3.5kg | 6.2kg | 9kg | 13kg |
Type | RV110 | RV130 | RV150 | ||||
Weight | 35kg | 60kg | 84kg | ||||
Mounting Methods | Foot Installation | Flange Installation | |||||
For various mortor or double input/output shafts can be equipped |
Product picture:
Structure:
Certificate:
Packing & Delivery:
Our company :
AOKMAN was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.
Customer visiting:
FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
Contact:
Welcome you contace me if you are interested in our product.
Our team will support any need you might have. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Machinery, Industry |
---|---|
Function: | Speed Changing, Speed Reduction |
Layout: | Orthogonal |
Hardness: | Hardened |
Installation: | Horizontal Type |
Step: | Single-Step |
Customization: |
Available
|
|
---|
What factors should be considered when selecting worm wheels for different applications?
When selecting worm wheels for different applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the factors that should be taken into account:
- Torque Requirement: The torque requirement of the application is a crucial factor in selecting the appropriate worm wheel. Consider the maximum torque that the worm wheel needs to transmit and ensure that the selected worm wheel has a sufficient torque rating to handle the load without excessive wear or failure.
- Speed Range: The speed range of the application influences the choice of worm wheel. Different worm wheel configurations are suitable for specific speed ranges. For high-speed applications, it may be necessary to consider factors such as tooth design, materials, and lubrication to minimize friction and wear under increased rotational speeds.
- Load Capacity: Evaluate the expected load on the worm wheel and ensure that the selected worm wheel can handle the specific load without deformation or excessive wear. Factors such as tooth profile, material selection, and the number of threads in the worm wheel contribute to its load-carrying capacity.
- Space Constraints: Consider the available space for the installation of the worm wheel. Worm wheels come in various sizes, and it’s essential to choose a size that fits within the designated space without compromising performance or interfering with other components of the system.
- Operating Conditions: Evaluate the operating conditions such as temperature, humidity, and contamination levels. Some applications may require worm wheels with specific material properties to withstand harsh environments or corrosive substances. Consider factors such as corrosion resistance, temperature tolerance, and the need for additional sealing or protection measures.
- Efficiency Requirements: The desired efficiency of the system is an important consideration. Different worm wheel configurations and materials have varying levels of efficiency. Evaluate the trade-off between efficiency, cost, and other application requirements to select a worm wheel that provides the desired balance of performance and cost-effectiveness.
- Maintenance and Lubrication: Consider the maintenance requirements and lubrication needs of the worm wheel. Some worm wheels may require periodic lubrication to ensure smooth operation and minimize wear. Evaluate the accessibility of the worm wheel for lubrication and the frequency of maintenance that the application can accommodate.
- Compatibility: Ensure that the selected worm wheel is compatible with other components of the system, such as the mating worm gear and any associated power transmission elements. Consider factors such as tooth profiles, pitch, backlash control, and the overall system design to ensure proper meshing, alignment, and efficient power transmission.
- Cost Considerations: Finally, consider the cost implications of the selected worm wheel. Evaluate factors such as material costs, manufacturing complexity, and any additional features or customization required. Balance the desired performance and quality with the available budget to select a worm wheel that meets both technical and financial requirements.
By carefully considering these factors, it is possible to select the most suitable worm wheel for a specific application, ensuring optimal performance, longevity, and efficient power transmission.
How do worm wheels contribute to the adaptability and versatility of mechanical systems in different settings?
Worm wheels play a significant role in enhancing the adaptability and versatility of mechanical systems across various settings. Here’s a detailed explanation of how worm wheels contribute to these aspects:
- Variable Speed Ratios: Worm wheels allow for the transmission of motion between the worm and the wheel with variable speed ratios. By changing the number of teeth on the worm wheel or the pitch diameter of the worm, different speed ratios can be achieved. This flexibility in speed control enables mechanical systems to adapt to different operating conditions, accommodate varying load requirements, and provide the desired output speeds for specific applications.
- Directional Reversibility: One of the key advantages of worm wheels is their ability to transmit motion in both clockwise and counterclockwise directions. By reversing the direction of the worm’s rotation, the motion can be transmitted in the opposite direction through the worm wheel. This feature contributes to the adaptability of mechanical systems, allowing for bidirectional operation and versatility in various applications where reversible motion is required.
- Compact Design: Worm wheels offer a compact and space-efficient design due to their high gear ratio capabilities. The worm’s helical shape allows for a large reduction in speed within a relatively small package size. This compact design is advantageous in applications where space is limited or where a high gear reduction is required without occupying excessive space. The compactness of worm wheels enhances the adaptability of mechanical systems in diverse settings, including compact machinery, automotive applications, or tight spaces.
- High Torque Transmission: Worm wheels are known for their ability to transmit high torque. The sliding action between the worm and the worm wheel creates a large contact area, enabling efficient torque transfer. This high torque transmission capability makes worm wheels suitable for applications requiring high torque output, such as lifting mechanisms, conveyor systems, or heavy-duty machinery. The ability to handle high torque contributes to the versatility and adaptability of mechanical systems in different settings.
- Mechanical Advantage: Worm wheels provide a mechanical advantage by converting a small rotational input force into a larger rotational output force. This mechanical advantage is a result of the gear ratio between the worm and the worm wheel. It allows mechanical systems to generate higher output forces or torques than what is applied at the input. This feature is valuable in applications where increased force or torque amplification is required, enabling systems to adapt to varying load demands and perform tasks that would otherwise be challenging or impractical.
- Noise Reduction: Worm wheels are known for their quiet operation due to the sliding contact between the worm and the worm wheel teeth. This sliding action reduces the impact and noise associated with gear meshing compared to other types of gears, such as spur gears or bevel gears. The noise reduction capability of worm wheels makes them suitable for applications where noise control is important, such as in precision equipment, office machinery, or noise-sensitive environments. This contributes to the adaptability of mechanical systems in different settings that require low noise levels.
Overall, worm wheels contribute significantly to the adaptability and versatility of mechanical systems in diverse settings. Their variable speed ratios, directional reversibility, compact design, high torque transmission, mechanical advantage, and noise reduction capabilities enable them to meet specific requirements and perform a wide range of tasks in different applications.
How does the design of worm wheels impact their performance in different environments?
The design of worm wheels plays a significant role in determining their performance in different environments. Here’s a detailed explanation of how the design of worm wheels impacts their performance:
- Tooth Profile: The tooth profile of a worm wheel can significantly affect its performance. Different tooth profiles, such as involute, cycloidal, or modified profiles, offer varying characteristics in terms of contact area, load distribution, and efficiency. The selection of the appropriate tooth profile depends on factors such as the application requirements, load capacity, and desired efficiency. For example, in applications where high load capacity is crucial, a modified tooth profile may be preferred to enhance the gear’s strength and durability.
- Material Selection: The choice of material for worm wheels is crucial for their performance in different environments. Worm wheels can be made from various materials, including steel, bronze, brass, or specialized alloys. Each material offers different properties such as strength, wear resistance, corrosion resistance, and self-lubrication. The selection of the appropriate material depends on factors such as the operating conditions, anticipated loads, and environmental factors. For example, in applications where corrosion resistance is essential, a stainless steel or corrosion-resistant alloy may be chosen to ensure long-term performance in harsh environments.
- Lubrication and Sealing: Proper lubrication and sealing are vital for the performance of worm wheels, especially in challenging environments. The design of worm wheels should consider factors such as lubrication requirements, sealing mechanisms, and the ability to prevent contamination ingress. Lubrication ensures smooth operation, reduces friction, and minimizes wear between the worm gear and the worm wheel. Effective sealing prevents the entry of contaminants such as dust, dirt, or moisture, which can adversely affect the gear’s performance and lifespan. The design should incorporate appropriate lubrication and sealing provisions based on the specific environmental conditions.
- Heat Dissipation: In environments where high temperatures are present, the design of worm wheels should consider heat dissipation mechanisms. Excessive heat can lead to premature wear, reduced efficiency, and potential damage to the gear system. The design may include features such as cooling fins, heat sinks, or ventilation channels to facilitate heat dissipation and maintain optimal operating temperatures. Proper heat dissipation design ensures the longevity and reliability of worm wheels in high-temperature environments.
- Noise and Vibration Control: The design of worm wheels can incorporate features to control noise and vibration, which are particularly important in certain environments. Modifications to the tooth profile, manufacturing tolerances, or the addition of damping elements can help reduce noise and vibration generation. In noise-sensitive environments or applications where excessive vibration can affect precision or stability, the design should prioritize noise and vibration control measures to ensure smooth and quiet operation.
- Environmental Factors: The design of worm wheels should consider specific environmental factors that can impact their performance. These factors may include temperature extremes, humidity, corrosive substances, abrasive particles, or even exposure to outdoor elements. The design may incorporate protective coatings, specialized materials, or enhanced sealing mechanisms to mitigate the effects of these environmental factors. Considering and addressing the specific environmental challenges helps ensure optimal performance and longevity of worm wheels in different environments.
By carefully considering the design aspects mentioned above, worm wheels can be tailored to perform reliably and efficiently in different environments. The design choices made for tooth profile, material selection, lubrication, heat dissipation, noise and vibration control, and addressing environmental factors are essential for optimizing the performance and durability of worm wheels in their intended applications.
editor by Dream 2024-05-07
China Good quality Manufacturer for Worm Gear Box Gearbox Helical Bevel Gear
Product Description
1 |
Name |
Precision gear |
2 |
Size |
Products can be customized. |
3 |
Manufacture Standard |
5-8 Grade ISO1328-1997. |
4 |
Material |
45#Steel,20CrMnTi,40Cr,20CrNiMo,20MnCr5,GCR15SiMn,42CrMo,2Cr13stainless steel,Nylon,Bakelite,Copper,Aluminium.etc |
5 |
Production Process |
The main process is Gear Hobbing, Gear Shaping and Gear Grinding, Selecting production process according to the different |
6 |
Heat Treatment |
Carburizing and quenching ,High-frequency quenching,Nitriding, Hardening and tempering, Selecting heat treatment according to the |
7 |
Testing Equipment |
Rockwell hardness tester 500RA, Double mesh instrument HD-200B & 3102, Gear measurement center instrument CNC3906T other High precision detection equipments |
8 |
Certification |
GB/T19001-2016/ISO9001:2015 |
9 |
Usage |
Used in printing machine, cleaning machine, medical equipment, garden machine, construction machine, electric car, valve, |
10 |
Package |
According to customer’s request |
COMPANY PROFILE
ZheJiang KSN Precision Forging Technology Development Co., Ltd.
It was established in 2005, located in HangZhou City, ZheJiang Province, is a professional manufacturer and exporter of precision forging products.
KSN focuses on different types of free forging, open forging and precision closed forging, has accumulated a lot of practical forging experience and technical support.
Nearly 95% of the products are exported to Europe, the United States, the Middle East, Southeast Asia and other countries.
