China Professional High Efficiency K Series Helical-Bevel Gear Units

Product Description

High Efficiency K Series Helical-Bevel Gear Units

Product Description

K Series Helical Bevel Gearbox

Overview
(1) Input mode: coupled motor, belted motor, input shaft or connection flange.
(2) Right angle output.
(3) Compact structure.
(4) Rigid tooth face.
(5) Carrying greater torque, high loading capacity.
(6) High precision gear, ensuring the unit to operate stably, smooth transmission.
(7) Low noise, long lifespan.
(8) Large overlap coefficient, abrasion resistant.

K series gear units are available in the following designs:
KAZ..Y..Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y…Foot-mounted helical-bevel gear units with CHINAMFG shaft
KAT…Y…Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y…Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft input helical-bevel gear units
KA…Y…Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel gear units
KF…Y…Flange-mounted helical-bevel gear units with CHINAMFG shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft input combinatorial helical-bevel gear units
KAF…Y…Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the special 1 ,the flange is required to be connected

Structure:

K(-)
 
K(A) K(F) Input power range Output speed Output torque
Foot-mounted Hollow shaft 
output
Flange-mounted 0.18-200kw 0.1-270r/min Up to 50000Nm

Input power rating and maximum torque:

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Structure
 
K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw)
 
0.18~
3.0
0.18~
3.0
0.18~
5.5
0.18~
5.5
0.37~
11
0.75~
22
1.3~
30
3~
45
7.5~
90
11~
160
11~
200
18.5~
200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~
44.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~1
64.44
17.97~
178.37
Maximum
Torque(N.m)
 
200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000

Gear unit weight:

Size
 
38 48 58 68 78 88 98 108 128 158 168 188
Weight
 
11 20 27 33 57 85 130 250 380 610 1015 1700

The weights are mean values, only for reference.
Maximum torque means the biggest 1 of the maximum torque related to the different ratio for the specified size.

Rated Power:0.18KW~200KW
Rated Torque:Up to 50000N.m
Gear Arrangement:Bevel Helical Hardened Gearbox
Input Speed:50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio:5.36~192.18

Product Pictures:

Our company :

Customer visiting:

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

Contact:

If you are interested in our product, welcome you contact me.
Our team will support any need you might have.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Industry
Function: Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Customization:
Available

|

How do worm wheels contribute to the precision and accuracy of motion in machinery?

Worm wheels play a significant role in achieving precision and accuracy of motion in machinery. Here’s a detailed explanation of how worm wheels contribute to precision and accuracy:

  • Reduced Backlash: Backlash refers to the amount of clearance or play between meshing gears, which can result in undesired movement or positioning errors. Worm wheels have a self-locking mechanism that minimizes or eliminates backlash. The helical teeth of the worm wheel engage with the worm gear at an angle, creating a wedging effect that prevents reverse motion. This inherent self-locking property ensures precise positioning and eliminates backlash, contributing to the overall precision of motion.
  • High Gear Reduction Ratio: Worm wheels offer high gear reduction ratios, allowing for fine control and precise motion. The helical shape of the worm gear teeth and the interaction with the worm wheel enable gear ratios ranging from 5:1 to 100:1 or even higher. This high reduction ratio allows for slower rotational output and finer increments of motion, enhancing precision in applications that require precise positioning or control.
  • Single Directional Control: Worm wheels provide excellent directional control, allowing power transmission in a single direction only. The self-locking nature of the worm wheel prevents any reverse motion from the output side to the input side. This property is particularly beneficial in applications where precise and accurate motion in a specific direction is required, such as in robotics or CNC machinery.
  • Smooth Operation: The helical tooth profile of the worm wheel contributes to smooth and quiet operation. The helical teeth engage gradually, resulting in a smooth transfer of power and reduced noise and vibration. This smooth operation is crucial for applications that require precise and accurate motion, as it helps minimize disturbances and ensure consistent movement without jarring or jerking.
  • Increased Contact Area: The sliding action between the worm gear and the worm wheel creates a larger contact area compared to other gear types. The increased contact area allows for better load distribution and improved torque transmission. This helps to minimize tooth wear, enhance durability, and maintain the accuracy of motion over an extended period of operation.
  • Compact Design: Worm wheels offer a compact design due to their perpendicular arrangement. The compactness allows for efficient use of space and integration into machinery with limited space constraints. The reduced size and weight contribute to improved stability and accuracy by minimizing flexing or bending that can occur in larger gear systems.

By incorporating worm wheels into machinery, engineers can achieve precise and accurate motion control, ensuring the desired positioning, repeatability, and overall performance of the system. These characteristics make worm wheels suitable for a wide range of applications that require high precision and accuracy, such as robotics, machine tools, positioning systems, and automation equipment.

What role do worm wheels play in controlling speed and torque in mechanical assemblies?

