Product Description
This is our new product,servo motor,it is used in AGV vehicle,Robot driving system, tracked cars.Motor power up to 200w/500W/800W/1000W/1.5kw(2hp).volt is 48V,speed is 1500r/min.
1.Protection grade:IP65, insulation grade:F
2.Winding overhang structure optimization, to minimize the copper loss and iron loss minimization, small volume, light weight, low temperature rise, high efficiency
3.Super high coercivity, the maximum magnetic energy product NdFe35 permanent magnetic materials, strong resistance to demagnetization, motor performance is stable.
4.Low noise, low vibration, low moment of inertia.
5.High torque, fast dynamic response, wide speed range, strong overload capacity (four times)
1.Product Features:
| a. Protection grade:IP55, insulation grade:F |
| b. Winding overhang structure optimization, to minimize the copper loss and iron loss minimization, small volume, light weight, low temperature rise, high efficiency |
| c. Super high coercivity, the maximum magnetic energy product NdFe35 permanent magnetic materials, strong resistance to demagnetization, motor performance is stable. |
| d. Low noise, low vibration, low moment of inertia. |
| e. High torque, fast dynamic response, wide speed range, strong overload capacity (four times) |
2.Features:
|
1)High Torque to inertia ratio&up to 15000Nm/kgm² |
|
2)Fast dynamic response *time constant <20ms |
|
3)Wide speed adjusting&feedback up to 1000:1 |
|
4)Steady speed precision up to 0.5% |
|
5)High overload,2Mn/30s,3.5N.m/10s |
|
6)Small volume and light |
|
7)Silent,the lowest noise is only 45dB(A) |
|
8)Protected with IP55,Class F insulation |
3.Industry class:
a. The altitude should be over 1000 CHINAMFG above sea level
b. Environment temperature:-25ºC~+50ºC
c. The month average tallest relative humidity is 90%,at the same the month average lowest temperature is less than 25ºC
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Operating Speed: | Adjust Speed |
| Excitation Mode: | Excited |
| Function: | Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 10 |
| Customization: |
Available
|
|
|---|
Can you describe the various types and configurations of worm wheels available?
There are several types and configurations of worm wheels available to suit different applications and requirements. Here’s a description of the various types and configurations:
- Single-Threaded Worm Wheel: This is the most common type of worm wheel configuration. It has a single thread on its circumference that meshes with the worm gear. Single-threaded worm wheels provide a high gear reduction ratio and are used in applications where high torque and low-speed operation are required.
- Double-Threaded Worm Wheel: Double-threaded worm wheels have two threads on their circumference, which results in increased contact area and improved load distribution. This configuration allows for higher torque transmission capacity and smoother operation. Double-threaded worm wheels are utilized in applications that require even higher torque output and improved efficiency.
- Non-Cylindrical Worm Wheel: In some cases, the worm wheel may have a non-cylindrical shape. For example, it can have a concave or convex profile. Non-cylindrical worm wheels are used in specific applications where the shape is designed to accommodate unique requirements such as increased contact area, improved load distribution, or specialized motion control.
- Enveloping Worm Wheel: Enveloping worm wheels have specialized tooth profiles that provide increased contact area and improved load-carrying capacity. The teeth of the worm wheel wrap around the helical threads of the worm gear, resulting in enhanced meshing and load distribution. Enveloping worm wheels are typically used in high-load applications that require superior torque transmission and durability.
- Hypoid Worm Wheel: Hypoid worm wheels are designed with a hypoid offset, meaning that the centerline of the worm gear is offset from the centerline of the worm wheel. This configuration allows for smoother meshing and increased contact area, leading to improved load distribution and reduced wear. Hypoid worm wheels are often utilized in applications that require high torque, compact design, and smooth operation.
- Materials: Worm wheels can be made from a variety of materials depending on the application requirements. Common materials include steel, bronze, brass, and specialized alloys. Steel worm wheels offer high strength and durability, while bronze and brass worm wheels provide excellent wear resistance and self-lubricating properties. The choice of material depends on factors such as load capacity, operating conditions, and cost considerations.
These are some of the types and configurations of worm wheels available. The selection of a particular type depends on the specific application requirements, including torque, speed, load capacity, space constraints, and desired efficiency. It’s important to consider factors such as tooth profile, material selection, and manufacturing precision to ensure the reliable and efficient operation of the worm wheel in a given application.
Can you provide examples of products or machinery that use worm wheels in their systems?
Yes, there are numerous products and machinery that utilize worm wheels as integral components in their systems. Here are some examples:
- Elevators: Worm wheels are commonly used in elevator systems to control the vertical movement of the elevator car. The high gear reduction ratio of the worm wheel allows for precise and controlled lifting and lowering of the elevator. The self-locking property of the worm wheel ensures that the elevator remains stationary at each floor, enhancing safety and stability.
- Conveyors: Conveyors, such as belt conveyors or screw conveyors, often incorporate worm wheels to drive the movement of the conveyor belt or screw. The gear reduction provided by the worm wheel allows for controlled and synchronized material handling in industries such as manufacturing, mining, and logistics.
- Automotive Applications: Worm wheels are utilized in various automotive applications. For example, power steering systems use worm wheels to convert the rotational motion of the steering wheel into the linear motion required for steering the vehicle. Additionally, some automotive seat adjustment mechanisms and convertible roof systems use worm wheels for precise positioning and control.
- Machine Tools: Worm wheels are found in machine tools like milling machines, lathes, and grinders. They are often used in the feed mechanisms to control the movement of the workpiece or cutting tool with high precision and accuracy. The high gear reduction ratio of the worm wheel enables fine adjustments of the feed rate and ensures stable and controlled machining operations.
- Robotics: Worm wheels are employed in various robotic systems for precise motion control. They can be found in robotic arms, grippers, and joints, allowing for accurate positioning and movement. The self-locking property of the worm wheel ensures that the robot maintains its position when not actively driven, providing stability and safety in robotic applications.
- Positioning Systems: Precision positioning systems, such as linear stages or rotary stages, utilize worm wheels to achieve accurate and repeatable motion. These systems are commonly used in semiconductor manufacturing, optics, microscopy, and other industries where precise positioning is critical. Worm wheels provide the necessary gear reduction and precise control required for precise positioning applications.
- Gate Operators: Worm wheels are employed in gate operator systems to control the opening and closing of gates, such as in residential or commercial gate automation. The gear reduction provided by the worm wheel allows for controlled and smooth operation of the gate, ensuring security and convenience.