PRODUCTION CAPACITY
TESTING CAPACITY
PRODUCTION PROCESS
PACKAGE
CUSTOMER PHOTOS
WHY CHOOSE US
FAQ
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Hardness: | Hardened Tooth Surface |
Gear Position: | External Gear |
Samples: |
US$ 5/Piece
1 Piece(Min.Order) | Order Sample |
---|
Customization: |
Available
|
|
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
In what industries or applications are worm wheels commonly utilized?
Worm wheels, in conjunction with worm gears, find wide applications across various industries that require precise motion control, high torque, and compact design. Here’s a detailed explanation of the industries and applications where worm wheels are commonly utilized:
1. Automotive Industry: Worm wheels are used in automotive applications, such as power steering systems. They provide the necessary gear reduction to convert the rotational motion from the steering wheel into the appropriate steering force, enabling smooth and responsive steering control.
2. Industrial Machinery: Worm wheels are widely employed in various industrial machinery applications, including machine tools, conveyors, packaging machines, and material handling equipment. They provide reliable and efficient power transmission, enabling precise control of speed and torque in these systems.
3. Elevators: Worm wheels play a vital role in elevator systems, where they are used in the elevator drive mechanism to control the movement of the elevator car. They provide the necessary gear reduction to ensure smooth and controlled vertical motion, along with the ability to hold the car in position when the power is removed.
4. Robotics: Worm wheels are commonly utilized in robotic systems, particularly in robot joints and manipulators. They allow for precise and controlled movement, enabling robots to perform intricate tasks with accuracy and repeatability.
5. Printing Presses: Printing presses often employ worm wheels in their drive systems. The worm gear and worm wheel combination helps in achieving the required gear reduction for controlling the paper feed and maintaining consistent print quality.
6. Conveyor Systems: Worm wheels are found in conveyor systems that require controlled and synchronized movement of goods or materials. They provide the necessary torque and gear reduction to ensure smooth and efficient operation of the conveyor belts or rollers.
7. Agriculture and Farming: Worm wheels are utilized in various agricultural machinery, such as tractor attachments, harvesting equipment, and irrigation systems. They facilitate the transmission of power and control the rotational motion required for specific farming operations.
8. Renewable Energy: Worm wheels are used in renewable energy applications, including wind turbines and solar tracking systems. They help in achieving the required gear reduction to optimize power generation and ensure efficient tracking of the sun or wind direction.
9. Food Processing: Worm wheels are employed in food processing equipment, such as mixers, grinders, and dough kneaders. They provide the necessary gear reduction and enable precise control of rotational speed for efficient food preparation and processing.
10. Medical Equipment: Worm wheels find applications in medical equipment, such as surgical robots, imaging devices, and patient positioning systems. They contribute to precise and controlled movements, enabling accurate medical procedures and patient care.
These are just a few examples of the industries and applications where worm wheels are commonly utilized. Their ability to provide high gear reduction, compact design, and reliable power transmission makes them suitable for a wide range of mechanical systems that require precise motion control and high torque output.
How do worm wheels contribute to the precision and accuracy of motion in machinery?
Worm wheels play a significant role in achieving precision and accuracy of motion in machinery. Here’s a detailed explanation of how worm wheels contribute to precision and accuracy:
- Reduced Backlash: Backlash refers to the amount of clearance or play between meshing gears, which can result in undesired movement or positioning errors. Worm wheels have a self-locking mechanism that minimizes or eliminates backlash. The helical teeth of the worm wheel engage with the worm gear at an angle, creating a wedging effect that prevents reverse motion. This inherent self-locking property ensures precise positioning and eliminates backlash, contributing to the overall precision of motion.
- High Gear Reduction Ratio: Worm wheels offer high gear reduction ratios, allowing for fine control and precise motion. The helical shape of the worm gear teeth and the interaction with the worm wheel enable gear ratios ranging from 5:1 to 100:1 or even higher. This high reduction ratio allows for slower rotational output and finer increments of motion, enhancing precision in applications that require precise positioning or control.
- Single Directional Control: Worm wheels provide excellent directional control, allowing power transmission in a single direction only. The self-locking nature of the worm wheel prevents any reverse motion from the output side to the input side. This property is particularly beneficial in applications where precise and accurate motion in a specific direction is required, such as in robotics or CNC machinery.
- Smooth Operation: The helical tooth profile of the worm wheel contributes to smooth and quiet operation. The helical teeth engage gradually, resulting in a smooth transfer of power and reduced noise and vibration. This smooth operation is crucial for applications that require precise and accurate motion, as it helps minimize disturbances and ensure consistent movement without jarring or jerking.
- Increased Contact Area: The sliding action between the worm gear and the worm wheel creates a larger contact area compared to other gear types. The increased contact area allows for better load distribution and improved torque transmission. This helps to minimize tooth wear, enhance durability, and maintain the accuracy of motion over an extended period of operation.
- Compact Design: Worm wheels offer a compact design due to their perpendicular arrangement. The compactness allows for efficient use of space and integration into machinery with limited space constraints. The reduced size and weight contribute to improved stability and accuracy by minimizing flexing or bending that can occur in larger gear systems.
By incorporating worm wheels into machinery, engineers can achieve precise and accurate motion control, ensuring the desired positioning, repeatability, and overall performance of the system. These characteristics make worm wheels suitable for a wide range of applications that require high precision and accuracy, such as robotics, machine tools, positioning systems, and automation equipment.
What factors should be considered when selecting worm wheels for different applications?
When selecting worm wheels for different applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the factors that should be taken into account:
- Torque Requirement: The torque requirement of the application is a crucial factor in selecting the appropriate worm wheel. Consider the maximum torque that the worm wheel needs to transmit and ensure that the selected worm wheel has a sufficient torque rating to handle the load without excessive wear or failure.
- Speed Range: The speed range of the application influences the choice of worm wheel. Different worm wheel configurations are suitable for specific speed ranges. For high-speed applications, it may be necessary to consider factors such as tooth design, materials, and lubrication to minimize friction and wear under increased rotational speeds.
- Load Capacity: Evaluate the expected load on the worm wheel and ensure that the selected worm wheel can handle the specific load without deformation or excessive wear. Factors such as tooth profile, material selection, and the number of threads in the worm wheel contribute to its load-carrying capacity.
- Space Constraints: Consider the available space for the installation of the worm wheel. Worm wheels come in various sizes, and it’s essential to choose a size that fits within the designated space without compromising performance or interfering with other components of the system.
- Operating Conditions: Evaluate the operating conditions such as temperature, humidity, and contamination levels. Some applications may require worm wheels with specific material properties to withstand harsh environments or corrosive substances. Consider factors such as corrosion resistance, temperature tolerance, and the need for additional sealing or protection measures.
- Efficiency Requirements: The desired efficiency of the system is an important consideration. Different worm wheel configurations and materials have varying levels of efficiency. Evaluate the trade-off between efficiency, cost, and other application requirements to select a worm wheel that provides the desired balance of performance and cost-effectiveness.
- Maintenance and Lubrication: Consider the maintenance requirements and lubrication needs of the worm wheel. Some worm wheels may require periodic lubrication to ensure smooth operation and minimize wear. Evaluate the accessibility of the worm wheel for lubrication and the frequency of maintenance that the application can accommodate.
- Compatibility: Ensure that the selected worm wheel is compatible with other components of the system, such as the mating worm gear and any associated power transmission elements. Consider factors such as tooth profiles, pitch, backlash control, and the overall system design to ensure proper meshing, alignment, and efficient power transmission.
- Cost Considerations: Finally, consider the cost implications of the selected worm wheel. Evaluate factors such as material costs, manufacturing complexity, and any additional features or customization required. Balance the desired performance and quality with the available budget to select a worm wheel that meets both technical and financial requirements.
By carefully considering these factors, it is possible to select the most suitable worm wheel for a specific application, ensuring optimal performance, longevity, and efficient power transmission.
editor by Dream 2024-04-25
China OEM Custom Cylindrical Gearbox Spline Transmission Precision Planetary Pinion Cog-Wheel Worm Gear
Product Description
Product Description
Custom Cylindrical gearbox Spline transmission precision Planetary Pinion cog-wheel Worm Gear
Item | Customized machined machining gears | |
Process | CNC machining,CNC milling, cnc lathe machining | |
material | steel, stainless steel, carbon steel,brass,C360 brass copper, aluminum 7075,7068 brass,C360 brass copper, aluminum Nylon, PA66, NYLON , ABS, PP,PC,PE,POM,PVC,PU,TPR,TPE,TPU,PA,PET,HDPE,PMMA etc | |
Quality Control | ISO9001 and ISO14001 | |
Dimension bore tolerances | -/+0.01mm | |
Quality standard | AGMA, JIS, DIN | |
Surface treatment | Blackening, plated, anodizing, hard anodizing etc | |
Gear hardness | 30 to 60 H.R.C | |
Size/Color | Gears and parts dimensions are according to drawings from customer, and colors are customized | |
Surface treatment | Polished or matte surface, painting, texture, vacuum aluminizing and can be stamped with logo etc. | |
Dimensions Tolerance | ±0.01mm or more precise | |
Samples confirmation and approval | samples shipped for confirmation and shipping cost paid by customers | |
Package | Inner clear plastic bag/outside carton/wooden pallets/ or any other special package as per customer’s requirements. | |
Delivery Time | Total takes 2~~8weeks usually | |
Shipping |
Usual FEDEX, UPS, DHL, TNT, EMS or base on customer’s requirement. |
Production management:
1. The workers are trained to inspect the gears and notice any defect in production in time.
2. QC will check 1pcs every 100pcs in CNC machining, and gears will meet all dimension tolerances.
3. Gears will be inspected at every step, and gears will be inspected before shipment, and all inspection records will be kept in our factory for 3 years.
4. Our sales will send you pictures at every gears production steps, and you will know the detailed production status, and you can notice any possibility of mistake, for our sales, QC and workers are keeping close watch on all production.
5. You will feel us working very carefully to assure the quality and easy to work with,
6. we cherish every inquiry, every opportunity to make gears and parts and cherish every customer.
QUALITY CONTROL PROCESS:
1) Inspecting the raw material –IQC)
2) Checking the details before the production line operated
3) Have full inspection and routing inspection during mass production—In process quality control (IPQC)
4) Checking the gears after production finished—- (FQC)
5) Checking the gears after they are finished—–Outgoing quality control (OQC)
Service:
1. Molds designs as per customers’ gears drawing;
2. Submitting molds drawings to customers to review and confirm before mols production.
3. Providing samples with whole dimensions and cosmetic inspection report, material certification to customers.
4. Providing inspection report of important dimensions and cosmetic in batches parts.
Packing and shipment:
1. Gears are well and carefully packed in PP bags in CTNS, strong enough for express shipping, air shipment or sea shipment.
2. Air shipment, sea shipment or shipment by DHL, UPS, FedEx or TNT are availabe.
3. Trade terms: EXW, FOB HangZhou, or CIF
4. All shippings will be carefully arranged and will reach your places fast and safely.
FAQ
Q1: How to guarantee the Quality of gears and parts?
