Product Description
This is our new product,servo motor,it is used in AGV vehicle,Robot driving system, tracked cars.Motor power up to 200w/500W/800W/1000W/1.5kw(2hp).volt is 48V,speed is 1500r/min.
1.Protection grade:IP65, insulation grade:F
2.Winding overhang structure optimization, to minimize the copper loss and iron loss minimization, small volume, light weight, low temperature rise, high efficiency
3.Super high coercivity, the maximum magnetic energy product NdFe35 permanent magnetic materials, strong resistance to demagnetization, motor performance is stable.
4.Low noise, low vibration, low moment of inertia.
5.High torque, fast dynamic response, wide speed range, strong overload capacity (four times)
1.Product Features:
| a. Protection grade:IP55, insulation grade:F |
| b. Winding overhang structure optimization, to minimize the copper loss and iron loss minimization, small volume, light weight, low temperature rise, high efficiency |
| c. Super high coercivity, the maximum magnetic energy product NdFe35 permanent magnetic materials, strong resistance to demagnetization, motor performance is stable. |
| d. Low noise, low vibration, low moment of inertia. |
| e. High torque, fast dynamic response, wide speed range, strong overload capacity (four times) |
2.Features:
|
1)High Torque to inertia ratio&up to 15000Nm/kgm² |
|
2)Fast dynamic response *time constant <20ms |
|
3)Wide speed adjusting&feedback up to 1000:1 |
|
4)Steady speed precision up to 0.5% |
|
5)High overload,2Mn/30s,3.5N.m/10s |
|
6)Small volume and light |
|
7)Silent,the lowest noise is only 45dB(A) |
|
8)Protected with IP55,Class F insulation |
3.Industry class:
a. The altitude should be over 1000 CHINAMFG above sea level
b. Environment temperature:-25ºC~+50ºC
c. The month average tallest relative humidity is 90%,at the same the month average lowest temperature is less than 25ºC
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Operating Speed: | Adjust Speed |
| Excitation Mode: | Excited |
| Function: | Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 10 |
| Customization: |
Available
|
|
|---|
Can you describe the various types and configurations of worm wheels available?
There are several types and configurations of worm wheels available to suit different applications and requirements. Here’s a description of the various types and configurations:
- Single-Threaded Worm Wheel: This is the most common type of worm wheel configuration. It has a single thread on its circumference that meshes with the worm gear. Single-threaded worm wheels provide a high gear reduction ratio and are used in applications where high torque and low-speed operation are required.
- Double-Threaded Worm Wheel: Double-threaded worm wheels have two threads on their circumference, which results in increased contact area and improved load distribution. This configuration allows for higher torque transmission capacity and smoother operation. Double-threaded worm wheels are utilized in applications that require even higher torque output and improved efficiency.
- Non-Cylindrical Worm Wheel: In some cases, the worm wheel may have a non-cylindrical shape. For example, it can have a concave or convex profile. Non-cylindrical worm wheels are used in specific applications where the shape is designed to accommodate unique requirements such as increased contact area, improved load distribution, or specialized motion control.
- Enveloping Worm Wheel: Enveloping worm wheels have specialized tooth profiles that provide increased contact area and improved load-carrying capacity. The teeth of the worm wheel wrap around the helical threads of the worm gear, resulting in enhanced meshing and load distribution. Enveloping worm wheels are typically used in high-load applications that require superior torque transmission and durability.
- Hypoid Worm Wheel: Hypoid worm wheels are designed with a hypoid offset, meaning that the centerline of the worm gear is offset from the centerline of the worm wheel. This configuration allows for smoother meshing and increased contact area, leading to improved load distribution and reduced wear. Hypoid worm wheels are often utilized in applications that require high torque, compact design, and smooth operation.
- Materials: Worm wheels can be made from a variety of materials depending on the application requirements. Common materials include steel, bronze, brass, and specialized alloys. Steel worm wheels offer high strength and durability, while bronze and brass worm wheels provide excellent wear resistance and self-lubricating properties. The choice of material depends on factors such as load capacity, operating conditions, and cost considerations.
These are some of the types and configurations of worm wheels available. The selection of a particular type depends on the specific application requirements, including torque, speed, load capacity, space constraints, and desired efficiency. It’s important to consider factors such as tooth profile, material selection, and manufacturing precision to ensure the reliable and efficient operation of the worm wheel in a given application.