- Industrial Mixers: Worm wheels are used in industrial mixers and agitators to control the rotational speed and torque applied to the mixing blades. The gear reduction ratio of the worm wheel enables precise control of the mixing process, ensuring efficient and consistent mixing of various substances in industries like chemical processing and food production.
These examples illustrate the wide range of applications where worm wheels are utilized to provide precise motion control, torque management, and reliable performance. Their versatility and ability to control speed, torque, and direction make them valuable components in various products and machinery.
In what industries or applications are worm wheels commonly utilized?
Worm wheels, in conjunction with worm gears, find wide applications across various industries that require precise motion control, high torque, and compact design. Here’s a detailed explanation of the industries and applications where worm wheels are commonly utilized:
1. Automotive Industry: Worm wheels are used in automotive applications, such as power steering systems. They provide the necessary gear reduction to convert the rotational motion from the steering wheel into the appropriate steering force, enabling smooth and responsive steering control.
2. Industrial Machinery: Worm wheels are widely employed in various industrial machinery applications, including machine tools, conveyors, packaging machines, and material handling equipment. They provide reliable and efficient power transmission, enabling precise control of speed and torque in these systems.
3. Elevators: Worm wheels play a vital role in elevator systems, where they are used in the elevator drive mechanism to control the movement of the elevator car. They provide the necessary gear reduction to ensure smooth and controlled vertical motion, along with the ability to hold the car in position when the power is removed.
4. Robotics: Worm wheels are commonly utilized in robotic systems, particularly in robot joints and manipulators. They allow for precise and controlled movement, enabling robots to perform intricate tasks with accuracy and repeatability.
5. Printing Presses: Printing presses often employ worm wheels in their drive systems. The worm gear and worm wheel combination helps in achieving the required gear reduction for controlling the paper feed and maintaining consistent print quality.
6. Conveyor Systems: Worm wheels are found in conveyor systems that require controlled and synchronized movement of goods or materials. They provide the necessary torque and gear reduction to ensure smooth and efficient operation of the conveyor belts or rollers.
7. Agriculture and Farming: Worm wheels are utilized in various agricultural machinery, such as tractor attachments, harvesting equipment, and irrigation systems. They facilitate the transmission of power and control the rotational motion required for specific farming operations.
8. Renewable Energy: Worm wheels are used in renewable energy applications, including wind turbines and solar tracking systems. They help in achieving the required gear reduction to optimize power generation and ensure efficient tracking of the sun or wind direction.
9. Food Processing: Worm wheels are employed in food processing equipment, such as mixers, grinders, and dough kneaders. They provide the necessary gear reduction and enable precise control of rotational speed for efficient food preparation and processing.
10. Medical Equipment: Worm wheels find applications in medical equipment, such as surgical robots, imaging devices, and patient positioning systems. They contribute to precise and controlled movements, enabling accurate medical procedures and patient care.
These are just a few examples of the industries and applications where worm wheels are commonly utilized. Their ability to provide high gear reduction, compact design, and reliable power transmission makes them suitable for a wide range of mechanical systems that require precise motion control and high torque output.
editor by Dream 2024-05-09
China manufacturer Highly Efficient Electric Motor Gear for Robotics 12 Volt 45mm High Torque
Product Description
Product Description
D45 Model Motor
This compact 45mm diameter motor, featuring a worm gear reducer box, is designed for efficiency and durability. Despite its small size and lightweight design, it offers high load torque, minimal noise, and a long lifespan. Perfect for applications like automatic table and chair lifting, as well as automatic curtains.
Key Features:
- 45mm diameter motor
- Worm gear reducer box
- High load torque
- Low noise
- Long service life
Manufacturer Information:
Product Description:
Introducing the Auto Smart Electric Motor Gear 45mm by HangZhou Xihu (West Lake) Dis. Motor Co., Ltd.
The Auto Smart Electric Motor Gear 45mm is a compact and efficient speed reducer designed for industrial applications. This customizable gear offers smooth operation and a durable design, making it ideal for a wide range of industrial settings.
| Model | Voltage
Unit: VDC |
No load speed
Unit: rpm |
Noload current
Unit: mA |
Stall torque
Unit: kg.cm |
Gear ratio |
| D45-40 | 12V | 150 rpm | 60mA | 6.4 kg.cm | 40:1 |
| D45-65 | 12V | 90 rpm | 60mA | 10 kg.cm | 65:1 |
| D45-150 | 12V | 40 rpm | 60mA | 24 kg.cm | 150:1 |
| D45-200 | 12V | 30 rpm | 60mA | 25 kg.cm | 200:1 |
| D45-260 | 12V | 23 rpm | 60mA | 25 kg.cm | 260:1 |
| D45-340 | 12V | 18 rpm | 60mA | 25kg.cm | 340:1 |
| D45-600 | 12V | 10 rpm | 60mA | 25 kg.cm | 600:1 |
| D45-1000 | 12V | 6 rpm | 60mA | 25kg.cm | 1000:1 |
D52 Electric Motor for Household Appliances
This D52 electric motor, manufactured by HangZhou Xihu (West Lake) Dis. Motor Co., Ltd., is perfect for a variety of household appliances like electric drying racks, ice breakers, lifting tables, and mechanical equipment. Its compact size, high torque, and easy installation make it a versatile choice for your needs. Additionally, the output shaft size can be customized to meet your specific requirements.
Features:
- Small size
- Large torque
- Easy to install
Customizable output shaft size
| Products Type | Voltage | Power | No Load | Load | Gear ratio | Motor length | |||
| Speed | Current | Speed | Current | Torque | |||||
| VDC | W | RPM | A | RPM | A | N.M | mm | ||
| D52R-2440-270 | 24 | 40 | 270±20 | ≤0.8 | 200±20 | ≤4.5 | ≥1.5 | 2:34 | 64 |
| D52R-2430-110 | 24 | 30 | 110±10 | ≤0.8 | 75±5 | ≤4.0 | ≥3.5 | 1:45 | 64 |
| D52R-2415-55 | 24 | 15 | 55±5 | ≤0.8 | 38±5 | ≤3.0 | ≥3.0 | 1:51 | 64 |
| Remarks |
|||||||||
Detailed Photos
Product Parameters
52mm Worm Gear Motor with Encoder
Introducing the efficient BLDC gear motor from HangZhou Xihu (West Lake) Dis. Motor Co., Ltd. This motor is designed for industrial use, providing quiet, durable, and powerful performance. With a customizable speed reducer, this motor is perfect for a wide range of versatile applications.