We are ISO 9001:2008 certified factory and we have the integrated system for industrial parts quality control. We have IQC (incoming quality control),
IPQCS (in process quality control section), FQC (final quality control) and OQC (out-going quality control) to control each process of industrial parts prodution.
Q2: What are the Advantage of your gears and parts?
Our advantage is the competitive and reasonable prices, fast delivery and high quality. Our eployees are responsible-oriented, friendly-oriented,and dilient-oriented.
Our industrial parts products are featured by strict tolerance, smooth finish and long-life performance.
Q3: what are our machining equipments?
Our machining equipments include plasticn injection machinies, CNC milling machines, CNC turning machines, stamping machines, hobbing machines, automatic lathe machines, tapping machines, grinding machines, cutting machines and so on.
Q4: What shipping ways do you use?
Generally, we will use UPS DHL or FEDEX and sea shipping
5: What materials can you process?
For plastic injection gears and parts, the materials are Nylon, PA66, NYLON with 30% glass fibre, ABS, PP,PC,PE,POM,PVC,PU,TPR,TPE,TPU,PA,PET,HDPE,PMMA etc.
For metal and machining gears and parts, the materials are brass, bronze, copper, stainless steel, steel, aluminum, titanium plastic etc.
Q6: How long is the Delivery for Your gears and parts?
Generally , it will take us 15 working days for injection or machining, and we will try to shorten our lead time.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Electric Cars, Machinery, Toy, Agricultural Machinery, Car |
---|---|
Hardness: | Hardened Tooth Surface |
Gear Position: | External Gear |
Manufacturing Method: | Cut Gear |
Toothed Portion Shape: | Curved Gear |
Material: | Stainless Steel |
Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
|
|
---|
Can you explain the role of a worm wheel in conjunction with a worm gear?
In mechanical systems, a worm wheel and a worm gear work together to achieve the transmission of motion and power between two perpendicular shafts. The worm gear is a screw-like gear, while the worm wheel is a circular gear with teeth cut in a helical pattern. Here’s a detailed explanation of the role of a worm wheel in conjunction with a worm gear:
The primary function of a worm wheel and worm gear combination is to provide a compact and efficient means of transmitting rotational motion and power at a right angle. The interaction between the worm gear and the worm allows for high gear reduction ratios, making it suitable for applications that require large speed reductions and high torque output.
The worm gear, or worm, is a threaded shaft resembling a screw. It is the driving component of the system and is typically turned by a motor or other power source. The threads on the worm engage with the teeth of the worm wheel, causing the wheel to rotate.
The helical shape of the worm gear teeth and the orientation of the threads on the worm are designed to ensure smooth and efficient power transmission. As the worm rotates, the sliding action between the threads of the worm and the helical teeth of the worm wheel enables the transfer of motion.
The gear ratio between the worm and worm wheel determines the speed reduction and torque multiplication achieved. The number of teeth on the worm wheel compared to the number of threads on the worm determines the gear ratio. For example, a worm wheel with 40 teeth and a worm with one thread would result in a gear ratio of 40:1, meaning the output shaft of the worm wheel rotates once for every 40 rotations of the worm.
The key role of the worm wheel is to receive the rotational motion from the worm and transmit it to the output shaft. It converts the rotary motion of the worm into rotary motion in a different direction, typically at a right angle.
The worm wheel also provides mechanical advantage by multiplying the torque output. Due to the helical shape of the teeth, the sliding action between the worm and the worm wheel allows for a larger contact area and load distribution, resulting in increased torque output at the output shaft.
The combination of the worm gear and worm wheel offers several advantages in mechanical systems:
- High Gear Reduction: The worm gear and worm wheel enable significant speed reduction while increasing torque output, making them suitable for applications requiring high torque and low speed.
- Self-Locking: The friction between the worm gear and the worm prevents backdriving, allowing the worm wheel to maintain its position even when the driving force is removed.
- Compact Design: The perpendicular arrangement of the worm gear and worm wheel allows for a compact and space-saving design, making it advantageous in applications with limited space.
- Quiet Operation: The sliding action between the worm gear and worm wheel helps distribute the load over multiple teeth, resulting in smoother and quieter operation.
- Directional Control: The worm gear and worm wheel combination can provide unidirectional motion, preventing motion from the output side back to the input side due to their self-locking property.
Worm gear and worm wheel systems are commonly used in various applications, including automotive, industrial machinery, elevators, conveyor systems, and robotics. Their unique characteristics make them suitable for tasks that require precise control, high torque, and compact design.
It is important to note that proper lubrication, maintenance, and design considerations are crucial for ensuring the reliable and efficient operation of worm gear and worm wheel systems. Regular inspections and adherence to manufacturer guidelines are essential for maximizing the lifespan and performance of these components.
What maintenance practices are recommended for worm wheels to ensure optimal functionality?
Maintaining worm wheels is crucial for ensuring their optimal functionality and longevity. Here are some recommended maintenance practices for worm wheels:
- Regular Inspection: Perform regular visual inspections of the worm wheels to check for any signs of wear, damage, or abnormal operating conditions. Look for indications such as pitting, chipping, excessive tooth wear, or misalignment. Early detection of issues allows for timely intervention and prevents further damage.
- Cleaning: Keep the worm wheels clean from dirt, dust, and debris that may accumulate on the gear surfaces. Use a soft brush or compressed air to remove any contaminants that could potentially affect the gear’s performance or lead to premature wear. Avoid using harsh cleaning agents that may damage the gear material or lubrication.
- Lubrication: Ensure proper lubrication of the worm wheels according to the manufacturer’s recommendations. Lubrication reduces friction, minimizes wear, and helps dissipate heat. Follow the specified lubrication intervals and use the appropriate lubricant type and viscosity for the specific application. Monitor the lubricant level regularly and replenish or replace it as needed.
- Alignment and Adjustments: Check the alignment of the worm wheel with the worm gear to ensure proper meshing and load distribution. Misalignment can result in increased wear, reduced efficiency, and potential damage. If misalignment is detected, consult the manufacturer’s guidelines for proper alignment procedures and make necessary adjustments.
- Torque Monitoring: Periodically monitor the torque levels in the system to ensure they are within the recommended range. Excessive torque can lead to increased wear and potential gear failure. Use appropriate torque monitoring devices or methods to measure and verify that the torque values are within the specified limits.
- Temperature Monitoring: Keep an eye on the operating temperature of the worm wheels. Excessive heat can indicate issues such as inadequate lubrication, overloading, or misalignment. Monitor the temperature using appropriate temperature measurement devices and take corrective actions if abnormal temperatures are observed.
- Replacement of Worn Parts: If any components of the worm wheel assembly, such as the gear or bearings, show significant wear or damage that cannot be rectified through maintenance, consider replacing those worn parts. Using worn components can compromise the performance and reliability of the worm wheel system.
- Training and Documentation: Ensure that maintenance personnel are properly trained on the specific maintenance requirements and procedures for worm wheels. Maintain accurate documentation of maintenance activities, including inspection records, lubrication schedules, and any repairs or replacements performed. This documentation helps track the maintenance history and assists in identifying any recurring issues or trends.
By following these maintenance practices, worm wheels can be kept in optimal condition, ensuring their functionality, reliability, and longevity. Regular inspections, proper cleaning, lubrication, alignment, torque and temperature monitoring, timely replacement of worn parts, and well-documented maintenance activities are essential for the effective maintenance of worm wheels.
How does the design of a worm wheel contribute to the efficiency of power transmission?
The design of a worm wheel plays a significant role in ensuring efficient power transmission in mechanical systems. The specific characteristics and features of the worm wheel design contribute to its efficiency. Here’s a detailed explanation of how the design of a worm wheel contributes to the efficiency of power transmission:
1. Helical Tooth Profile: The teeth of a worm wheel are cut in a helical pattern around its circumference. This helical tooth profile allows for a larger contact area between the worm gear and the worm wheel, distributing the load over multiple teeth. As a result, it reduces the stress on individual teeth and minimizes wear, leading to improved efficiency and longevity of the gear system.
2. Sliding Action: The interaction between the worm gear and the worm involves a sliding action. As the worm rotates, its threads engage with the helical teeth of the worm wheel, causing a sliding motion between the two components. This sliding action helps distribute the load and reduces the concentration of forces on specific points, minimizing friction and wear. Consequently, the sliding action contributes to smoother power transmission and improved overall efficiency.
3. Lubrication: Proper lubrication is essential for the efficient operation of a worm wheel. Lubricants reduce friction between the mating surfaces, minimizing energy losses due to heat and wear. The helical tooth profile and sliding action of the worm wheel allow for effective lubrication distribution along the gear teeth and the worm’s threads, ensuring smooth movement and reducing power losses due to friction.
4. Material Selection: The choice of materials for constructing the worm wheel can impact its efficiency. Materials with low friction coefficients and high wear resistance, such as hardened steel or bronze alloys, are often used to minimize friction losses and ensure long-lasting performance. Additionally, selecting materials with appropriate strength and hardness characteristics helps maintain the dimensional stability and integrity of the gear teeth, further enhancing the efficiency of power transmission.
5. Gear Geometry and Tooth Profile: The precise design of the teeth on the worm wheel contributes to efficient power transmission. Factors such as the tooth profile, pressure angle, tooth width, and backlash control impact the meshing and engagement between the worm gear and the worm wheel. Optimized gear geometry ensures proper load distribution, reduces tooth deflection, and minimizes power losses due to inefficient contact and meshing of the teeth.
6. Preloading and Backlash Control: Proper preloading and backlash control in the worm wheel system can improve its efficiency. Preloading refers to applying a controlled amount of force to eliminate any clearance or backlash between the worm gear and the worm wheel. This reduces vibrations, improves the contact between the teeth, and minimizes power losses associated with backlash. By ensuring a precise and tight meshing between the components, the efficiency of power transmission is enhanced.
7. Manufacturing Precision: The manufacturing precision of the worm wheel is crucial for its efficiency. Accurate machining and assembly processes are necessary to achieve the desired gear geometry, tooth profile, and dimensional tolerances. High manufacturing precision ensures proper alignment and meshing of the worm gear and the worm wheel, reducing unnecessary friction and power losses caused by misalignment or poor gear quality.
By incorporating these design considerations and optimizing the various aspects of worm wheel design, such as tooth profile, lubrication, materials, and manufacturing precision, the efficiency of power transmission can be maximized. This results in reduced energy losses, improved overall system performance, and extended gear life.
editor by Dream 2024-04-22
China supplier 12V DC Electric Motor Gearbox Electric Motor 63mm Worm Gear Brushed DC
Product Description
Product Description
Product Description:
Introducing the High Power 63mm DC Worm Gear Motor
Upgrade to the High Power version of the 63mm DC worm gear motor from HangZhou Xihu (West Lake) Dis. Motor Co., Ltd. This motor is designed for optimal performance with a 50A stall current, making it ideal for high-power applications.
Key Features:
- Available with a 48CPR encoder for precise control
- Option to include a back shaft for added versatility
- Choose between a metal brush or carbon brush for customized performance
Whether you need reliable power and precision, this 63mm DC worm gear motor is the perfect choice for your project. Upgrade to the High Power version today!