Can you provide examples of products or machinery that use worm wheels in their systems?
Yes, there are numerous products and machinery that utilize worm wheels as integral components in their systems. Here are some examples:
- Elevators: Worm wheels are commonly used in elevator systems to control the vertical movement of the elevator car. The high gear reduction ratio of the worm wheel allows for precise and controlled lifting and lowering of the elevator. The self-locking property of the worm wheel ensures that the elevator remains stationary at each floor, enhancing safety and stability.
- Conveyors: Conveyors, such as belt conveyors or screw conveyors, often incorporate worm wheels to drive the movement of the conveyor belt or screw. The gear reduction provided by the worm wheel allows for controlled and synchronized material handling in industries such as manufacturing, mining, and logistics.
- Automotive Applications: Worm wheels are utilized in various automotive applications. For example, power steering systems use worm wheels to convert the rotational motion of the steering wheel into the linear motion required for steering the vehicle. Additionally, some automotive seat adjustment mechanisms and convertible roof systems use worm wheels for precise positioning and control.
- Machine Tools: Worm wheels are found in machine tools like milling machines, lathes, and grinders. They are often used in the feed mechanisms to control the movement of the workpiece or cutting tool with high precision and accuracy. The high gear reduction ratio of the worm wheel enables fine adjustments of the feed rate and ensures stable and controlled machining operations.
- Robotics: Worm wheels are employed in various robotic systems for precise motion control. They can be found in robotic arms, grippers, and joints, allowing for accurate positioning and movement. The self-locking property of the worm wheel ensures that the robot maintains its position when not actively driven, providing stability and safety in robotic applications.
- Positioning Systems: Precision positioning systems, such as linear stages or rotary stages, utilize worm wheels to achieve accurate and repeatable motion. These systems are commonly used in semiconductor manufacturing, optics, microscopy, and other industries where precise positioning is critical. Worm wheels provide the necessary gear reduction and precise control required for precise positioning applications.
- Gate Operators: Worm wheels are employed in gate operator systems to control the opening and closing of gates, such as in residential or commercial gate automation. The gear reduction provided by the worm wheel allows for controlled and smooth operation of the gate, ensuring security and convenience.
- Industrial Mixers: Worm wheels are used in industrial mixers and agitators to control the rotational speed and torque applied to the mixing blades. The gear reduction ratio of the worm wheel enables precise control of the mixing process, ensuring efficient and consistent mixing of various substances in industries like chemical processing and food production.
These examples illustrate the wide range of applications where worm wheels are utilized to provide precise motion control, torque management, and reliable performance. Their versatility and ability to control speed, torque, and direction make them valuable components in various products and machinery.
In what industries or applications are worm wheels commonly utilized?
Worm wheels, in conjunction with worm gears, find wide applications across various industries that require precise motion control, high torque, and compact design. Here’s a detailed explanation of the industries and applications where worm wheels are commonly utilized:
1. Automotive Industry: Worm wheels are used in automotive applications, such as power steering systems. They provide the necessary gear reduction to convert the rotational motion from the steering wheel into the appropriate steering force, enabling smooth and responsive steering control.
2. Industrial Machinery: Worm wheels are widely employed in various industrial machinery applications, including machine tools, conveyors, packaging machines, and material handling equipment. They provide reliable and efficient power transmission, enabling precise control of speed and torque in these systems.
3. Elevators: Worm wheels play a vital role in elevator systems, where they are used in the elevator drive mechanism to control the movement of the elevator car. They provide the necessary gear reduction to ensure smooth and controlled vertical motion, along with the ability to hold the car in position when the power is removed.
4. Robotics: Worm wheels are commonly utilized in robotic systems, particularly in robot joints and manipulators. They allow for precise and controlled movement, enabling robots to perform intricate tasks with accuracy and repeatability.
5. Printing Presses: Printing presses often employ worm wheels in their drive systems. The worm gear and worm wheel combination helps in achieving the required gear reduction for controlling the paper feed and maintaining consistent print quality.
6. Conveyor Systems: Worm wheels are found in conveyor systems that require controlled and synchronized movement of goods or materials. They provide the necessary torque and gear reduction to ensure smooth and efficient operation of the conveyor belts or rollers.