Introducing our Encoder Equipped 52mm Worm Gear Motor
A compact and efficient BLDC gear motor designed for versatile industrial applications. Manufactured by HangZhou Xihu (West Lake) Dis. Motor Co., Ltd., this motor features a customizable speed reducer that delivers durable and powerful performance.
Certifications
Packaging & Shipping
Installation Instructions
Company Profile
Welcome to HangZhou Xihu (West Lake) Dis. Motor Co., Ltd.
Specializing in AC and DC motors for various applications such as kitchen appliances, air flow products, and more. With 16 years of experience, we provide quality motion solutions tailored to customer needs. Our offerings include superior customer service, high-quality products, innovative designs, and competitive prices. Compliant with EU and American standards, ensuring safety and social responsibility. Partner with us for your next project and experience CHINAMFG in motor solutions.
Introducing the Encoder Equipped 52mm Worm Gear Motor
by HangZhou Xihu (West Lake) Dis. Motor Co., Ltd.
A compact, efficient, and customizable motor designed for industrial applications. The Encoder Equipped 52mm Worm Gear Motor offers precision and reliability, making it ideal for a wide range of industrial uses.
Customer photo
FAQ
Q1. What about the payment way?
A1. By TT at sight or trade assurance. 30% down payment should be paid after contract is valid, 70% balance should be paid before shipment.
Q2. How long is the guarantee?
A2. We offer you high quality motors with 12 months guarantee and reply you as soon as possible within 5 hours.
Q3. If the motor some parts is broken 1 day, how can we get help from you?
A3. We will send you spare parts free of charge If they are in warranty, not including easy-broken parts. For easy-broken parts, we will only charge a cost fee.
Q4.How does your factory do regarding quality control?
A4.We have CE certificate and we have a special QC department in charge of products’ quality. If you also need other certificates, we also can help to apply.
Q5. What is your packaging?
A5. Our conventional packaging is: After doing the anti-rust treatment, wrap the plastic film around the machine and then fix the motor on the wooden bracket.
Q6. How can we check the motor before delivery?
A6. We can provide online checking when testing the motor on site. We will take and prepare detailed testing videos for your checking before the delivery. We accept third-party testing. Except above points,we will provide detailed testing report.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Universal, Industrial, Household Appliances, Car, Power Tools, DC Worm Gear Motor |
|---|---|
| Operating Speed: | Low Speed |
| Excitation Mode: | Excited |
| Function: | Driving |
| Casing Protection: | Open Type |
| Number of Poles: | 2 |
| Customization: |
Available
|
|
|---|
How do electronic or computer-controlled components integrate with worm wheels in modern applications?
In modern applications, electronic or computer-controlled components play a vital role in integrating with worm wheels. Here’s a detailed explanation of how these components integrate:
- Sensor Feedback: Electronic sensors can be integrated with worm wheels to provide feedback on various parameters such as position, speed, torque, and temperature. These sensors can detect the rotational position of the worm wheel, monitor the speed of rotation, measure the torque applied, and monitor the temperature of the system. The sensor data can be processed by a computer-controlled system to optimize performance, ensure safety, and enable precise control of the worm wheel system.
- Control Algorithms: Computer-controlled components allow for precise control algorithms to be implemented in worm wheel systems. These algorithms can optimize the operation of the worm wheel by adjusting parameters such as speed, torque, or position based on real-time sensor feedback. By analyzing the sensor data and applying control algorithms, the computer-controlled components can ensure efficient and accurate operation of the worm wheel system in accordance with the desired performance requirements.
- Positioning and Motion Control: Computer-controlled components can enable advanced positioning and motion control capabilities in worm wheel systems. By integrating with the worm wheel, electronic components can precisely control the position and movement of the system. This is particularly useful in applications where precise positioning or synchronized motion is required, such as robotics, CNC machines, or automated systems. The computer-controlled components receive input commands, process them, and generate appropriate signals to control the worm wheel’s rotation and positioning.
- Monitoring and Diagnostics: Electronic components can facilitate real-time monitoring and diagnostics of worm wheel systems. By continuously monitoring parameters such as temperature, vibration, or load, the computer-controlled components can detect any abnormalities or potential issues in the system. This allows for proactive maintenance or troubleshooting actions to be taken, minimizing downtime and optimizing the performance and lifespan of the worm wheel. Additionally, the computer-controlled components can generate diagnostic reports, log data, and provide visual or remote alerts for timely intervention.
- Integration with Human-Machine Interfaces: Computer-controlled components can integrate with human-machine interfaces (HMIs) to provide a user-friendly and intuitive interface for interacting with the worm wheel systems. HMIs can include touchscreens, control panels, or software applications that allow operators or users to input commands, monitor system status, adjust parameters, and receive feedback. This integration enhances the usability, flexibility, and accessibility of worm wheel systems in various applications.
- Networking and Communication: Computer-controlled components can be integrated into networked systems, allowing for communication and coordination with other devices or systems. This integration enables seamless integration of the worm wheel into larger automated systems, production lines, or interconnected machinery. Networking and communication capabilities facilitate data exchange, synchronization, and coordination, enhancing overall system performance and enabling advanced functionalities.
By integrating electronic or computer-controlled components with worm wheels, modern applications can benefit from enhanced control, precision, monitoring, and communication capabilities. These advancements enable optimized performance, improved efficiency, and increased reliability in various industries and sectors.
How do electronic or computer-controlled components integrate with worm wheels in modern applications?
In modern applications, electronic or computer-controlled components play a vital role in integrating with worm wheels. Here’s a detailed explanation of how these components integrate:
- Sensor Feedback: Electronic sensors can be integrated with worm wheels to provide feedback on various parameters such as position, speed, torque, and temperature. These sensors can detect the rotational position of the worm wheel, monitor the speed of rotation, measure the torque applied, and monitor the temperature of the system. The sensor data can be processed by a computer-controlled system to optimize performance, ensure safety, and enable precise control of the worm wheel system.
- Control Algorithms: Computer-controlled components allow for precise control algorithms to be implemented in worm wheel systems. These algorithms can optimize the operation of the worm wheel by adjusting parameters such as speed, torque, or position based on real-time sensor feedback. By analyzing the sensor data and applying control algorithms, the computer-controlled components can ensure efficient and accurate operation of the worm wheel system in accordance with the desired performance requirements.
- Positioning and Motion Control: Computer-controlled components can enable advanced positioning and motion control capabilities in worm wheel systems. By integrating with the worm wheel, electronic components can precisely control the position and movement of the system. This is particularly useful in applications where precise positioning or synchronized motion is required, such as robotics, CNC machines, or automated systems. The computer-controlled components receive input commands, process them, and generate appropriate signals to control the worm wheel’s rotation and positioning.