63mm,76mm turboworm gear box motor, low noise and small load torque selection of plastic gear of POM material, there is no requirement for noise, but the choice of metal gear with large load torque,
The motor is used in rolling gates, automatic fence doors, glass doors, wipers, wheelchairs, various lifting equipment, kitchen supplies and other products.
The encoder can be used as a low cost servo motor and has the same function.
Equipped with left and right gearboxes can be used symmetrically, using rolling shafts and oil-bearing to meet various scenarios.
Various parameters can be adjusted according to customer requirements, the maximum torque of 12V/24V is 50N.m, for the speed of 10RPM
voltage VDC |
no load speed RPM |
no load current A |
load torque KG.CM |
on load speed RPM |
power W |
ratio |
12 | 80 | 1.8 | 60 | 68 | 80 | 60:1 |
12 | 130 | 1.2 | 33 | 110 | 30 | 20:1 |
12 | 150 | 1.2 | 45 | 130 | 30 | 20:1 |
12 | 170 | 1.4 | 35 | 150 | 45 | 24:1 |
24 | 30 | 1.4 | 60 | 25 | 30 | 60:1 |
24 | 65 | 120 | 50 | 60 | 80 | 20:1 |
24 | 210 | 1.0 | 40 | 180 | 45 | 75:1 |
Detailed Photos
Product Parameters
Certifications
Packaging & Shipping
Installation Instructions
Company Profile
FAQ
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | DC Worm Gear Motor |
---|---|
Operating Speed: | Low Speed |
Excitation Mode: | Excited |
Function: | Driving |
Casing Protection: | Open Type |
Number of Poles: | 2 |
Customization: |
Available
|
|
---|
What factors should be considered when selecting worm wheels for different applications?
When selecting worm wheels for different applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the factors that should be taken into account:
- Torque Requirement: The torque requirement of the application is a crucial factor in selecting the appropriate worm wheel. Consider the maximum torque that the worm wheel needs to transmit and ensure that the selected worm wheel has a sufficient torque rating to handle the load without excessive wear or failure.
- Speed Range: The speed range of the application influences the choice of worm wheel. Different worm wheel configurations are suitable for specific speed ranges. For high-speed applications, it may be necessary to consider factors such as tooth design, materials, and lubrication to minimize friction and wear under increased rotational speeds.
- Load Capacity: Evaluate the expected load on the worm wheel and ensure that the selected worm wheel can handle the specific load without deformation or excessive wear. Factors such as tooth profile, material selection, and the number of threads in the worm wheel contribute to its load-carrying capacity.
- Space Constraints: Consider the available space for the installation of the worm wheel. Worm wheels come in various sizes, and it’s essential to choose a size that fits within the designated space without compromising performance or interfering with other components of the system.
- Operating Conditions: Evaluate the operating conditions such as temperature, humidity, and contamination levels. Some applications may require worm wheels with specific material properties to withstand harsh environments or corrosive substances. Consider factors such as corrosion resistance, temperature tolerance, and the need for additional sealing or protection measures.
- Efficiency Requirements: The desired efficiency of the system is an important consideration. Different worm wheel configurations and materials have varying levels of efficiency. Evaluate the trade-off between efficiency, cost, and other application requirements to select a worm wheel that provides the desired balance of performance and cost-effectiveness.
- Maintenance and Lubrication: Consider the maintenance requirements and lubrication needs of the worm wheel. Some worm wheels may require periodic lubrication to ensure smooth operation and minimize wear. Evaluate the accessibility of the worm wheel for lubrication and the frequency of maintenance that the application can accommodate.
- Compatibility: Ensure that the selected worm wheel is compatible with other components of the system, such as the mating worm gear and any associated power transmission elements. Consider factors such as tooth profiles, pitch, backlash control, and the overall system design to ensure proper meshing, alignment, and efficient power transmission.
- Cost Considerations: Finally, consider the cost implications of the selected worm wheel. Evaluate factors such as material costs, manufacturing complexity, and any additional features or customization required. Balance the desired performance and quality with the available budget to select a worm wheel that meets both technical and financial requirements.
By carefully considering these factors, it is possible to select the most suitable worm wheel for a specific application, ensuring optimal performance, longevity, and efficient power transmission.
What is a worm wheel, and how does it function in mechanical systems?
A worm wheel, also known as a worm gear or worm gear wheel, is an important component in mechanical systems that helps transmit motion and power between two perpendicular shafts. It consists of a circular gear called the worm wheel or worm gear, and a screw-like gear called the worm or worm screw. Here’s a detailed explanation of what a worm wheel is and how it functions in mechanical systems:
A worm wheel is a gear with teeth that are cut in a helical pattern around its circumference. It meshes with the worm, which has a threaded shaft resembling a screw. The worm gear and the worm are designed in such a way that their threads have a specific shape and orientation to ensure smooth and efficient power transmission.
The primary function of a worm wheel in mechanical systems is to provide a compact and efficient means of transmitting rotational motion and power between shafts that are oriented at right angles to each other. The interaction between the worm gear and the worm allows for high gear reduction ratios, making it suitable for applications that require large speed reductions and high torque output.
When the worm rotates, its threaded shaft engages with the teeth of the worm wheel, causing the wheel to rotate. The helical shape of the worm gear teeth allows for a sliding action between the worm and the worm wheel, resulting in a smooth and continuous transfer of motion. The gear ratio between the worm and worm wheel determines the speed reduction and torque multiplication achieved.
The unique design of the worm wheel provides several advantages in mechanical systems:
- High Gear Reduction: The helical threads of the worm wheel enable a significant reduction in rotational speed while increasing torque output. This makes it suitable for applications where a large reduction in speed is required, such as in machinery with heavy loads or precise positioning requirements.
- Self-Locking: The frictional force between the worm gear and the worm prevents backdriving, which means the worm wheel can hold its position even when the driving force is removed. This self-locking feature is beneficial for applications where it is necessary to prevent the transmission of motion from the output side back to the input side.
- Compact Design: The perpendicular arrangement of the worm and worm wheel allows for a compact and space-saving design. This is advantageous in applications where space constraints are a concern, such as in automotive, robotics, or machinery with limited available space.
- Quiet Operation: The sliding action between the worm and the worm wheel helps distribute the load over multiple teeth, reducing noise and vibration. This makes worm wheel mechanisms suitable for applications that require smooth and quiet operation, such as in precision equipment or gearboxes.
- Efficiency: Worm wheel systems can achieve high efficiency when properly designed and lubricated. However, they typically have lower efficiency compared to other types of gear systems due to the sliding motion and increased friction between the components.
Worm wheels are commonly used in various mechanical systems, including automotive transmissions, industrial machinery, elevators, printing presses, and steering systems. Their unique characteristics make them well-suited for applications that require precise control, high torque, and compact design.
It is important to note that proper lubrication, maintenance, and design considerations are crucial for ensuring the reliable and efficient operation of worm wheel systems. Regular inspections and adherence to manufacturer guidelines are essential for maximizing the lifespan and performance of worm wheel components.
Are there innovations or advancements in worm wheel technology that have emerged in recent years?
Yes, there have been significant innovations and advancements in worm wheel technology in recent years. Here’s a detailed explanation of some notable developments:
- Improved Materials: The development of new materials and advanced manufacturing techniques has contributed to improved performance and durability of worm wheels. High-performance materials such as hardened steels, alloys, and composite materials are being used to enhance the strength, wear resistance, and load-carrying capacity of worm wheels. These materials offer better fatigue resistance, reduced friction, and increased efficiency, leading to longer service life and improved overall performance.
- Enhanced Tooth Profile Design: Innovations in tooth profile design have focused on optimizing the contact pattern, load distribution, and efficiency of worm wheels. Advanced computer-aided design (CAD) and simulation tools enable the modeling and analysis of complex tooth profiles, resulting in improved gear meshing and reduced losses. Modified tooth profiles, such as helical or curved teeth, are being employed to minimize sliding friction, increase tooth engagement, and enhance overall efficiency.
- Surface Treatments and Coatings: Surface treatments and coatings are being used to improve the wear resistance, reduce friction, and enhance the performance of worm wheels. Technologies such as nitriding, carburizing, and diamond-like carbon (DLC) coatings are applied to the gear surfaces to increase hardness, reduce friction, and minimize wear. These treatments and coatings improve the efficiency and extend the lifespan of worm wheels, particularly in demanding applications with high loads or harsh operating conditions.
- Advanced Manufacturing Techniques: Innovations in manufacturing techniques have enabled the production of worm wheels with higher precision, tighter tolerances, and improved surface finishes. Technologies such as computer numerical control (CNC) machining, 3D printing, and advanced grinding methods allow for the production of complex geometries and accurate tooth profiles. These advancements result in better gear meshing, reduced noise, improved efficiency, and enhanced overall performance of worm wheel systems.
- Integrated Lubrication Systems: Integrated lubrication systems have been developed to optimize the lubrication process and improve the efficiency of worm wheels. These systems use precise oil delivery mechanisms, such as micro-pumps or spray nozzles, to deliver lubricant directly to the meshing surfaces. The controlled and targeted lubrication ensures proper lubricant film formation, reduces frictional losses, and minimizes wear. Integrated lubrication systems also help to maintain consistent lubricant quality and reduce the need for manual lubrication maintenance.
- Smart Monitoring and Predictive Maintenance: Advancements in sensor technology, data analytics, and connectivity have facilitated the implementation of smart monitoring and predictive maintenance strategies for worm wheel systems. Sensors embedded in the gear assembly can collect real-time data on parameters such as temperature, vibration, or load. This data is then analyzed using machine learning algorithms to detect anomalies, predict potential failures, and optimize maintenance schedules. Smart monitoring and predictive maintenance help to maximize uptime, reduce downtime, and improve the overall reliability and efficiency of worm wheel systems.
These recent innovations and advancements in worm wheel technology have resulted in improved performance, efficiency, durability, and reliability of worm wheel systems. Continued research and development in this field are expected to drive further advancements and expand the capabilities of worm wheel technology in various applications.
editor by CX 2024-04-03
China Hot selling Casting Bronze Worm and Worm Gear for Worm Gearbox
Product Description
1, production technology: Sand casting, die casting. Machining,forging,stamping, welding,injection molding,assembelyp
2,Material: Aluminum,brass,stainless steel, carbon steel, grey iron,plastic ,rubber,
3, single process, high precision, little surface roughness,
4, customized, we produce the parts according to drawings or samples,
5, we will inspect the parts strictly and provide material and inspection report.
Packing and Shipping
1. Standard: crate
2. Delivery: As per contract delivery on time
3. Shipping: As per client request.
Our advantages
1.We can control the products to meet your strict requirement.
2. Different kinds of finish available, like anodized, power coating, painting, polishing, electrophoresis, plating. Etc.
3. Different dimensions according to the requirements
4. Can provide various sizes and packing according to specific requirements
5. We offer the engineer consultation to your design for production improvement and cost saving
Our Service:
1.Your inquiry related to our products or prices will be replied in 24 hours.