7. Agriculture and Farming: Worm wheels are utilized in various agricultural machinery, such as tractor attachments, harvesting equipment, and irrigation systems. They facilitate the transmission of power and control the rotational motion required for specific farming operations.
8. Renewable Energy: Worm wheels are used in renewable energy applications, including wind turbines and solar tracking systems. They help in achieving the required gear reduction to optimize power generation and ensure efficient tracking of the sun or wind direction.
9. Food Processing: Worm wheels are employed in food processing equipment, such as mixers, grinders, and dough kneaders. They provide the necessary gear reduction and enable precise control of rotational speed for efficient food preparation and processing.
10. Medical Equipment: Worm wheels find applications in medical equipment, such as surgical robots, imaging devices, and patient positioning systems. They contribute to precise and controlled movements, enabling accurate medical procedures and patient care.
These are just a few examples of the industries and applications where worm wheels are commonly utilized. Their ability to provide high gear reduction, compact design, and reliable power transmission makes them suitable for a wide range of mechanical systems that require precise motion control and high torque output.
editor by Dream 2024-05-09
China 2023 Professional Servo Worm Gear Box Electric Motor Gearbox Speed Reducer Gear Box Reduction worm gear reducer buy
Warranty: 1 12 months
Relevant Industries: Constructing Material Outlets, Manufacturing Plant, Equipment Fix Stores, Meals & Beverage Manufacturing unit, Farms, Cafe, Printing Retailers, Design works , Energy & Mining, Food & Beverage Stores, Other, Conveyors, meals equipment, precision machinery
Excess weight (KG): 2 KG
Tailored support: OEM, ODM
Gearing Arrangement: Worm
Output Torque: sixteen-1760N.m
Enter Pace: ≤1500 rpm
Output Speed: *
Product identify: RV Worm Speed Reducer Equipment Box
Ingress Defense: IP65
Ratio: 5~100
Coloration: Gray /Bule/Black
Warmth treatment: floor hardening
Housing Content: aluminum alloy Solid Iron
Certification: CCC,CE
Port: HangZhou/ZheJiang / China Port
| Model No. | Output torque | Rated input velocity | Max input velocity | Ratio | Rated Electrical power | lnput shaft diameter(mm) | Output shaft diameter(mm) | |||||||
| RV571 | 13N.m | ≤1500rpm | 3000rpm | 5~sixty | 60W~90W | Φ9 | Φ11 | |||||||
| RV030 | 19N.m | ≤ H45 Mini excavator observe bottom roller for Hanix undercarriage components 1500rpm | 3000rpm | 5~80 | 60W~180W | Φ9 | Φ14 | |||||||
| RV040 | 39N.m | ≤1500rpm | 3000rpm | 5~100 | 60W~550W | Φ11 | Φ18 | |||||||
| RV050 | 70N.m | ≤1500rpm | 3000rpm | 5~a hundred | 120W~750W | Φ14 | Φ25 | |||||||
| RV063 | 126N.m | ≤1500rpm | 3000rpm | 7.5~one hundred | 250W~1500W | Φ19 | Φ25 | |||||||
| RV075 | 202N.m | ≤1500rpm | 3000rpm | 7.5~one hundred | 550W~4000W | Φ24 | Φ28 | |||||||
| RV090 | 351N.m | ≤1500rpm | 3000rpm | 7.5~a hundred | 750W~4000W | Φ24 | Φ35 | |||||||
| RV110 | 630N.m | ≤1500rpm | 3o00rpm | 7.5~a hundred | 1100W~7500W | Φ Completely automatic 4 strands higher effectiveness pp rope twisting plastic rope making equipment 28 | Φ42 | |||||||
| RV130 | 1571N.m | ≤1500rpm | 3000rpm | 7.5~100 | 1500W~7500W | Φ30 | Φ45 | |||||||
| RV150 | 1596N.m | ≤1500rpm | 3000rpm | 7.5~100 | 2200W~15000W | Φ35 | Φ50 | |||||||
| ※Ratio:5, 7.5, ten. 15, twenty, 25, thirty, forty, 50, 60, 80, one hundred | ||||||||||||||
| Model No. | Ratios(i) | Efficiency | Motor Frame Dimension Up To | Motor Energy Up To(kw) | MAX. Torque(N.m) | BKM Hypoid Gear Models Kind |
| RV571 | 5-sixty | 40-70% | 56 | 0.09 | 16 | / |
| RV030 | 5-eighty | 40-70% | 63 | 0.eighteen | 24 | / |
| RV040 | 5-a hundred | 35-70% | 71 | 0.37 | 52 | / |
| RV050 | 5-a hundred | 35-70% | 80 | 0.seventy five | 80 | BKM050 |
| RV063 | 7.5-100 | 35-65% | 90 | 1.five | 164 | BKM063 |