- Monitoring and Diagnostics: Electronic components can facilitate real-time monitoring and diagnostics of worm wheel systems. By continuously monitoring parameters such as temperature, vibration, or load, the computer-controlled components can detect any abnormalities or potential issues in the system. This allows for proactive maintenance or troubleshooting actions to be taken, minimizing downtime and optimizing the performance and lifespan of the worm wheel. Additionally, the computer-controlled components can generate diagnostic reports, log data, and provide visual or remote alerts for timely intervention.
- Integration with Human-Machine Interfaces: Computer-controlled components can integrate with human-machine interfaces (HMIs) to provide a user-friendly and intuitive interface for interacting with the worm wheel systems. HMIs can include touchscreens, control panels, or software applications that allow operators or users to input commands, monitor system status, adjust parameters, and receive feedback. This integration enhances the usability, flexibility, and accessibility of worm wheel systems in various applications.
- Networking and Communication: Computer-controlled components can be integrated into networked systems, allowing for communication and coordination with other devices or systems. This integration enables seamless integration of the worm wheel into larger automated systems, production lines, or interconnected machinery. Networking and communication capabilities facilitate data exchange, synchronization, and coordination, enhancing overall system performance and enabling advanced functionalities.
By integrating electronic or computer-controlled components with worm wheels, modern applications can benefit from enhanced control, precision, monitoring, and communication capabilities. These advancements enable optimized performance, improved efficiency, and increased reliability in various industries and sectors.
How do worm wheels contribute to the precision and accuracy of motion in machinery?
Worm wheels play a significant role in achieving precision and accuracy of motion in machinery. Here’s a detailed explanation of how worm wheels contribute to precision and accuracy:
- Reduced Backlash: Backlash refers to the amount of clearance or play between meshing gears, which can result in undesired movement or positioning errors. Worm wheels have a self-locking mechanism that minimizes or eliminates backlash. The helical teeth of the worm wheel engage with the worm gear at an angle, creating a wedging effect that prevents reverse motion. This inherent self-locking property ensures precise positioning and eliminates backlash, contributing to the overall precision of motion.
- High Gear Reduction Ratio: Worm wheels offer high gear reduction ratios, allowing for fine control and precise motion. The helical shape of the worm gear teeth and the interaction with the worm wheel enable gear ratios ranging from 5:1 to 100:1 or even higher. This high reduction ratio allows for slower rotational output and finer increments of motion, enhancing precision in applications that require precise positioning or control.
- Single Directional Control: Worm wheels provide excellent directional control, allowing power transmission in a single direction only. The self-locking nature of the worm wheel prevents any reverse motion from the output side to the input side. This property is particularly beneficial in applications where precise and accurate motion in a specific direction is required, such as in robotics or CNC machinery.
- Smooth Operation: The helical tooth profile of the worm wheel contributes to smooth and quiet operation. The helical teeth engage gradually, resulting in a smooth transfer of power and reduced noise and vibration. This smooth operation is crucial for applications that require precise and accurate motion, as it helps minimize disturbances and ensure consistent movement without jarring or jerking.
- Increased Contact Area: The sliding action between the worm gear and the worm wheel creates a larger contact area compared to other gear types. The increased contact area allows for better load distribution and improved torque transmission. This helps to minimize tooth wear, enhance durability, and maintain the accuracy of motion over an extended period of operation.
- Compact Design: Worm wheels offer a compact design due to their perpendicular arrangement. The compactness allows for efficient use of space and integration into machinery with limited space constraints. The reduced size and weight contribute to improved stability and accuracy by minimizing flexing or bending that can occur in larger gear systems.
By incorporating worm wheels into machinery, engineers can achieve precise and accurate motion control, ensuring the desired positioning, repeatability, and overall performance of the system. These characteristics make worm wheels suitable for a wide range of applications that require high precision and accuracy, such as robotics, machine tools, positioning systems, and automation equipment.
editor by Dream 2024-04-30
China 59mm Dc Motor Geared Ratio 170 Gear Motor Dc 24V for Electric Clothes Drying Rack worm gearbox exploded view
Warranty: 3months-1year
Design Amount: D59R-2430-40
Use: House Appliance, Smart Residence, Electric powered Laundry Drying Rack
Type: Equipment MOTOR
Torque: 16n.m
Construction: Everlasting Magnet
Commutation: Brush
Shield Function: Completely Enclosed
Velocity(RPM): 40RPM
Steady Recent(A): 1.2A
Efficiency: IE two
Motor Diameter: 59mm
Motor Variety: motor dc 24v
Voltage: DC12V 24V 36V 48V 72V
Electricity: 30W – 60W
Velocity: fifteen RPM – 180RPM
Content of gear: Plastic / copper Equipment
Motor gearbox: Remaining angle / rignt angle gearbox
Diameter of output shaft: 6mm 8mm 10mm 12mm 14mm(optional)
Velocity Sensor: Hall sensor,encoder,opto sensor
OEM / ODM Services: Settle for
Packaging Information: 10pcs/ctnmotor dc 24v
Port: HangZhou / HangZhou
59mm Dc Motor Geared Ratio 1:70 Gear Motor Dc 24V for Electrical Outfits Drying Rack Note:1.Please inform the software of your brushed dc equipment motors.2.Remember to give the load pace and load torque.3.Please pick the mounting length 50.80mm or 72mm. Note:The motor is exceptional for electrical clothing drying rack,WEWIN could provide diverse options in accordance to your requirements of various torques.Motor Dc 24V SpecificationElectric garments drying rack is functioning by way of motor by distant handle.The gear motor could assure the secure lifting pace of the electric powered drying rack and management its peak.The gear box could drive a pair of screw nuts to switch the rotary movement into linear motion and comprehensive the lifting by forward and reverse rotation of the motor. Product Overview
| Motor Dimension | 45mm 49mm 59mm 63mm 76mm 88mm 110mm |
| Motor Electrical power | DC 12V 24V 36V 48V 72V 110V |
| Motor sort | motor dc 24v |
| Material of Gear | Plastic gear / copper gear |