2.Individual formula according to customers’ special drawing requests.
3.Manufacturer with large capacity,ensures the fast production cycle after
confirming the order.
4.Protection of sales area and private information for all of our customers.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Condition: | New |
---|---|
Certification: | CE, GS, ISO9001 |
Standard: | DIN, ASTM, GOST, GB, JIS, ANSI, BS |
Customized: | Customized |
Material: | Alloy |
Application: | Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery |
Samples: |
US$ 2/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
|
|
---|
What role do worm wheels play in controlling speed and torque in mechanical assemblies?
Worm wheels play a crucial role in controlling speed and torque in mechanical assemblies. Here’s a detailed explanation of how worm wheels contribute to speed and torque control:
- Gear Reduction: One of the primary functions of worm wheels is to provide gear reduction. The helical teeth of the worm gear engage with the teeth of the worm wheel, resulting in a rotational output that is slower than the input speed. The gear reduction ratio is determined by the number of threads on the worm wheel and the pitch diameter of the gear. By controlling the gear reduction ratio, worm wheels enable precise speed control in mechanical assemblies.
- Speed Control: Worm wheels allow for fine control of rotational speed in mechanical assemblies. The high gear reduction ratio achievable with worm wheels enables slower output speeds, making them suitable for applications that require precise speed regulation. By adjusting the number of threads on the worm wheel or the pitch diameter of the gear, the speed output can be precisely controlled to match the requirements of the application.
- Torque Amplification: Worm wheels are capable of amplifying torque in mechanical assemblies. The helical tooth engagement between the worm gear and the worm wheel creates a mechanical advantage, resulting in increased torque at the output. This torque amplification allows worm wheels to transmit higher torque levels while maintaining a compact design. The ability to control torque amplification makes worm wheels suitable for applications that require high torque output, such as lifting mechanisms, conveyors, or heavy machinery.
- Torque Limiting: Worm wheels also provide torque limiting capabilities in mechanical assemblies. The self-locking nature of the worm wheel prevents reverse motion or backdriving from the output side to the input side. This self-locking property acts as a torque limiter, restricting excessive torque transmission and protecting the system from overload or damage. The torque limiting feature of worm wheels ensures safe and controlled operation in applications where torque limitation is critical, such as safety mechanisms or overload protection devices.
- Directional Control: Worm wheels offer precise directional control in mechanical assemblies. The helical tooth engagement between the worm gear and the worm wheel allows for power transmission in a single direction. The self-locking property of the worm wheel prevents reverse motion, ensuring that the output shaft remains stationary when the input is not actively driving it. This directional control is beneficial in applications that require precise positioning or unidirectional motion, such as indexing mechanisms or robotic systems.
- Load Distribution: Worm wheels play a role in distributing the load in mechanical assemblies. The sliding action between the worm gear and the worm wheel creates a larger contact area compared to other gear types. This increased contact area allows for better load distribution, minimizing stress concentration and ensuring even distribution of forces. By distributing the load effectively, worm wheels contribute to the longevity and reliability of mechanical assemblies.
Overall, worm wheels provide precise speed control, torque amplification, torque limiting, directional control, and load distribution capabilities in mechanical assemblies. These features make worm wheels versatile components that are widely used in various applications where precise control, torque management, and reliable performance are essential.
How do worm wheels contribute to the adaptability and versatility of mechanical systems in different settings?
Worm wheels play a significant role in enhancing the adaptability and versatility of mechanical systems across various settings. Here’s a detailed explanation of how worm wheels contribute to these aspects:
- Variable Speed Ratios: Worm wheels allow for the transmission of motion between the worm and the wheel with variable speed ratios. By changing the number of teeth on the worm wheel or the pitch diameter of the worm, different speed ratios can be achieved. This flexibility in speed control enables mechanical systems to adapt to different operating conditions, accommodate varying load requirements, and provide the desired output speeds for specific applications.
- Directional Reversibility: One of the key advantages of worm wheels is their ability to transmit motion in both clockwise and counterclockwise directions. By reversing the direction of the worm’s rotation, the motion can be transmitted in the opposite direction through the worm wheel. This feature contributes to the adaptability of mechanical systems, allowing for bidirectional operation and versatility in various applications where reversible motion is required.
- Compact Design: Worm wheels offer a compact and space-efficient design due to their high gear ratio capabilities. The worm’s helical shape allows for a large reduction in speed within a relatively small package size. This compact design is advantageous in applications where space is limited or where a high gear reduction is required without occupying excessive space. The compactness of worm wheels enhances the adaptability of mechanical systems in diverse settings, including compact machinery, automotive applications, or tight spaces.
- High Torque Transmission: Worm wheels are known for their ability to transmit high torque. The sliding action between the worm and the worm wheel creates a large contact area, enabling efficient torque transfer. This high torque transmission capability makes worm wheels suitable for applications requiring high torque output, such as lifting mechanisms, conveyor systems, or heavy-duty machinery. The ability to handle high torque contributes to the versatility and adaptability of mechanical systems in different settings.
- Mechanical Advantage: Worm wheels provide a mechanical advantage by converting a small rotational input force into a larger rotational output force. This mechanical advantage is a result of the gear ratio between the worm and the worm wheel. It allows mechanical systems to generate higher output forces or torques than what is applied at the input. This feature is valuable in applications where increased force or torque amplification is required, enabling systems to adapt to varying load demands and perform tasks that would otherwise be challenging or impractical.
- Noise Reduction: Worm wheels are known for their quiet operation due to the sliding contact between the worm and the worm wheel teeth. This sliding action reduces the impact and noise associated with gear meshing compared to other types of gears, such as spur gears or bevel gears. The noise reduction capability of worm wheels makes them suitable for applications where noise control is important, such as in precision equipment, office machinery, or noise-sensitive environments. This contributes to the adaptability of mechanical systems in different settings that require low noise levels.
Overall, worm wheels contribute significantly to the adaptability and versatility of mechanical systems in diverse settings. Their variable speed ratios, directional reversibility, compact design, high torque transmission, mechanical advantage, and noise reduction capabilities enable them to meet specific requirements and perform a wide range of tasks in different applications.
How does the design of a worm wheel contribute to the efficiency of power transmission?
The design of a worm wheel plays a significant role in ensuring efficient power transmission in mechanical systems. The specific characteristics and features of the worm wheel design contribute to its efficiency. Here’s a detailed explanation of how the design of a worm wheel contributes to the efficiency of power transmission:
1. Helical Tooth Profile: The teeth of a worm wheel are cut in a helical pattern around its circumference. This helical tooth profile allows for a larger contact area between the worm gear and the worm wheel, distributing the load over multiple teeth. As a result, it reduces the stress on individual teeth and minimizes wear, leading to improved efficiency and longevity of the gear system.
2. Sliding Action: The interaction between the worm gear and the worm involves a sliding action. As the worm rotates, its threads engage with the helical teeth of the worm wheel, causing a sliding motion between the two components. This sliding action helps distribute the load and reduces the concentration of forces on specific points, minimizing friction and wear. Consequently, the sliding action contributes to smoother power transmission and improved overall efficiency.
3. Lubrication: Proper lubrication is essential for the efficient operation of a worm wheel. Lubricants reduce friction between the mating surfaces, minimizing energy losses due to heat and wear. The helical tooth profile and sliding action of the worm wheel allow for effective lubrication distribution along the gear teeth and the worm’s threads, ensuring smooth movement and reducing power losses due to friction.
4. Material Selection: The choice of materials for constructing the worm wheel can impact its efficiency. Materials with low friction coefficients and high wear resistance, such as hardened steel or bronze alloys, are often used to minimize friction losses and ensure long-lasting performance. Additionally, selecting materials with appropriate strength and hardness characteristics helps maintain the dimensional stability and integrity of the gear teeth, further enhancing the efficiency of power transmission.
5. Gear Geometry and Tooth Profile: The precise design of the teeth on the worm wheel contributes to efficient power transmission. Factors such as the tooth profile, pressure angle, tooth width, and backlash control impact the meshing and engagement between the worm gear and the worm wheel. Optimized gear geometry ensures proper load distribution, reduces tooth deflection, and minimizes power losses due to inefficient contact and meshing of the teeth.
6. Preloading and Backlash Control: Proper preloading and backlash control in the worm wheel system can improve its efficiency. Preloading refers to applying a controlled amount of force to eliminate any clearance or backlash between the worm gear and the worm wheel. This reduces vibrations, improves the contact between the teeth, and minimizes power losses associated with backlash. By ensuring a precise and tight meshing between the components, the efficiency of power transmission is enhanced.
7. Manufacturing Precision: The manufacturing precision of the worm wheel is crucial for its efficiency. Accurate machining and assembly processes are necessary to achieve the desired gear geometry, tooth profile, and dimensional tolerances. High manufacturing precision ensures proper alignment and meshing of the worm gear and the worm wheel, reducing unnecessary friction and power losses caused by misalignment or poor gear quality.
By incorporating these design considerations and optimizing the various aspects of worm wheel design, such as tooth profile, lubrication, materials, and manufacturing precision, the efficiency of power transmission can be maximized. This results in reduced energy losses, improved overall system performance, and extended gear life.
editor by CX 2024-04-03
China best Large Gearbox Transmission Customized Worm Gear and Worm High Quality Large Worm Gear and Shaft
Product Description
Key attributes
Other attributes
Applicable Industries
Energy & Mining
Weight (KG)
750
After Warranty Service
Video technical support, Online support
Local Service Location
None
Showroom Location
None
Video outgoing-inspection
Provided
Machinery Test Report
Provided
Marketing Type
Hot Product 2571
Warranty of core components
1 Year
Core Components
worm gear
Heavy transmission gear box custom casting drive large worm gear and shaft
Place of Origin
ZheJiang , China
Condition
New
Warranty
12Months
Shape
Worm
Brand Name
TS
Material
copper
Standard or Nonstandard
Nonstandard
Direction
OEM
Product name
custom casting drive large worm gear and shaft
Application
Heavy gear box
Quality
High Quailty
Tolerance
0.01mm
Diameter
Min:200mm
Color
OEM
Heat treatment
OEM
MOQ
1 Piece
Standard
ISO
Material
Copper
OUR WORKSHOPS
OUR EQUIPMENTS
Technology Process
Material |
Carbon steel,Alloy steel |
||
Structure |
Forging,casting |
||
Type of gear |
spur gear,helical gear,Planetary Gear |
||
Heat treatment |
Quenching and tempering |
||
Process |
forging, rough machining, QT, finish machining |
||
Main equipments |
hobbing,CNC machine |
||
Module |
up to 200 |
||
Precision of gear |
Grinding ISO Grade 5-7 & Hobbing ISO Grade 8-9 |
||
Inspection |
Raw material inspection, UT,physical property test,dimension inspect |
||
Application |
Mining machinery, mill, kiln and other equipment |
OUR CERTIFICATE
OUR CUSTOMER FEEDBACK
CONTACT
Application: | Industry |
---|---|
Hardness: | Hb190-Hb300 |
Gear Position: | External Gear |
Samples: |
US$ 100/Piece
1 Piece(Min.Order) | Order Sample |
---|
Customization: |
Available
|
|
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
How does the design of a worm wheel contribute to the efficiency of power transmission?