| RV075 | 7.5-one hundred | 35-sixty five% | 112 | 4 | 260 | BKM075 |
| RV090 | 7.5-a hundred | 35-sixty five% | 112 | 4 | 460 | BKM090 |
| RV110 | 7.5-100 | 35-sixty five% | 132 | 7.5 | 660 | BKM110 |
| RV130 | 7.5-one hundred | 35-65% | 132 | 7.5 | 1590 | / |
| RV150 | 7.5-one hundred | 35-65% | 160 | 15 | 1760 | / |
| Project | BKM Collection | BMRV Sequence |
| Transmission | Hypoid Gear | Worm wheel,worm shaft |
| Transmission performance | High(about:90%-92%) | Low(about:fifty%-85%) |
| Ratio range | 2-stages:7.5-603-levels:50-300 | 5-a hundred |
| Bearing Capacity | 1-1.5 | 1 |
| Temperature-rise | 30℃ | 60℃ |
| Running Temperature | 50-60℃ | 70-80℃ |
| The sealing reliablity | High | Low |
| Life | Long | Short |
| Self-locking | Non | Some ratio |
| Extension shaft | Non | Some |
| Q1. Are you buying and selling organization or producer?A. We are producer Located in HangZhou Town of East China. Q2. How is promise of the top quality?With ISO9001:2015,CE,CCC certificated, Our inspectors sampled examine and file material and semi-concluded spare parts. And – a hundred% examine completed spare elements before set in storage. – 100% examine ahead of assembly. – a hundred% inspect ahead of packaging.Q3. What data shall we give prior to positioning a acquire order?We can provide specialized assistance and the drawing according to your necessity if you make contact with with me.This autumn. What industries are your gearboxes getting used?Our gearboxes are broadly utilised in the areas of textile, food processing, beverage, chemical sector,escalator,computerized storage gear, metallurgy, tabacco, environmental safety, logistics and and many others.Q5. Do you have warranty support?Indeed, Factory SS304 Stainless Steel 12B Roller Chain Sprocket the gearbox is free guarantee inside of 1 a long time after shipping and delivery. | ||||||
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by Cx 2023-06-27
China Best Worm gearbox manufacturer supplier & factory Right Angle Gearbox 90 Degree Hollow Shaft High-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Low Backlash Helical Servo Bevel Gearbox with top quality best prices
We – EPG Team the biggest worm gearbox, couplings and gears factory in China with 5 diverse branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
Helical Zerol Miter Gear Gears Established Motor Appropriate Angle Spiral Bevel 90 Diploma Hypoid Spiral Bevel Gearbox China Producers Industrial
High-High quality Right Angle Gear Drives are created for performance, peaceful procedure, and prolonged support lifestyle. Ever-Electrical power provides a broad choice of Right Angle Equipment Drives in various configurations, supplies, operating speeds, and several ratios. Common catalog objects contain precision and commercial high quality equipment drives provided in each inch and metric sizes. For modifications or personalized styles get in touch with and speak to a At any time-Power purposes engineer.
Our giving includes, but is not limited to the adhering to:
Miniature sized Appropriate Angle Equipment Drives, 1 inch square, are excellent for compact styles that require minimal backlash and enter speeds up to 2000 rpm.
When weight is an situation, get Correct Angle Bevel Gear Drives that attribute a light-weight housing of PTMT Polyester 30% glass filled, precision ground stainless steel shafts, sintered bronze bearings and molded nylon gears.
Correct Angle Worm Gear Drives accommodate input speeds up to 2000 rpm and are obtainable in equipment ratios: 5:1, ten:1 and 20:1.
Right Angle and Twin Helical Equipment Drives are supplied in two designs, light-weight-responsibility, rated speeds up to 600 rpm and heavy obligation, rated speeds up to 1725 rpm.
/ The use of authentic gear manufacturer’s (OEM) component figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our firm and the shown substitution components contained herein are not sponsored, accredited, or manufactured by the OEM. /