| Motor Gearbox | Appropriate Angle Gearbox Motor , Still left Anlge Equipment packing containers |
| Diameter of Output Shaft | 6mm 8mm 10mm 12mm 14mm(Optional) |
| Pace Sensor | Corridor Sensor,Dc Motor with Encoder,Opto sensor,Brake motor |
| Factory Tackle | Xihu (West Lake) Dis.,HangZhou |
| Our Dc Motors Edge | 1.Low sounds 4000hr(continually operating)3.Self Locking Motor, CZPT & Reverse4.Aggressive factory price5.Sample purchase are welcome |
| Products Variety | Voltage(V) | Power(W) | No Load | Load | Gear Ratio | Motor Duration (mm) | ||||||
| Speed(RPM) | Current(A) | Speed(RPM) | Current(A) | Torque(N.M) | ||||||||
| D59R/L-1230-15 | 12 | 30 | 15±2 | ≤1.two | 12±2 | ≤4.five | ≥4. | 1:70 | 80 | |||
| D59R/L-2430-15 | 24 | 30 | 15±2 | ≤1.two | 12±2 | ≤4.five | ≥4. | 1:70 | 80 | |||
| D59R/L-2450-36 | 24 | 50 | 36±2 | ≤1.2 | 32±2 | ≤6.5 | ≥8. | 1:70 | 80 | |||
| D59R/L-1230-65 | 12 | 30 | 65±3 | ≤1.two | 60±3 | ≤5.5 | ≥6. | 1:fifty six | 80 | |||
| D59R/L-2430-65 | 24 | 30 | 65±3 | ≤1.2 | 60±3 | ≤5.five | ≥6. | 1:fifty six | 80 | |||
| D59R/L-4830-65 | 48 | 30 | 65±3 | ≤1.2 | 60±3 | ≤5.5 | ≥ ATV Entrance Sprocket For CZPT CZPT 200 ER TRI-MOTO 6. | 1:56 | 80 | |||
| D59R/L-4230-130 | 42 | 30 | 130±5 | ≤1.five | 100±5 | ≤6.5 | ≥4. | 1:28 | 80 | |||
| D59R/L-2430-a hundred and fifty | 24 | 30 | 150±5 | ≤1. | 130±5 | ≤6.five | ≥4. | 1:28 | 80 | |||
| D59R/L-2430-one hundred eighty | 24 | 30 | 180±5 | ≤1.two | 150±5 | ≤6.five | ≥4. | 1:28 | 80 | |||
| D59R/L-2430-210 | 24 | 30 | 210±5 | ≤1.five | 180±2 | ≤6.five | ≥4.two | 1:28 | 80 | |||
Worm gear reducer gearbox
A worm gear reducer gearbox is a gear reducer gearbox that uses a worm gear train to reduce the required force. Unlike traditional gear reducer gearboxes, these units are small and require low horsepower ratings. This reduces their efficiency, but their low cost and compact design help make up for this shortcoming. However, these gear reducer gearboxes have some drawbacks, including their tendency to lock up when reversing.
high efficiency
High-efficiency worm reducer gearboxes are ideal for applications where high performance, repeatability, and accuracy are critical. It consists of an input hypoid gear and an output hypoid bevel gear. The input worm rotates perpendicular to the output worm, so for every revolution of the input worm, the output gear makes one revolution. This arrangement reduces friction (another source of energy loss) in a high-efficiency worm gear to at least two arc minutes.
Compared with worm gear reducer gearboxes, hypoid gearmotors offer several advantages, including lower operating costs and higher efficiency. For example, hypoid gear motors can transmit more torque even at high reduction ratios. Also, they are more efficient than worm gear reducer gearboxes, which means they can produce the same output with a smaller motor.
In recent years, the efficiency of worm gear reducer gearboxes has been dramatically improved. Manufacturers have made great strides in materials, design, and manufacturing. New designs, including dual-enveloping worm gear reducer gearboxes, increase efficiency by 3 to 8 percent. These improvements were made possible through countless hours of testing and development. Worm gear reducer gearboxes also offer lower initial costs and higher overload capability than competing systems.
Worm gear reducer gearboxes are popular because they provide maximum reduction in a small package. Their compact size makes them ideal for low to medium-horsepower applications and they are reticent. They also offer higher torque output and better shock load tolerance. Finally, they are an economical option to reduce the device’s power requirements.
low noise
Low-noise worm gear reducer gearboxes are designed to reduce noise in industrial applications. This type of reducer gearbox uses fewer bearings and can work in various mounting positions. Typically, a worm reducer gearbox is a single-stage unit with only one shaft and one gear. Since there is only one gear, the noise level of the worm gear reducer gearbox will be lower than other types.
A worm gear reducer gearbox can be integrated into the electric power steering system to reduce noise. Worm reducer gearboxes can be made and from many different materials. The following three-stage process will explain the components of a low-noise worm reducer gearbox.
Worm gear reducer gearboxes can be mounted at a 90-degree angle to the input worm shaft and are available with various types of hollow or solid output shafts. These reducer gearboxes are especially beneficial for applications where noise reduction is essential. They also have fewer parts and are smaller than other types of reducer gearboxes, making them easier to install.
Worm gear reducer gearboxes are available from various manufacturers. Due to their widespread availability, gear manufacturers maintain extensive inventories of these reducer gearboxes. The worm gear ratio is standard, and the size of the worm gear reducer gearbox is universal. Also, worm gear reducer gearboxes do not need to be sized for a specific purpose, unlike other load interruptions.
A worm gear reducer gearbox is a transmission mechanism with a compact structure, large transmission ratio, and self-locking function under certain conditions. The worm gear reducer gearbox series products are designed with American technology and have the characteristics of stable transmission, strong bearing capacity, low noise, and compact structure. In addition, these products can provide a wide range of power supplies. However, these worm reducer gearboxes are prone to leaks, usually caused by design flaws.
Worm gear reducer gearboxes are available in single-stage and double-stage. The first type consists of an oil tank that houses the worm gear and bearings. The second type uses a worm gear with a sleeve for the first worm gear.
When choosing a gear reducer gearbox, it is essential to choose a high-quality unit. Improper gear selection can cause rapid wear of the worm gear. While worm gear reducer gearboxes are generally durable, their degree of wear depends on the selection and operating conditions. For example, overuse, improper assembly, or working in extreme conditions can lead to rapid wear.
Worm reducer gearboxes reduce speed and torque. Worm gears can be used to reduce the speed of rotating machines or inertial systems. Worm gears are a type of bevel gear, and their meshing surfaces have great sliding force. Because of this, worm gears can carry more weight than spur gears. They are also harder to manufacture. However, the high-quality design of the worm gear makes it an excellent choice for applications requiring high torque and high-speed rotation.
Worm gears can be manufactured using three types of gears. For large reduction ratios, the input and output gears are irreversible. However, the worm reducer gearbox can be constructed with multiple helices. The multi-start worm drive also minimizes braking effects.