The design of a worm wheel plays a significant role in ensuring efficient power transmission in mechanical systems. The specific characteristics and features of the worm wheel design contribute to its efficiency. Here’s a detailed explanation of how the design of a worm wheel contributes to the efficiency of power transmission:
1. Helical Tooth Profile: The teeth of a worm wheel are cut in a helical pattern around its circumference. This helical tooth profile allows for a larger contact area between the worm gear and the worm wheel, distributing the load over multiple teeth. As a result, it reduces the stress on individual teeth and minimizes wear, leading to improved efficiency and longevity of the gear system.
2. Sliding Action: The interaction between the worm gear and the worm involves a sliding action. As the worm rotates, its threads engage with the helical teeth of the worm wheel, causing a sliding motion between the two components. This sliding action helps distribute the load and reduces the concentration of forces on specific points, minimizing friction and wear. Consequently, the sliding action contributes to smoother power transmission and improved overall efficiency.
3. Lubrication: Proper lubrication is essential for the efficient operation of a worm wheel. Lubricants reduce friction between the mating surfaces, minimizing energy losses due to heat and wear. The helical tooth profile and sliding action of the worm wheel allow for effective lubrication distribution along the gear teeth and the worm’s threads, ensuring smooth movement and reducing power losses due to friction.
4. Material Selection: The choice of materials for constructing the worm wheel can impact its efficiency. Materials with low friction coefficients and high wear resistance, such as hardened steel or bronze alloys, are often used to minimize friction losses and ensure long-lasting performance. Additionally, selecting materials with appropriate strength and hardness characteristics helps maintain the dimensional stability and integrity of the gear teeth, further enhancing the efficiency of power transmission.
5. Gear Geometry and Tooth Profile: The precise design of the teeth on the worm wheel contributes to efficient power transmission. Factors such as the tooth profile, pressure angle, tooth width, and backlash control impact the meshing and engagement between the worm gear and the worm wheel. Optimized gear geometry ensures proper load distribution, reduces tooth deflection, and minimizes power losses due to inefficient contact and meshing of the teeth.
6. Preloading and Backlash Control: Proper preloading and backlash control in the worm wheel system can improve its efficiency. Preloading refers to applying a controlled amount of force to eliminate any clearance or backlash between the worm gear and the worm wheel. This reduces vibrations, improves the contact between the teeth, and minimizes power losses associated with backlash. By ensuring a precise and tight meshing between the components, the efficiency of power transmission is enhanced.
7. Manufacturing Precision: The manufacturing precision of the worm wheel is crucial for its efficiency. Accurate machining and assembly processes are necessary to achieve the desired gear geometry, tooth profile, and dimensional tolerances. High manufacturing precision ensures proper alignment and meshing of the worm gear and the worm wheel, reducing unnecessary friction and power losses caused by misalignment or poor gear quality.
By incorporating these design considerations and optimizing the various aspects of worm wheel design, such as tooth profile, lubrication, materials, and manufacturing precision, the efficiency of power transmission can be maximized. This results in reduced energy losses, improved overall system performance, and extended gear life.
Can you explain the role of a worm wheel in conjunction with a worm gear?
In mechanical systems, a worm wheel and a worm gear work together to achieve the transmission of motion and power between two perpendicular shafts. The worm gear is a screw-like gear, while the worm wheel is a circular gear with teeth cut in a helical pattern. Here’s a detailed explanation of the role of a worm wheel in conjunction with a worm gear:
The primary function of a worm wheel and worm gear combination is to provide a compact and efficient means of transmitting rotational motion and power at a right angle. The interaction between the worm gear and the worm allows for high gear reduction ratios, making it suitable for applications that require large speed reductions and high torque output.
The worm gear, or worm, is a threaded shaft resembling a screw. It is the driving component of the system and is typically turned by a motor or other power source. The threads on the worm engage with the teeth of the worm wheel, causing the wheel to rotate.
The helical shape of the worm gear teeth and the orientation of the threads on the worm are designed to ensure smooth and efficient power transmission. As the worm rotates, the sliding action between the threads of the worm and the helical teeth of the worm wheel enables the transfer of motion.
The gear ratio between the worm and worm wheel determines the speed reduction and torque multiplication achieved. The number of teeth on the worm wheel compared to the number of threads on the worm determines the gear ratio. For example, a worm wheel with 40 teeth and a worm with one thread would result in a gear ratio of 40:1, meaning the output shaft of the worm wheel rotates once for every 40 rotations of the worm.
The key role of the worm wheel is to receive the rotational motion from the worm and transmit it to the output shaft. It converts the rotary motion of the worm into rotary motion in a different direction, typically at a right angle.
The worm wheel also provides mechanical advantage by multiplying the torque output. Due to the helical shape of the teeth, the sliding action between the worm and the worm wheel allows for a larger contact area and load distribution, resulting in increased torque output at the output shaft.
The combination of the worm gear and worm wheel offers several advantages in mechanical systems:
- High Gear Reduction: The worm gear and worm wheel enable significant speed reduction while increasing torque output, making them suitable for applications requiring high torque and low speed.
- Self-Locking: The friction between the worm gear and the worm prevents backdriving, allowing the worm wheel to maintain its position even when the driving force is removed.
- Compact Design: The perpendicular arrangement of the worm gear and worm wheel allows for a compact and space-saving design, making it advantageous in applications with limited space.
- Quiet Operation: The sliding action between the worm gear and worm wheel helps distribute the load over multiple teeth, resulting in smoother and quieter operation.
- Directional Control: The worm gear and worm wheel combination can provide unidirectional motion, preventing motion from the output side back to the input side due to their self-locking property.
Worm gear and worm wheel systems are commonly used in various applications, including automotive, industrial machinery, elevators, conveyor systems, and robotics. Their unique characteristics make them suitable for tasks that require precise control, high torque, and compact design.
It is important to note that proper lubrication, maintenance, and design considerations are crucial for ensuring the reliable and efficient operation of worm gear and worm wheel systems. Regular inspections and adherence to manufacturer guidelines are essential for maximizing the lifespan and performance of these components.
Can you provide examples of products or machinery that use worm wheels in their systems?
Yes, there are numerous products and machinery that utilize worm wheels as integral components in their systems. Here are some examples:
- Elevators: Worm wheels are commonly used in elevator systems to control the vertical movement of the elevator car. The high gear reduction ratio of the worm wheel allows for precise and controlled lifting and lowering of the elevator. The self-locking property of the worm wheel ensures that the elevator remains stationary at each floor, enhancing safety and stability.
- Conveyors: Conveyors, such as belt conveyors or screw conveyors, often incorporate worm wheels to drive the movement of the conveyor belt or screw. The gear reduction provided by the worm wheel allows for controlled and synchronized material handling in industries such as manufacturing, mining, and logistics.
- Automotive Applications: Worm wheels are utilized in various automotive applications. For example, power steering systems use worm wheels to convert the rotational motion of the steering wheel into the linear motion required for steering the vehicle. Additionally, some automotive seat adjustment mechanisms and convertible roof systems use worm wheels for precise positioning and control.
- Machine Tools: Worm wheels are found in machine tools like milling machines, lathes, and grinders. They are often used in the feed mechanisms to control the movement of the workpiece or cutting tool with high precision and accuracy. The high gear reduction ratio of the worm wheel enables fine adjustments of the feed rate and ensures stable and controlled machining operations.
- Robotics: Worm wheels are employed in various robotic systems for precise motion control. They can be found in robotic arms, grippers, and joints, allowing for accurate positioning and movement. The self-locking property of the worm wheel ensures that the robot maintains its position when not actively driven, providing stability and safety in robotic applications.
- Positioning Systems: Precision positioning systems, such as linear stages or rotary stages, utilize worm wheels to achieve accurate and repeatable motion. These systems are commonly used in semiconductor manufacturing, optics, microscopy, and other industries where precise positioning is critical. Worm wheels provide the necessary gear reduction and precise control required for precise positioning applications.
- Gate Operators: Worm wheels are employed in gate operator systems to control the opening and closing of gates, such as in residential or commercial gate automation. The gear reduction provided by the worm wheel allows for controlled and smooth operation of the gate, ensuring security and convenience.
- Industrial Mixers: Worm wheels are used in industrial mixers and agitators to control the rotational speed and torque applied to the mixing blades. The gear reduction ratio of the worm wheel enables precise control of the mixing process, ensuring efficient and consistent mixing of various substances in industries like chemical processing and food production.
These examples illustrate the wide range of applications where worm wheels are utilized to provide precise motion control, torque management, and reliable performance. Their versatility and ability to control speed, torque, and direction make them valuable components in various products and machinery.
editor by CX 2023-12-04
China Best Sales Precision Transmission System Parts Gearbox OEM Worm Gear Spur Gear Helical Gear
Product Description
1) According to the different strength and performance, we choose the steel with strong compression;
2) Using Germany professional software and our professional engineers to design products with more reasonable size and better performance; 3) We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;
4) Quality assurance in every step to ensure product quality is controllable.
Product Paramenters
DRIVEN GEAR |
NUMBER OF TEETH |
10 |
MODULE |
12.35 | |
LENTH |
303 | |
OUTER DIAMETER |
ø175.2 |
|
DIRECTION OF SPIRAL |
L |
|
ACCURACY OF SPLINE |
M33*1.5-6h | |
NUMBER OF SPLINE |
42 |
DRIVEN GEAR |
NUMBER OF TEETH |
37 |
OUTER DIAMETER |
ø456.9 |
|
DIAMETER OF INNER HOLE |
ø260 |
|
ACCURACY OF SCREW |
12-M20*1.5-6H | |
CENTER DISTANCE OF SCREW HOLE |
ø340 |
|
DIRECTION OF SPIRAL |
R |
Company Profiles
Our company,HangZhou CHINAMFG Gear co.,Ltd , specialized in Hypoid and spiral bevel gear used in Automotive industry, was foundeded in 1996, with registered capital 136,8 square meter, with building area of 72,000 square meters. More than 500 employees work in our company.
We own more than 560 high-precise machining equipments, 10 Klingelnberg Oerlikon gear production lines, 36 Gleason gear production lines, 5 forging production lines 2 german Aichilin and 5 CHINAMFG CHINAMFG advanced automatic continuous heat treatment production lines. With the introducing the advanced Oerlikon C50 and P65 measuring center, we enhence our technology level and improve our product quality a lot. We offer better quality and good after-sale service with low price, which insure the good reputation. With the concept of “for the people, by technology, creativity, for the society, transfering friendship, honest”, we are trying to provice the world-top level product.
Our aim is: CHINAMFG Gear,world class, Drive the world.
According to the different strength and performance, we choose the steel with strong compression;Using Germany professional software and our professional engineers to design products with more reasonable size and better performance;We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;Quality assurance in every step to ensure product quality is controllable.
