China Industrial Double Enveloping Worm Reduction Gearbox Appilcation for Mixer combined worm gearbox

Merchandise Description

Industrial Double Enveloping Worm Reduction Gearbox Appilcation For Mixer

Collection C  double enveloping worm gear
Model: a hundred – 500
Ratio: 10 -sixty three
Output Torque : 683 – 51180 N.m
Score Electricity : 47/25HP(1.41Kw) – 597HP(448Kw)

Description :
one, Higher torque double enveloping worm equipment adjust toughest working condition .
2,Universal design and style double enveloping worm gearbox.
3, Clean and noiseless operation double worm gearbox.
4, Higher driving effectiveness than traditional worm equipment.
five, Increasing loading capability .
six, Strict good quality test prior to shipping and delivery
seven, Custom-made layout for different software
8, Long life service interval
nine,appropriate cost with moderated
ten, average price tag & substantial good quality

As 1 of  famous double enveloping worm equipment makers,SGR’s double throated worm equipment has advantage of Substantial effectiveness, lower noise, smooth operation , it boost output torque that mean rising loading capability , enhanced gear precision, and prolonged Prolonged daily life support period . in SGR double enveloping worm gear layout ,based on diverse ratio, it has Multi-tooth meshed, allowed bigger CZPT load . with the improve of  number of driven gear enamel , that mean in speak to with the worm considerably raises output  torque pressure. apart from rising the number of driven equipment tooth in contact with the worm,  double enveloping worm gear also increase the speak to surface on every gear tooth. The genuine gear surface of instantaneous make contact with among the double throated  and the driven equipment tooth are in-strains. These lines of speak to transfer across the encounter of the gear tooth as it progresses by way of its total time of mesh with the worm. The lines of speak to in double enveloping worm gear are configured to boost the  force and decrease the anxiety on every gear tooth.

Datasheet on CUW double enveloping worm equipment reducer :

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Excess weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
a hundred 28 a hundred ninety forty eight 1.forty one~eleven.five 10 .25~ 62 683-1094 42
one hundred twenty five 32 225 fifty five two.42~19.7 10 .25 ~ 62 1170~2221 sixty five
140 38 255 sixty five 3.94~twenty five.nine 10 .25 ~ 62 1555 ~ 3473 eighty five
a hundred and sixty forty two 290 70 four.39~35.seven 10 .25 ~ 62 2143 ~4212 one hundred twenty
one hundred eighty 48 320 eighty 5.eighty three~forty seven.5 10 .25 ~ 62 2812 ~ 5387 a hundred and seventy
two hundred fifty five 350 90 7.52 ~61.two 10 .25 ~ 62 3624 ~6859 220
225 sixty 390 one hundred nine.9~eighty one.four 10 .25 ~ 62 4872 ~ 9224 290
250 sixty five 430 a hundred and ten twelve.9 ~one zero five 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 seventy five 530 one hundred forty 22.5 ~183 10 .25 ~ 62 11068~ 19450 seven hundred
355 80 595 one hundred fifty 30~245 10 .25 ~ 62 14818 ~28014  1030
four hundred ninety 660 a hundred and seventy 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 a hundred ninety forty two.6 ~347 10 .25 ~ 62 2571~39881 1980
500 a hundred and ten 815 210 fifty four.9 ~ 448 10 .25 ~ 62 27097~51180 2700

 

    US $1,000-2,000
    / Piece
    |
    1 Piece

    (Min. Order)

    ###

    Application: Motor, Machinery
    Hardness: Hardened Tooth Surface
    Installation: Horizontal Type
    Layout: Coaxial
    Gear Shape: Bevel Gear
    Step: Single-Step

    ###

    Samples:
    US$ 2000/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    ###

    Customization:

    ###

    Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
    (CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
    100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
    125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
    140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
    160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
    180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
    200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
    225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
    250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
    280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
    315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
    355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
    400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
    450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
    500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700
    US $1,000-2,000
    / Piece
    |
    1 Piece

    (Min. Order)

    ###

    Application: Motor, Machinery
    Hardness: Hardened Tooth Surface
    Installation: Horizontal Type
    Layout: Coaxial
    Gear Shape: Bevel Gear
    Step: Single-Step

    ###

    Samples:
    US$ 2000/Piece
    1 Piece(Min.Order)

    |
    Request Sample

    ###

    Customization:

    ###

    Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
    (CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
    100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
    125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
    140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
    160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
    180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
    200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
    225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
    250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
    280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
    315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
    355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
    400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
    450 100 740 190 42.6 ~347 10 .25 ~ 62 20998~39881 1980
    500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 2700

    Worm reducer gearbox – What You Need to Know

    When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.
    worm reducer

    Features

    Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

    Functions

    Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

    Applications

    This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
    The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
    worm reducer

    Cost

    Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

    aspect

    Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
    worm reducer

    Worm gear reducer gearbox oil

    Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

    China Industrial Double Enveloping Worm Reduction Gearbox Appilcation for Mixer     combined worm gearboxChina Industrial Double Enveloping Worm Reduction Gearbox Appilcation for Mixer     combined worm gearbox
    editor by czh 2023-01-13