Self-locking function
The worm reducer gearbox is self-locking to prevent the load from being driven back to the ground. The self-locking function is achieved by a worm that meshes with the rack and pinion. When the load reaches the highest position, the reverse signal is disabled. The non-locking subsystem back-drives the load to its original position, while the self-locking subsystem remains in its uppermost position.
The self-locking function of the worm reducer gearbox is a valuable mechanical feature. It helps prevent backing and saves the cost of the braking system. Additionally, self-locking worm gears can be used to lift and hold loads.
The self-locking worm gear reducer gearbox prevents the drive shaft from driving backward. It works with the axial force of the worm gear. A worm reducer gearbox with a self-locking function is a very efficient machine tool.
Worm gear reducer gearboxes can be made with two or four teeth. Single-ended worms have a single-tooth design, while double-ended worms have two threads on the cylindrical gear. A multi-boot worm can have up to four boots. Worm reducer gearboxes can use a variety of gear ratios, but the main advantage is their compact design. It has a larger load capacity than a cross-shaft helical gear mechanism.
The self-locking function of the worm reducer gearbox can also be used for gear sets that are not necessarily parallel to the shaft. It also prevents backward travel and allows forward travel. The self-locking function is achieved by a ratchet cam arranged around the gear member. It also enables selective coupling and decoupling between gear members.
high gear ratio
Worm reducer gearboxes are an easy and inexpensive way to increase gear ratios. These units consist of two worm gears – an input worm gear and an output worm gear. The input worm rotates perpendicular to the output worm gear, which also rotates perpendicular to itself. For example, a 5:1 worm gearbox requires 5 revolutions per worm gear, while a 60:1 worm gearbox requires 60 revolutions. However, this arrangement is prone to inefficiency since the worm gear experiences only sliding friction, not rolling friction.
High-reduction applications require many input revolutions to rotate the output gear. Conversely, low input speed applications suffer from the same friction issues, albeit with a different amount of friction. Worms that spin at low speeds require more energy to maintain their movement. Worm reducer gearboxes can be used in many types of systems, but only some are suitable for high-speed applications.
Worm gears are challenging to produce, but the envelope design is the best choice for applications requiring high precision, high efficiency, and minimal backlash. Envelope design involves modifying gear teeth and worm threads to improve surface contact. However, this type of worm gear is more expensive to manufacture.
Worm gear motors have lower initial meshing ratios than hypoid gear motors, which allows the use of smaller motors. So a 1 hp worm motor can achieve the same output as a 1/2 hp motor. A study by Agknx compared two different types of geared motors, comparing their power, torque, and gear ratio. The results show that the 1/2 HP hypoid gear motor is more efficient than the worm gear motor despite the same output.
Another advantage of the worm gear reducer gearbox is the low initial cost and high efficiency. It offers high ratios and high torque in a small package, making it ideal for low to medium-horsepower applications. Worm gear reducer gearboxes are also more shock-resistant.
editor by Cx 2023-06-27
China 12V 24V 30KG 40KG.CM high torque dc gear motor for vending machine combined worm gearbox
2023-06-16
China 10nm torque dc motor Low Noise 58SW31ZY 58mm gearbox 12v 18v small worm gear dc electric motor for Wending Machine supplier
2023-06-16
China factory CZPT X/B Series CZPT Gear Motor Reducer Cycloidal Gearbox for Manufacturing Plant double stage worm gearbox
Product Description
Product Description
Aokman X/B series Single stage gear motor reducer cycloidal gearbox for Manufacturing Plant
Components:
1. Housing: Cast Iron
2. Gearset: Cycloid Wheel & Pin Wheel
3. Input Configurations:
Equipped with Electric Motors (AC Motor, Brake Motor, Explosion-proof Motor, Regulated Speed Motor, Hydraulic Motor)
IEC-normalized Motor Flange
Keyed CZPT Shaft Input
4. Output Configurations:
Keyed CZPT Shaft Output
Detailed Photos
Features:
1. Large reduction ratio, 1-stage ratio 9~87, 2-stage ratio 121~1849, larger reduction ratio is available by 3-stage or multistage combinations
2. High efficiency, the average efficiency is over 90%
3. Compact structure, light weight
4. Stable and reliable operation, low noise5. Long service life
Product Parameters
Parameters:
| Models | Power | Ratio | Max. Torque | Output Shaft Dia. | Input Shaft Dia. |
| 1 Stage | |||||
| X2(B0/B12) | 0.37~1.5 | 9~87 | 150 | Φ25(Φ30) | Φ15 |
| X3(B1/B15) | 0.55~2.2 | 9~87 | 250 | Φ35 | Φ18 |
| X4(B2/B18) | 0.75~4.0 | 9~87 | 500 | Φ45 | Φ22 |
| X5(B3/B22) | 1.5~7.5 | 9~87 | 1,000 | Φ55 | Φ30 |
| X6(B4/B27) | 2.2~11 | 9~87 | 2,000 | Φ65(Φ70) | Φ35 |
| X7 | 3.0~11 | 9~87 | 2,700 | Φ80 | Φ40 |
| X8(B5/B33) | 5.5~18.5 | 9~87 | 4,500 | Φ90 | Φ45 |
| X9(B6/B39) | 7.5~30 | 9~87 | 7,100 | Φ100 | Φ50 |
| X10(B7/B45) | 15~45 | 9~87 | 12,000 | Φ110 | Φ55 |
| X11(B8/B55) | 18.5~55 | 9~87 | 20,000 | Φ130 | Φ70 |
| 2 Stage | |||||
| X32(B10) | 0.25~0.55 | 121~1849 | – | Φ35 | Φ15 |
| X42(B20/B1812) | 0.37~0.75 | 121~1849 | – | Φ45 | Φ15 |
| X53(B31/B2215) | 0.55~1.5 | 121~1849 | – | Φ55 | Φ18 |
| X63(B41/B2715) | 0.75~2.2 | 121~1849 | – | Φ65(Φ70) | Φ18 |
| X64(B42/B2718) | 0.75~2.2 | 121~1849 | – | Φ65(Φ70) | Φ22 |
| X74 | 1.1~3.0 | 121~1849 | – | Φ80 | Φ22 |
| X84(B52/B3318) | 1.5~4.0 | 121~1849 | – | Φ90 | Φ22 |
| X85(B53/B3322) | 2.2~5.5 | 121~1849 | – | Φ90 | Φ30 |
| X95(B63/B3922) | 3.0~7.5 | 121~1849 | – | Φ100 | Φ30 |
| X106(B74/B4527) | 4.0~11 | 121~1849 | – | Φ110 | Φ35 |
| X117(B84/B5527) | 4.0~15 | 121~1849 | – | Φ130 | Φ40(Φ35) |
1 Stage Ratio: 9, 11, 17, 23, 29, 35, 43, 59, 71, 87
2 Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849
Installation:
Foot Mounted
Flange Mounted
Lubrication:
| – | Foot-mounted | Flange-mounted | ||
| 1 Stage | X2~X4 | X5~X11 | X2~X4 | X5~X11 |
| Grease Lubrication | Oil-bath & Splash Lubrication | Grease Lubrication | Oil Pump Circulation Lubrication | |
| 2 Stage | X32~X42 | X53~X117 | X32~X42 | X53~X117 |
| Grease Lubrication | Oil-bath & Splash Lubrication | Grease Lubrication | Oil Pump Circulation Lubrication | |
Cooling:
Natural Cooling
Packaging & Shipping
Company Profile
Our Advantages
FAQ
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
Welcome to contact us for more detail information and inquiry.