Worm wheels play a crucial role in controlling speed and torque in mechanical assemblies. Here’s a detailed explanation of how worm wheels contribute to speed and torque control:

  • Gear Reduction: One of the primary functions of worm wheels is to provide gear reduction. The helical teeth of the worm gear engage with the teeth of the worm wheel, resulting in a rotational output that is slower than the input speed. The gear reduction ratio is determined by the number of threads on the worm wheel and the pitch diameter of the gear. By controlling the gear reduction ratio, worm wheels enable precise speed control in mechanical assemblies.
  • Speed Control: Worm wheels allow for fine control of rotational speed in mechanical assemblies. The high gear reduction ratio achievable with worm wheels enables slower output speeds, making them suitable for applications that require precise speed regulation. By adjusting the number of threads on the worm wheel or the pitch diameter of the gear, the speed output can be precisely controlled to match the requirements of the application.
  • Torque Amplification: Worm wheels are capable of amplifying torque in mechanical assemblies. The helical tooth engagement between the worm gear and the worm wheel creates a mechanical advantage, resulting in increased torque at the output. This torque amplification allows worm wheels to transmit higher torque levels while maintaining a compact design. The ability to control torque amplification makes worm wheels suitable for applications that require high torque output, such as lifting mechanisms, conveyors, or heavy machinery.
  • Torque Limiting: Worm wheels also provide torque limiting capabilities in mechanical assemblies. The self-locking nature of the worm wheel prevents reverse motion or backdriving from the output side to the input side. This self-locking property acts as a torque limiter, restricting excessive torque transmission and protecting the system from overload or damage. The torque limiting feature of worm wheels ensures safe and controlled operation in applications where torque limitation is critical, such as safety mechanisms or overload protection devices.
  • Directional Control: Worm wheels offer precise directional control in mechanical assemblies. The helical tooth engagement between the worm gear and the worm wheel allows for power transmission in a single direction. The self-locking property of the worm wheel prevents reverse motion, ensuring that the output shaft remains stationary when the input is not actively driving it. This directional control is beneficial in applications that require precise positioning or unidirectional motion, such as indexing mechanisms or robotic systems.
  • Load Distribution: Worm wheels play a role in distributing the load in mechanical assemblies. The sliding action between the worm gear and the worm wheel creates a larger contact area compared to other gear types. This increased contact area allows for better load distribution, minimizing stress concentration and ensuring even distribution of forces. By distributing the load effectively, worm wheels contribute to the longevity and reliability of mechanical assemblies.

Overall, worm wheels provide precise speed control, torque amplification, torque limiting, directional control, and load distribution capabilities in mechanical assemblies. These features make worm wheels versatile components that are widely used in various applications where precise control, torque management, and reliable performance are essential.

How does the choice of worm wheels affect the overall performance and reliability of gearing systems?

The choice of worm wheels has a significant impact on the overall performance and reliability of gearing systems. Here’s a detailed explanation of how the selection of worm wheels affects these aspects:

  • Material Selection: The choice of material for worm wheels is crucial in determining their performance and reliability. Different materials, such as steel, bronze, or plastic, offer varying levels of strength, durability, and resistance to wear. The selection of the appropriate material should consider factors such as load requirements, operating conditions, and compatibility with other components in the system. Opting for high-quality materials that are suitable for the specific application can enhance the overall performance and reliability of the gearing system.
  • Accuracy and Tolerance: Worm wheels are manufactured with different levels of accuracy and tolerance. Higher precision and tighter tolerances result in improved gear meshing, reduced backlash, and enhanced positional accuracy. The choice of worm wheels with the appropriate accuracy and tolerance level for the application is essential for achieving the desired performance and reliability. In applications where precise motion control, high positional accuracy, or low backlash is critical, selecting worm wheels with superior accuracy can significantly enhance system performance and reliability.
  • Gear Design and Geometry: The design and geometry of worm wheels play a crucial role in determining their performance and reliability. Factors such as tooth profile, helix angle, number of teeth, and tooth surface finish influence the gear meshing characteristics, load distribution, efficiency, and noise levels. Optimal gear design and geometry should be selected based on the specific application requirements and operating conditions. Choosing worm wheels with well-designed gear profiles and appropriate geometric parameters can contribute to smoother operation, efficient power transmission, and improved reliability of the gearing system.
  • Lubrication and Maintenance: The choice of worm wheels can affect the lubrication requirements and maintenance intervals of the gearing system. Some materials or coatings may require specific lubricants or lubrication techniques to ensure proper operation and longevity. Additionally, certain worm wheel designs may have features that facilitate lubricant retention and distribution, improving gear lubrication and reducing wear. Considering the lubrication and maintenance aspects during the selection of worm wheels can enhance the overall performance, efficiency, and reliability of the gearing system.
  • Load Capacity and Efficiency: The load-carrying capacity and efficiency of the gearing system are influenced by the choice of worm wheels. Different worm wheel designs and materials have varying load capacity ratings and efficiency characteristics. Selecting worm wheels that can handle the anticipated loads and provide efficient power transmission helps prevent premature wear, excessive heat generation, and gear failures. Choosing worm wheels with appropriate load capacity and efficiency ratings ensures reliable performance and enhances the overall reliability of the gearing system.
  • Compatibility and System Integration: The choice of worm wheels should consider their compatibility and integration with other components in the gearing system. This includes factors such as shaft sizes, mounting configurations, and interfacing with the worm. Ensuring proper compatibility and integration minimizes alignment issues, reduces stress concentrations, and promotes efficient power transmission. Selecting worm wheels that are specifically designed for compatibility and seamless integration within the system enhances the overall performance, reliability, and longevity of the gearing system.

In summary, the choice of worm wheels significantly impacts the overall performance and reliability of gearing systems. Considerations such as material selection, accuracy and tolerance, gear design and geometry, lubrication and maintenance requirements, load capacity and efficiency, and compatibility with other system components all contribute to the system’s performance and reliability. By carefully selecting worm wheels that meet the specific application requirements and considering these factors, the overall performance and reliability of the gearing system can be optimized.

China Professional High Efficiency K Series Helical-Bevel Gear Units  China Professional High Efficiency K Series Helical-Bevel Gear Units
editor by Dream 2024-05-16