Our company had full quality management system and had been certified by ISO9001:2000, QS-9000:1998, ISO/TS16949 , which insure the entrance of international market.
Certification & honors
Packaging & Shipping
Packaging Detail:standard package(carton ,wooden pallet).
Shipping:Support Sea freight. Accept FOB,EXW,FAS,DES.
Cooperative customers
HangZhou CHINAMFG Gear Co., Ltd. adheres to the concept of “people-oriented, prosper with science and technology; create high-quality products, contribute to the society; turn friendship, and contribute sincerely”, and will strive to create world automotive axle spiral bevel gear products.
1.Do you provide samples?
Yes,we can offer free sample but not pay the cost of freight.
2.What about OEM?
Yes,we can do OEM according to your requirements.
3.How about after-sales service?
We have excellent after-sales service if you have any quanlity problem,you can contact us anytime.
4.What about package?
Stardard package or customized package as requirements.
5.How to ensure the quanlity of the products?
We can provide raw meterial report,metallographic examination and the accuracy testing etc.
6.How long is your delivery time?
Genarally it is 4-7 days.If customized it will be take 20 days according to your quantity.
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
---|---|
Hardness: | Hardened Tooth Surface |
Gear Position: | External Gear |
Manufacturing Method: | Cast Gear |
Toothed Portion Shape: | Herringbone Gear |
Material: | Cast Steel |
Samples: |
US$ 80/Set
1 Set(Min.Order) | |
---|
Customization: |
Available
|
|
---|
Can you provide insights into the importance of proper installation and alignment of worm wheels?
Proper installation and alignment of worm wheels are crucial for ensuring optimal performance, longevity, and efficiency of the gearing system. Here’s a detailed explanation of their importance:
- Load Distribution: Proper installation and alignment help in achieving the correct meshing and contact pattern between the worm and the worm wheel. This ensures that the load is distributed evenly across the teeth, minimizing localized stress concentrations. Misalignment or incorrect installation can lead to uneven load distribution, causing premature wear, tooth breakage, and reduced gear life.
- Reduced Friction and Wear: Correct alignment of the worm wheel is essential for minimizing sliding friction between the worm and the worm wheel. Improper alignment can result in increased friction, leading to higher energy losses, heat generation, and accelerated wear of the gear surfaces. Proper installation and alignment help to reduce friction and wear, improving the efficiency and longevity of the worm wheel system.
- Backlash and Efficiency: Backlash refers to the clearance between the teeth of the worm and the worm wheel. Proper installation and alignment help in minimizing backlash, ensuring tight and accurate meshing between the gear teeth. Excessive backlash can lead to reduced efficiency, decreased positional accuracy, and increased vibration or noise. By achieving proper alignment, backlash can be controlled within acceptable limits, optimizing the efficiency and performance of the worm wheel system.
- Stability and Noise: Correct installation and alignment contribute to the stability and smooth operation of the worm wheel system. Misalignment can introduce vibrations, noise, and undesirable oscillations during operation. Proper alignment minimizes these issues, promoting stable and quiet operation. This is particularly important in applications where noise reduction, precision, and smooth motion are critical, such as robotics, machine tools, or motion control systems.
- Mechanical Integrity: Proper installation and alignment help to maintain the overall mechanical integrity of the worm wheel system. Misalignment or incorrect installation can result in excessive forces, stresses, or deflections within the components, leading to structural failures or reduced system performance. By ensuring proper alignment, the mechanical integrity of the system is preserved, ensuring reliable and safe operation.
- System Performance: The overall performance of the worm wheel system is directly influenced by proper installation and alignment. Correct alignment ensures accurate transmission of motion, precise positioning, and reliable torque transfer. It helps to achieve the desired speed ratios, torque ratios, and positional accuracy required for the specific application. Proper installation and alignment contribute to the overall efficiency, reliability, and performance of the worm wheel system.
In summary, proper installation and alignment of worm wheels are vital for achieving optimal performance, longevity, and efficiency of the gearing system. They help to distribute the load evenly, reduce friction and wear, minimize backlash, promote stability and smooth operation, preserve mechanical integrity, and ensure desired system performance. Adhering to recommended installation procedures and alignment tolerances is crucial to maximize the benefits and capabilities of worm wheel systems.
How does the design of a worm wheel contribute to the efficiency of power transmission?
The design of a worm wheel plays a significant role in ensuring efficient power transmission in mechanical systems. The specific characteristics and features of the worm wheel design contribute to its efficiency. Here’s a detailed explanation of how the design of a worm wheel contributes to the efficiency of power transmission:
1. Helical Tooth Profile: The teeth of a worm wheel are cut in a helical pattern around its circumference. This helical tooth profile allows for a larger contact area between the worm gear and the worm wheel, distributing the load over multiple teeth. As a result, it reduces the stress on individual teeth and minimizes wear, leading to improved efficiency and longevity of the gear system.
2. Sliding Action: The interaction between the worm gear and the worm involves a sliding action. As the worm rotates, its threads engage with the helical teeth of the worm wheel, causing a sliding motion between the two components. This sliding action helps distribute the load and reduces the concentration of forces on specific points, minimizing friction and wear. Consequently, the sliding action contributes to smoother power transmission and improved overall efficiency.
3. Lubrication: Proper lubrication is essential for the efficient operation of a worm wheel. Lubricants reduce friction between the mating surfaces, minimizing energy losses due to heat and wear. The helical tooth profile and sliding action of the worm wheel allow for effective lubrication distribution along the gear teeth and the worm’s threads, ensuring smooth movement and reducing power losses due to friction.
4. Material Selection: The choice of materials for constructing the worm wheel can impact its efficiency. Materials with low friction coefficients and high wear resistance, such as hardened steel or bronze alloys, are often used to minimize friction losses and ensure long-lasting performance. Additionally, selecting materials with appropriate strength and hardness characteristics helps maintain the dimensional stability and integrity of the gear teeth, further enhancing the efficiency of power transmission.
5. Gear Geometry and Tooth Profile: The precise design of the teeth on the worm wheel contributes to efficient power transmission. Factors such as the tooth profile, pressure angle, tooth width, and backlash control impact the meshing and engagement between the worm gear and the worm wheel. Optimized gear geometry ensures proper load distribution, reduces tooth deflection, and minimizes power losses due to inefficient contact and meshing of the teeth.
6. Preloading and Backlash Control: Proper preloading and backlash control in the worm wheel system can improve its efficiency. Preloading refers to applying a controlled amount of force to eliminate any clearance or backlash between the worm gear and the worm wheel. This reduces vibrations, improves the contact between the teeth, and minimizes power losses associated with backlash. By ensuring a precise and tight meshing between the components, the efficiency of power transmission is enhanced.
7. Manufacturing Precision: The manufacturing precision of the worm wheel is crucial for its efficiency. Accurate machining and assembly processes are necessary to achieve the desired gear geometry, tooth profile, and dimensional tolerances. High manufacturing precision ensures proper alignment and meshing of the worm gear and the worm wheel, reducing unnecessary friction and power losses caused by misalignment or poor gear quality.
By incorporating these design considerations and optimizing the various aspects of worm wheel design, such as tooth profile, lubrication, materials, and manufacturing precision, the efficiency of power transmission can be maximized. This results in reduced energy losses, improved overall system performance, and extended gear life.
How do worm wheels contribute to the precision and accuracy of motion in machinery?
Worm wheels play a significant role in achieving precision and accuracy of motion in machinery. Here’s a detailed explanation of how worm wheels contribute to precision and accuracy:
- Reduced Backlash: Backlash refers to the amount of clearance or play between meshing gears, which can result in undesired movement or positioning errors. Worm wheels have a self-locking mechanism that minimizes or eliminates backlash. The helical teeth of the worm wheel engage with the worm gear at an angle, creating a wedging effect that prevents reverse motion. This inherent self-locking property ensures precise positioning and eliminates backlash, contributing to the overall precision of motion.
- High Gear Reduction Ratio: Worm wheels offer high gear reduction ratios, allowing for fine control and precise motion. The helical shape of the worm gear teeth and the interaction with the worm wheel enable gear ratios ranging from 5:1 to 100:1 or even higher. This high reduction ratio allows for slower rotational output and finer increments of motion, enhancing precision in applications that require precise positioning or control.
- Single Directional Control: Worm wheels provide excellent directional control, allowing power transmission in a single direction only. The self-locking nature of the worm wheel prevents any reverse motion from the output side to the input side. This property is particularly beneficial in applications where precise and accurate motion in a specific direction is required, such as in robotics or CNC machinery.
- Smooth Operation: The helical tooth profile of the worm wheel contributes to smooth and quiet operation. The helical teeth engage gradually, resulting in a smooth transfer of power and reduced noise and vibration. This smooth operation is crucial for applications that require precise and accurate motion, as it helps minimize disturbances and ensure consistent movement without jarring or jerking.
- Increased Contact Area: The sliding action between the worm gear and the worm wheel creates a larger contact area compared to other gear types. The increased contact area allows for better load distribution and improved torque transmission. This helps to minimize tooth wear, enhance durability, and maintain the accuracy of motion over an extended period of operation.
- Compact Design: Worm wheels offer a compact design due to their perpendicular arrangement. The compactness allows for efficient use of space and integration into machinery with limited space constraints. The reduced size and weight contribute to improved stability and accuracy by minimizing flexing or bending that can occur in larger gear systems.
By incorporating worm wheels into machinery, engineers can achieve precise and accurate motion control, ensuring the desired positioning, repeatability, and overall performance of the system. These characteristics make worm wheels suitable for a wide range of applications that require high precision and accuracy, such as robotics, machine tools, positioning systems, and automation equipment.
editor by CX 2023-11-27
China Hot selling Steel Worm Gear with Machining for Gearbox Spare Parts
Product Description
1, production technology: Sand casting, die casting. Machining,forging,stamping, welding,injection molding,assembelyp
2,Material: Aluminum,brass,stainless steel, carbon steel, grey iron,plastic ,rubber,
3, single process, high precision, little surface roughness,
4, customized, we produce the parts according to drawings or samples,
5, we will inspect the parts strictly and provide material and inspection report.
Packing and Shipping
1. Standard: crate
2. Delivery: As per contract delivery on time
3. Shipping: As per client request.
Our advantages
1.We can control the products to meet your strict requirement.
2. Different kinds of finish available, like anodized, power coating, painting, polishing, electrophoresis, plating. Etc.
3. Different dimensions according to the requirements
4. Can provide various sizes and packing according to specific requirements
5. We offer the engineer consultation to your design for production improvement and cost saving
Our Service:
1.Your inquiry related to our products or prices will be replied in 24 hours.
2.Individual formula according to customers’ special drawing requests.
3.Manufacturer with large capacity,ensures the fast production cycle after
confirming the order.
4.Protection of sales area and private information for all of our customers.