If you have specific parameters and requirement for our gearbox, customization is available.
| Application: | Motor, Machinery, Agricultural Machinery, Industry |
|---|---|
| Function: | Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Cycloidal |
| Hardness: | Hardened |
| Installation: | Vertical Type |
| Step: | Double-Step |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
A-Drive PWC single worm reducer gearbox
A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.
Agknx driver
Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H
X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle
RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
AGknx Single
Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single
If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
AGknx X & H
The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.
editor by CX 2023-05-22
China factory 5HP Motor Helical Gear Worm Gearbox for Drilling Machines worm gear backdrive
Product Description
Detailed Photos
Features of S series reducer
The same model can be equipped with motors of various powers. It is easy to realize the combination and connection between various models.
The transmission efficiency is high, and the single reducer efficiency is up to 96%. three
The transmission ratio is subdivided and the range is wide. The combined model can form a large transmission ratio and low output speed.
The installation forms are various, and can be installed with any foot, B5 flange or B4 flange. The foot mounting reducer has 2 machined foot mounting planes.
Helical gear and worm gear combination, compact structure, large reduction ratio.
Installation mode: foot installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
Input mode: motor direct connection, motor belt connection or input shaft, connection flange input.
Average efficiency: reduction ratio 7.5-69.39 is 77%; 70.43-288 is 62%; The S/R combination is 57%.
S57 SF57 SA57 SAF57 S series helical worm gear box speed reducer 0.18kw 0.25kw 0.37kw 0.55kw 0.75kw 1.1kw 1.5kw 2.2kw 3kw, max. permissible torque up to 300Nm, transmission ratios from 10.78 to 196.21. Mounting mode: foot mounted, flange mounted, short flange mounted, torque arm mounted. Output shaft: CZPT shaft, hollow shaft (with key, with shrink disc and with involute spline).
Product Parameters
Company Profile
Certifications
Packaging & Shipping
FAQ
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | 90 Degree |
| Layout: | Expansion |
| Gear Shape: | Bevel Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
Worm reducer gearbox
Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.
Mechanics
A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.
Sizes
Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
Applications
The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.
Cost
The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
Self-locking function
A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.
editor by CX 2023-05-10
China Good quality Reduction Gears Electric Motor Gearbox 1400 Rpm Speed Reduce Gear Box for Wholesale wholesaler
Product Description
Customization reduction gears electric motor gearbox 1400 rpm speed reduce gear box for wholesale
Product Description
Components:
1. Housing: Cast Iron
2. Gears: Helical Gears
3. Input Configurations:
Equipped with Electric Motors
Solid Shaft Input
IEC or NEMA Motor Flange
4. Applicable Motors:
Single Phase AC Motor, Three Phase AC Motor
Brake Motors
Inverter Motors
Multi-speed Motors
Explosion-proof Motor
Roller Motor
5. Output Configurations:
Solid Shaft Output
Detailed Photos
Models:
R Series (Foot-mounted): R18~R168
RS Series (Foot-mounted, CZPT Shaft Input)
RF Series (Flange-mounted): RF18~RF168
RFS Series (Flange-mounted, CZPT Shaft Input)
RX Series (1 Stage, Foot-mounted): RX38~RX158
RXS Series (1 Stage, Foot-mounted, CZPT Shaft Input)
RXF Series (1 Stage, Flange-mounted): RXF38~RXF158
RXFS Series (1 Stage, Flange-mounted, CZPT Shaft Input)
RM Series (agitator gearboxes): Specially designed for agitating applications
Features:
1. Compact structure, modular design
2. Single-stage, two-stage and three-stage sizes
3. High reduction ratio and torque density
4. Long service life
5. Can be combined with other types of gearboxes (Such as R Series, K Series, F Series, S Series, UDL Series)
Parameters:
2 Stage or 3 Stage
Installation:
Foot Mounted
Flange Mounted
Lubrication:
Oil-bath and Splash Lubrication
Cooling:
Natural Cooling
Product Parameters
| Models | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | Ratio | Max. Torque(Nm) |
| R/RF18 | 20mm | – | 0.18~0.75 | 3.83~74.84 | 85 |
| R/RF28 | 25mm | 16mm | 0.18~3 | 3.37~135.09 | 130 |
| R/RF38 | 25mm | 16mm | 0.18~3 | 3.41~134.82 | 200 |
| R/RF48 | 30mm | 19mm | 0.18~5.5 | 3.83~176.88 | 300 |
| R/RF58 | 35mm | 19mm | 0.18~7.5 | 4.39~186.89 | 450 |
| R/RF68 | 35mm | 19mm | 0.18~7.5 | 4.29~199.81 | 600 |
| R/RF78 | 40mm | 24mm | 0.18~11 | 5.21~195.24 | 820 |
| R/RF88 | 50mm | 28mm | 0.55~22 | 5.36~246.54 | 1550 |
| R/RF98 | 60mm | 38mm | 0.55~30 | 4.49~289.6 | 3000 |
| R/RF108 | 70mm | 42mm | 2.2~45 | 5.06~245.5 | 4300 |
| R/RF138 | 90mm | 55mm | 5.5~55 | 5.51~223.34 | 8000 |
| R/RF148 | 110mm | 55mm | 11~90 | 5.00~163.46 | 13000 |
| R/RF168 | 120mm | 70mm | 11~160 | 8.77~196.41 | 18000 |
1 Stage
| Models | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | Ratio | Max. Torque(Nm) |
| RX/RXF38 | 20mm | 16mm | 0.18~1.1 | 1.6~3.76 | 20 |
| RX/RXF58 | 20mm | 19mm | 0.18~5.5 | 1.3~5.5 | 70 |
| RX/RXF68 | 25mm | 19mm | 0.18~7.5 | 1.4~6.07 | 135 |
| RX/RXF78 | 30mm | 24mm | 1.1~11 | 1.42~5.63 | 215 |
| RX/RXF88 | 40mm | 28mm | 3~22 | 1.39~6.44 | 400 |
| RX/RXF98 | 50mm | 38mm | 5.5~30 | 1.42~5.82 | 600 |
| RX/RXF108 | 60mm | 42mm | 7.5~45 | 1.44~6.65 | 830 |
| RX/RXF128 | 75mm | 55mm | 7.5~90 | 1.56~6.47 | 1110 |
| RX/RXF158 | 90mm | 70mm | 11~132 | 1.63~6.22 | 1680 |
Packaging & Shipping
Packaging & Delivery
Speed Reducer Worm Gearbox Packaging Details:Plastic Bags, Plywood Cases
Port:ZheJiang /HangZhou
Company Profile
1.More than 35 years experience in R&D and manufacturing, export gear motors & industrial gearboxes.
2. Standardization of the gearbox series
3. Strong design capability for large power & customized gearboxes.
4. High quality gearboxes and proven solutions provider.
5. Strict quality control process, stable quality.
6. Less than 2% of the quality complaints.
7. Modular design, short delivery time.
8. Quick response & professional services.
Customer visiting:
After Sales Service
| Pre-sale services | 1. Select equipment model. |
| 2.Design and manufacture products according to clients’ special requirement. | |
| 3.Train technical personal for clients | |
| Services during selling | 1.Pre-check and accept products ahead of delivery. |
| 2. Help clients to draft solving plans. | |
| After-sale services | 1.Assist clients to prepare for the first construction scheme. |
| 2. Train the first-line operators. | |
| 3.Take initiative to eliminate the trouble rapidly. | |
| 4. Provide technical exchanging. |
FAQ
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
If you are interested in our product, welcome you contact me.
Our team will support any need you might have.
| Application: | Machinery, Industry |
|---|---|
| Hardness: | Hardened |
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Helical Gear |
| Step: | Single-Step |
| Customization: |
Available
|
|
|---|
What is a worm gear reducer gearbox?
A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
Hollow shaft worm gear reducer gearbox
The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.
Double throat worm gear
Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
Self-locking function
One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.
Heat generated by worm gears
Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
Size of worm gear reducer gearbox
Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.
editor by CX 2023-04-25
China 12v 24v Brushless Dc Gear Motor for Agricultural Equipment and Machine, Customized IP65 High Temperature with high quality
Guarantee: 3years
Model Variety: SMT
Use: Home Equipment, New Arrival Handmade Appeal Males Bracelet Volcanic All-natural Stone CZPT Eye CZPT Beaded Bracelets Beauty instrument, 7075 T6 Aluminum Plate for Automobile Sprockets Agricultural Products
Type: Micro Motor
Torque: 5Nm 8Nm 10Nm customed
Building: Long term Magnet
Commutation: Brushless
Shield Feature: Drip-evidence
Velocity(RPM): 50rpm 80rpm 1 D5 D9N D6C D4D D7G Dozer Phase .5
one/409 1/514 1/645 1/809
Far more Alternatives:
Custom-made Overall performance Huge torque Minimal pace motors
with gear reducers
Earth equipment motors:
Worm Gear Motors
A-Drive PWC single worm reducer gearbox
A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.
Agknx driver
Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H
X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle
RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.AGknx Single
Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single
If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.AGknx X & H
The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.
editor by CX 2023-04-21
China 12MM Mini Coreless DC Motor with Brush 50Rpm 60Rpm 1.5V 2V 2.5V 3V 3.7V 6V Brushed Mini Coreless Metal Gear Motor for Smart Home bevel vs worm gearbox
Warranty: 3months-1year
Product Amount: GM24-1221
Utilization: BOAT, Car, Residence Appliance, Cosmetic instrument, Intelligent Home, Healthcare Products
Sort: Mini Coreless Cotor, Mini Coreless Cotor
Torque: 37g.cm
Building: Everlasting Magnet
Commutation: Brush
Safeguard Function: Entirely Enclosed
Velocity(RPM): 40~180RPM
Steady Recent(A): 20mA
Effectiveness: 65~eighty five%
Path of rotation: CW/CCW
No-load velocity: 40~18050RPM
Rated velocity: thirty~1800RPM
Rated torque: .01~37g.cm
Motor Measurement: 12mm*21mm
Gear Dimensions: 24mm*10mm*9mm
Certification: RoHS, ISO9001
Packaging Information: Anticipate Regular Carton and Foam
Port: HangZhou
Our custom-made solutions contain: Goods Description 12MM Mini Coreless DC Motor with Brush 50Rpm 60Rpm 1.5V 2V 2.5V 3V 3.7V 6V Brushed Mini Coreless Metallic Equipment Motor for Intelligent House
| Gear motor Specialized Information | |||||||||||||||||
| Reduvtion rtio | 26 | 50 | 110 | 293 | 350 | 380 | 500 | 250 | |||||||||
| Gearbox duration | mm | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | ||||||||
| No-load speed | rpm | 288 | 150 | 68 | 26 | 21 | 20 | 15 | 30 | ||||||||
| Rated pace | rpm | 259.9 | 135.two | 61.four | 23.one | 19.3 | 17.8 | 13.5 | 27. | ||||||||
| Rated torque | Kg.cm | 0.019 | 0.037 | 0.082 | 0.220 | 0.260 | 0.286 | 0.377 | 0.one hundred eighty | ||||||||
| Max.momentarytolerance torque | Kg.cm | 0.57 | 1.09 | 2.40 | 6.forty one | 7.sixty six | 8.31 | 10.90 | 5.47 | ||||||||
| Shipping time | ||||||||
| DHL: | 3-5 operating times | FedEx | 7-9 doing work times | |||||
| UPS | 3-5 functioning days | EMS | 12-fifteen doing work times | |||||
| TNT | 5-7 functioning times | Sea | Depends on ship to which place | |||||
| Alibaba system has a lot more logistics possibilities, welcome to seek the advice of us | ||||||||
What is a worm gear reducer gearbox?
A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
Hollow shaft worm gear reducer gearbox
The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.
Double throat worm gear
Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
Self-locking function
One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.
Heat generated by worm gears
Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
Size of worm gear reducer gearbox
Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.
editor by CX 2023-04-21