Material available | Carbon steel, Stainless steel, spring steel, Bronze, brass, copper alloy, aluminum alloy, tinplate, nickel silver, plastic |
Surface treatment | Polishing\Spray Coating\Deburring\Electroplating\Oxygenation\Baking Paint\Grind\Oil CHINAMFG , etc. |
Manufacturing Methods |
Investment Casting, Die Casting, Sand Casting, Stamping, CNC Machining, Forging, |
Specification | OEM & Custom According to Drawing or Samples |
Package | Standard Export Carton/According to customer’ s requirement |
Application: | Motorcycle, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened |
Manufacturing Method: | Cast Gear |
Toothed Portion Shape: | Spur Gear |
Material: | Cast Iron |
Type: | Circular Gear |
Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
|
|
---|
Can you explain the impact of worm wheels on the overall efficiency of gearing systems?
Worm wheels have a significant impact on the overall efficiency of gearing systems. Here’s a detailed explanation of their influence:
- Gear Reduction: Worm wheels are known for their high gear reduction ratios, which means they can achieve significant speed reduction in a single stage. This is due to the large number of teeth on the worm wheel compared to the number of starts on the worm. The gear reduction capability of worm wheels allows for the transmission of high torque at low speeds. However, it’s important to note that the high gear reduction also leads to a trade-off in terms of efficiency.
- Inherent Efficiency Loss: Worm gears inherently introduce some efficiency loss due to the sliding action that occurs between the worm and the worm wheel. This sliding action generates friction, which results in energy losses and heat generation. Compared to other types of gears, such as spur gears or helical gears, worm gears typically have lower efficiency levels.
- Self-Locking Property: One unique characteristic of worm wheels is their self-locking property. When the worm wheel is not being actively driven, the friction generated between the worm and the worm wheel prevents the worm wheel from rotating backward. This self-locking feature provides stability and prevents the system from backdriving. However, it also contributes to the overall efficiency loss of the gearing system.
- Lubrication and Friction: Proper lubrication of worm wheels is crucial for reducing friction and improving their efficiency. Lubrication forms a thin film between the worm and the worm wheel, reducing direct metal-to-metal contact and minimizing frictional losses. Insufficient or improper lubrication can lead to increased friction, higher energy losses, and reduced efficiency. Therefore, maintaining appropriate lubrication levels is essential for optimizing the efficiency of worm gear systems.
- Design Factors: Several design factors can impact the efficiency of worm wheels. These include the tooth profile, helix angle, material selection, and manufacturing tolerances. The tooth profile and helix angle can influence the contact pattern and the distribution of loads, affecting efficiency. The choice of materials with low friction coefficients and good wear resistance can help improve efficiency. Additionally, maintaining tight manufacturing tolerances ensures proper meshing and reduces energy losses due to misalignment or backlash.
- Operating Conditions: The operating conditions, such as the applied load, speed, and temperature, can also affect the efficiency of worm wheels. Higher loads and speeds can lead to increased friction and energy losses, reducing efficiency. Elevated temperatures can cause lubricant degradation, increased viscosity, and higher friction, further impacting efficiency. Therefore, operating within the specified load and speed limits and maintaining suitable operating temperatures are essential for optimizing efficiency.
In summary, worm wheels have a notable impact on the overall efficiency of gearing systems. While they offer high gear reduction ratios and self-locking capabilities, they also introduce inherent efficiency losses due to friction and sliding action. Proper lubrication, suitable design considerations, and operating within specified limits are essential for maximizing the efficiency of worm gear systems.
What are the advantages of using a worm wheel in gearing systems?
Using a worm wheel in gearing systems offers several advantages, making it a popular choice for various applications. Here’s a detailed explanation of the advantages of using a worm wheel:
- High Gear Reduction: Worm wheels provide significant gear reduction ratios, allowing for large speed reductions and high torque output. The helical shape of the worm gear teeth and the interaction with the worm enable gear ratios ranging from 5:1 to 100:1 or even higher. This makes worm wheels suitable for applications that require high torque and low-speed operation.
- Compact Design: The perpendicular arrangement of the worm gear and the worm wheel allows for a compact design, making efficient use of space. This is especially beneficial in applications where space is limited or where a compact and lightweight design is desired.
- Self-Locking: One of the unique properties of a worm wheel system is its inherent self-locking ability. Due to the sliding action and the angle of the helical teeth, the worm wheel can hold its position and prevent backdriving. This means that even when the driving force is removed, the worm wheel remains locked in place, enhancing safety and stability in applications where position holding is critical.
- High Torque Capability: The sliding action and increased tooth engagement of the worm wheel design allow for a larger contact area between the worm gear and the worm wheel. This results in higher torque transmission capacity compared to other gear types, making worm wheels suitable for applications requiring high torque output.
- Quiet Operation: The sliding action between the worm gear and the worm wheel results in smoother and quieter operation compared to other gear types. The helical teeth of the worm wheel help distribute the load over multiple teeth, reducing noise and vibration, and providing a smoother transmission of power.
- Directional Control: Worm wheels offer excellent directional control, allowing power transmission in a single direction only. The self-locking nature of the worm wheel prevents any reverse motion from the output side to the input side. This property is advantageous in applications where precise motion control and prevention of backward movement are required.
- Efficient Power Transmission: The sliding action, larger contact area, and self-locking nature of the worm wheel design contribute to efficient power transmission. The reduced friction and wear, along with the optimized tooth engagement, help minimize energy losses, improve overall system efficiency, and reduce the need for frequent maintenance.
- Versatility: Worm wheels can be manufactured in various sizes, materials, and configurations to suit different application requirements. They can be customized to meet specific torque, speed, and space constraints, making them versatile for a wide range of applications across industries.
These advantages make worm wheels suitable for a variety of applications, including automotive, industrial machinery, elevators, robotics, and more. However, it’s important to consider factors such as lubrication, proper gear meshing, and maintenance to ensure the reliable and efficient operation of worm wheel systems.
How do worm wheels contribute to the adaptability and versatility of mechanical systems in different settings?
Worm wheels play a significant role in enhancing the adaptability and versatility of mechanical systems across various settings. Here’s a detailed explanation of how worm wheels contribute to these aspects:
- Variable Speed Ratios: Worm wheels allow for the transmission of motion between the worm and the wheel with variable speed ratios. By changing the number of teeth on the worm wheel or the pitch diameter of the worm, different speed ratios can be achieved. This flexibility in speed control enables mechanical systems to adapt to different operating conditions, accommodate varying load requirements, and provide the desired output speeds for specific applications.
- Directional Reversibility: One of the key advantages of worm wheels is their ability to transmit motion in both clockwise and counterclockwise directions. By reversing the direction of the worm’s rotation, the motion can be transmitted in the opposite direction through the worm wheel. This feature contributes to the adaptability of mechanical systems, allowing for bidirectional operation and versatility in various applications where reversible motion is required.
- Compact Design: Worm wheels offer a compact and space-efficient design due to their high gear ratio capabilities. The worm’s helical shape allows for a large reduction in speed within a relatively small package size. This compact design is advantageous in applications where space is limited or where a high gear reduction is required without occupying excessive space. The compactness of worm wheels enhances the adaptability of mechanical systems in diverse settings, including compact machinery, automotive applications, or tight spaces.
- High Torque Transmission: Worm wheels are known for their ability to transmit high torque. The sliding action between the worm and the worm wheel creates a large contact area, enabling efficient torque transfer. This high torque transmission capability makes worm wheels suitable for applications requiring high torque output, such as lifting mechanisms, conveyor systems, or heavy-duty machinery. The ability to handle high torque contributes to the versatility and adaptability of mechanical systems in different settings.
- Mechanical Advantage: Worm wheels provide a mechanical advantage by converting a small rotational input force into a larger rotational output force. This mechanical advantage is a result of the gear ratio between the worm and the worm wheel. It allows mechanical systems to generate higher output forces or torques than what is applied at the input. This feature is valuable in applications where increased force or torque amplification is required, enabling systems to adapt to varying load demands and perform tasks that would otherwise be challenging or impractical.
- Noise Reduction: Worm wheels are known for their quiet operation due to the sliding contact between the worm and the worm wheel teeth. This sliding action reduces the impact and noise associated with gear meshing compared to other types of gears, such as spur gears or bevel gears. The noise reduction capability of worm wheels makes them suitable for applications where noise control is important, such as in precision equipment, office machinery, or noise-sensitive environments. This contributes to the adaptability of mechanical systems in different settings that require low noise levels.
Overall, worm wheels contribute significantly to the adaptability and versatility of mechanical systems in diverse settings. Their variable speed ratios, directional reversibility, compact design, high torque transmission, mechanical advantage, and noise reduction capabilities enable them to meet specific requirements and perform a wide range of tasks in different applications.
editor by CX 2023-11-27
China 300W gear motor 220V electric ac worm gearbox motor Right Angle AC Motor with NMRV050 compact worm gearbox
Guarantee: 3months-1year
Product Quantity: NMRV050
Variety: Equipment MOTOR
Frequency: 50Hz/60Hz
Phase: Solitary-phase
Protect Function: Waterproof
AC Voltage: 110V 220V 380V
Efficiency: IE two
Customization: Suitable
Materials: Aluminium Alloy+metal
Electricity: 250-750W
Worm product: NMRV050
Voltage: a hundred and ten/220V
Service: customizable
Excess weight: 4kg
Certification: ce
Packaging Details: 1.Outer packing: Standard export carton with necessary delivery marks2.Inner packing: Watertight packing with shock absorbing EPE and cardboard surrounded3.As per the clientele requirements
Merchandise Specification 300W gear motor 220V electrical ac worm gearbox motor Right Angle AC Motor with NMRV050
There are a lot of kinds of worm gearboxes. If you have any queries about the selection, you should get in touch with us very first. | ||
Band title | Lunyee | |
Model No.: | NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150 | |
Ratio: | 5,7.5,10,fifteen, MTB Bicycle 8S Cassette freewheel eleven-40T ratchet wheel Steel Thread Sprocket Cassette Sprockets Bicycle twenty,25,30,forty,fifty, 60, eighty, a hundred | |
Color: | Blue/Silver Grey Or On Consumer Ask for | |
Material: | Housing: Dimensions 25-a hundred and ten Is Aluminum Alloy, Dimensions one hundred ten-one hundred fifty Is Cast-Iron | |
Worm Wheel: ZCuSn10Pb1 | ||
Worm:20Cr | ||
Pinion:Tin Bronze | ||
Output Shaft: Metal-45# | ||
Matching motor | 40~750W | |
Usages: | Industrial Device: Meals Things, Ceramics, Chemical, Packing, Dyeing,Wood doing work, V-sort Sprocket Steel Market Set up pipe wrapped with polyurethane O Grooved pulley roller travel roller gravity conveyor Glass. | |
IEC Flange: | IEC Normal Flange Or On Consumer Ask for |
What is a worm gear reducer gearbox?
A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
Hollow shaft worm gear reducer gearbox
The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.
Double throat worm gear
Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
Self-locking function
One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.
Heat generated by worm gears
Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
Size of worm gear reducer gearbox
Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.
editor by Cx 2023-07-04